mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 07:20:54 +07:00
1d68d2612c
We've been suffering from the uncertainty of the SCI_EVT clearing timing.
This patch implements 3 of 4 possible modes to handle SCI_EVT clearing
variations. The old behavior is kept in this patch.
Status: QR_EC is re-checked as early as possible after checking previous
SCI_EVT. This always leads to 2 QR_EC transactions per SCI_EVT
indication and the target may implement event queue which returns
0x00 indicating "no outstanding event".
This is proven to be a conflict against Windows behavior, but is
still kept in this patch to make the EC driver robust to the
possible regressions that may occur on Samsung platforms.
Query: QR_EC is re-checked after the target has handled the QR_EC query
request command pushed by the host.
Event: QR_EC is re-checked after the target has noticed the query event
response data pulled by the host.
This timing is not determined by any IRQs, so we may need to use a
guard period in this mode, which may explain the existence of the
ec_guard() code used by the old EC driver where the re-check timing
is implemented in the similar way as this mode.
Method: QR_EC is re-checked as late as possible after completing the _Qxx
evaluation. The target may implement SCI_EVT like a level triggered
interrupt.
It is proven on kernel bugzilla 94411 that, Windows will have all
_Qxx evaluations parallelized. Thus unless required by further
evidences, we needn't implement this mode as it is a conflict of
the _Qxx parallelism requirement.
Note that, according to the reports, there are platforms that cannot be
handled using the "Status" mode without enabling the
EC_FLAGS_QUERY_HANDSHAKE quirk. But they can be handled with the other
modes according to the tests (kernel bugzilla 97381).
The following log entry can be used to confirm the differences of the 3
modes as it should appear at the different positions for the 3 modes:
Command(QR_EC) unblocked
Status: appearing after
EC_SC(W) = 0x84
Query: appearing after
EC_DATA(R) = 0xXX
where XX is the event number used to determine _QXX
Event: appearing after first
EC_SC(R) = 0xX0 SCI_EVT=x BURST=0 CMD=0 IBF=0 OBF=0
that is next to the following log entry:
Command(QR_EC) completed by hardware
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97381
Link: https://bugzilla.kernel.org/show_bug.cgi?id=98111
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-and-tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Reported-and-tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|---|---|---|
| .. | ||
| acpica | ||
| apei | ||
| pmic | ||
| ac.c | ||
| acpi_apd.c | ||
| acpi_cmos_rtc.c | ||
| acpi_extlog.c | ||
| acpi_ipmi.c | ||
| acpi_lpat.c | ||
| acpi_lpss.c | ||
| acpi_memhotplug.c | ||
| acpi_pad.c | ||
| acpi_platform.c | ||
| acpi_pnp.c | ||
| acpi_processor.c | ||
| battery.c | ||
| battery.h | ||
| bgrt.c | ||
| blacklist.c | ||
| bus.c | ||
| button.c | ||
| cm_sbs.c | ||
| container.c | ||
| custom_method.c | ||
| debugfs.c | ||
| device_pm.c | ||
| dock.c | ||
| ec_sys.c | ||
| ec.c | ||
| event.c | ||
| fan.c | ||
| glue.c | ||
| gsi.c | ||
| hed.c | ||
| int340x_thermal.c | ||
| internal.h | ||
| ioapic.c | ||
| Kconfig | ||
| Makefile | ||
| numa.c | ||
| nvs.c | ||
| osl.c | ||
| pci_irq.c | ||
| pci_link.c | ||
| pci_root.c | ||
| pci_slot.c | ||
| power.c | ||
| proc.c | ||
| processor_core.c | ||
| processor_driver.c | ||
| processor_idle.c | ||
| processor_pdc.c | ||
| processor_perflib.c | ||
| processor_thermal.c | ||
| processor_throttling.c | ||
| property.c | ||
| reboot.c | ||
| resource.c | ||
| sbs.c | ||
| sbshc.c | ||
| sbshc.h | ||
| scan.c | ||
| sleep.c | ||
| sleep.h | ||
| sysfs.c | ||
| tables.c | ||
| thermal.c | ||
| utils.c | ||
| video_detect.c | ||
| video.c | ||
| wakeup.c | ||