mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 07:35:20 +07:00
1d2f46814d
Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.
There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.
The special GPIO enable DT property for the enable GPIO is
nonstandard but this was accomodated in
commit 6a537d4846
"gpio: of: Support regulator nonstandard GPIO properties".
Cc: patches@opensource.cirrus.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
440 lines
11 KiB
C
440 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Speyside modules for Cragganmore - board data probing
|
|
//
|
|
// Copyright 2011 Wolfson Microelectronics plc
|
|
// Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/gpio/machine.h>
|
|
|
|
#include <linux/mfd/wm831x/irq.h>
|
|
#include <linux/mfd/wm831x/gpio.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/arizona/pdata.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <sound/wm0010.h>
|
|
#include <sound/wm2200.h>
|
|
#include <sound/wm5100.h>
|
|
#include <sound/wm8996.h>
|
|
#include <sound/wm8962.h>
|
|
#include <sound/wm9081.h>
|
|
|
|
#include <linux/platform_data/spi-s3c64xx.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include "crag6410.h"
|
|
|
|
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
|
|
.line = S3C64XX_GPC(3),
|
|
};
|
|
|
|
static struct wm0010_pdata wm0010_pdata = {
|
|
.gpio_reset = S3C64XX_GPN(6),
|
|
.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
|
|
};
|
|
|
|
static struct spi_board_info wm1253_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm0010",
|
|
.max_speed_hz = 26 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
.irq = S3C_EINT(4),
|
|
.controller_data = &wm0010_spi_csinfo,
|
|
.platform_data = &wm0010_pdata,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info balblair_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm0010",
|
|
.max_speed_hz = 26 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
.irq = S3C_EINT(4),
|
|
.controller_data = &wm0010_spi_csinfo,
|
|
.platform_data = &wm0010_pdata,
|
|
},
|
|
};
|
|
|
|
static struct wm5100_pdata wm5100_pdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
|
|
.in_mode = {
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_SE,
|
|
},
|
|
|
|
.hp_pol = CODEC_GPIO_BASE + 3,
|
|
.jack_modes = {
|
|
{ WM5100_MICDET_MICBIAS3, 0, 0 },
|
|
{ WM5100_MICDET_MICBIAS2, 1, 1 },
|
|
},
|
|
|
|
.gpio_defaults = {
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0x2, /* IRQ: CMOS output */
|
|
0x3, /* CLKOUT: CMOS output */
|
|
},
|
|
};
|
|
|
|
static struct wm8996_retune_mobile_config wm8996_retune[] = {
|
|
{
|
|
.name = "Sub LPF",
|
|
.rate = 48000,
|
|
.regs = {
|
|
0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
|
|
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
|
|
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
|
|
},
|
|
},
|
|
{
|
|
.name = "Sub HPF",
|
|
.rate = 48000,
|
|
.regs = {
|
|
0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
|
|
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
|
|
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct wm8996_pdata wm8996_pdata __initdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.micdet_def = 1,
|
|
.inl_mode = WM8996_DIFFERRENTIAL_1,
|
|
.inr_mode = WM8996_DIFFERRENTIAL_1,
|
|
|
|
.irq_flags = IRQF_TRIGGER_RISING,
|
|
|
|
.gpio_default = {
|
|
0x8001, /* GPIO1 == ADCLRCLK1 */
|
|
0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
|
|
0x0141, /* GPIO3 == HP_SEL */
|
|
0x0002, /* GPIO4 == IRQ */
|
|
0x020e, /* GPIO5 == CLKOUT */
|
|
},
|
|
|
|
.retune_mobile_cfgs = wm8996_retune,
|
|
.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
|
|
};
|
|
|
|
static struct wm8962_pdata wm8962_pdata __initdata = {
|
|
.gpio_init = {
|
|
0,
|
|
WM8962_GPIO_FN_OPCLK,
|
|
WM8962_GPIO_FN_DMICCLK,
|
|
0,
|
|
0x8000 | WM8962_GPIO_FN_DMICDAT,
|
|
WM8962_GPIO_FN_IRQ, /* Open drain mode */
|
|
},
|
|
.in4_dc_measure = true,
|
|
};
|
|
|
|
static struct wm9081_pdata wm9081_pdata __initdata = {
|
|
.irq_high = false,
|
|
.irq_cmos = false,
|
|
};
|
|
|
|
static const struct i2c_board_info wm1254_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8996", 0x1a),
|
|
.platform_data = &wm8996_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static const struct i2c_board_info wm1255_devs[] = {
|
|
{ I2C_BOARD_INFO("wm5100", 0x1a),
|
|
.platform_data = &wm5100_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static const struct i2c_board_info wm1259_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8962", 0x1a),
|
|
.platform_data = &wm8962_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data wm8994_ldo1 = {
|
|
.supply_regulator = "WALLVDD",
|
|
};
|
|
|
|
static struct regulator_init_data wm8994_ldo2 = {
|
|
.supply_regulator = "WALLVDD",
|
|
};
|
|
|
|
static struct wm8994_pdata wm8994_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.micb2_delay = 150,
|
|
.gpio_defaults = {
|
|
0x3, /* IRQ out, active high, CMOS */
|
|
},
|
|
.ldo = {
|
|
{ .init_data = &wm8994_ldo1, },
|
|
{ .init_data = &wm8994_ldo2, },
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm1277_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
|
|
.platform_data = &wm8994_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
.dev_name = "wm8958",
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table wm8994_gpiod_table = {
|
|
.dev_id = "i2c-wm8958", /* I2C device name */
|
|
.table = {
|
|
GPIO_LOOKUP("GPION", 6,
|
|
"wlf,ldo1ena", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("GPION", 4,
|
|
"wlf,ldo2ena", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct arizona_pdata wm5102_reva_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.micd_pol_gpio = CODEC_GPIO_BASE + 4,
|
|
.micd_rate = 6,
|
|
.gpio_defaults = {
|
|
[2] = 0x10000, /* AIF3TXLRCLK */
|
|
[3] = 0x4, /* OPCLK */
|
|
},
|
|
};
|
|
|
|
static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
|
|
.line = S3C64XX_GPN(5),
|
|
};
|
|
|
|
static struct spi_board_info wm5102_reva_spi_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm5102",
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
|
WM831X_IRQ_GPIO_2,
|
|
.controller_data = &codec_spi_csinfo,
|
|
.platform_data = &wm5102_reva_pdata,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
|
|
.dev_id = "spi0.1", /* SPI device name */
|
|
.table = {
|
|
GPIO_LOOKUP("GPION", 7,
|
|
"wlf,ldoena", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct arizona_pdata wm5102_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.micd_pol_gpio = CODEC_GPIO_BASE + 2,
|
|
.gpio_defaults = {
|
|
[2] = 0x10000, /* AIF3TXLRCLK */
|
|
[3] = 0x4, /* OPCLK */
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info wm5102_spi_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm5102",
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
|
WM831X_IRQ_GPIO_2,
|
|
.controller_data = &codec_spi_csinfo,
|
|
.platform_data = &wm5102_pdata,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table wm5102_gpiod_table = {
|
|
.dev_id = "spi0.1", /* SPI device name */
|
|
.table = {
|
|
GPIO_LOOKUP("GPION", 7,
|
|
"wlf,ldo1ena", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info wm5110_spi_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm5110",
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
|
WM831X_IRQ_GPIO_2,
|
|
.controller_data = &codec_spi_csinfo,
|
|
.platform_data = &wm5102_reva_pdata,
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm6230_i2c_devs[] = {
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static struct wm2200_pdata wm2200_pdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.gpio_defaults = {
|
|
[2] = 0x0005, /* GPIO3 24.576MHz output clock */
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm2200_i2c[] = {
|
|
{ I2C_BOARD_INFO("wm2200", 0x3a),
|
|
.platform_data = &wm2200_pdata, },
|
|
};
|
|
|
|
static const struct {
|
|
u8 id;
|
|
u8 rev;
|
|
const char *name;
|
|
const struct i2c_board_info *i2c_devs;
|
|
int num_i2c_devs;
|
|
const struct spi_board_info *spi_devs;
|
|
int num_spi_devs;
|
|
} gf_mods[] = {
|
|
{ .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
|
|
{ .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
|
|
{ .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
|
|
{ .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
|
|
{ .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
|
|
.spi_devs = wm5110_spi_devs,
|
|
.num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
|
|
{ .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
|
|
{ .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
|
|
{ .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
|
|
{ .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
|
|
{ .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
|
|
{ .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
|
|
{ .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
|
|
.i2c_devs = wm6230_i2c_devs,
|
|
.num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
|
|
{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
|
|
{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
|
|
{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
|
|
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
|
|
{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
|
|
{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
|
|
{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
|
|
.spi_devs = balblair_devs,
|
|
.num_spi_devs = ARRAY_SIZE(balblair_devs) },
|
|
{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
|
|
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
|
|
{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
|
|
.i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
|
|
{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
|
|
.i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
|
|
{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
|
|
{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
|
|
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
|
|
{ .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
|
|
.spi_devs = wm5102_reva_spi_devs,
|
|
.num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) },
|
|
{ .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
|
|
.spi_devs = wm5102_spi_devs,
|
|
.num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
|
|
{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
|
|
.i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
|
|
};
|
|
|
|
static int wlf_gf_module_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *i2c_id)
|
|
{
|
|
int ret, i, j, id, rev;
|
|
|
|
ret = i2c_smbus_read_byte_data(i2c, 0);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
id = (ret & 0xfe) >> 2;
|
|
rev = ret & 0x3;
|
|
for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
|
|
if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
|
|
rev == gf_mods[i].rev))
|
|
break;
|
|
|
|
gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
|
|
gpiod_add_lookup_table(&wm5102_gpiod_table);
|
|
gpiod_add_lookup_table(&wm8994_gpiod_table);
|
|
|
|
if (i < ARRAY_SIZE(gf_mods)) {
|
|
dev_info(&i2c->dev, "%s revision %d\n",
|
|
gf_mods[i].name, rev + 1);
|
|
|
|
for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
|
|
if (!i2c_new_device(i2c->adapter,
|
|
&(gf_mods[i].i2c_devs[j])))
|
|
dev_err(&i2c->dev,
|
|
"Failed to register dev: %d\n", ret);
|
|
}
|
|
|
|
spi_register_board_info(gf_mods[i].spi_devs,
|
|
gf_mods[i].num_spi_devs);
|
|
} else {
|
|
dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
|
|
id, rev + 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wlf_gf_module_id[] = {
|
|
{ "wlf-gf-module", 0 },
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_driver wlf_gf_module_driver = {
|
|
.driver = {
|
|
.name = "wlf-gf-module"
|
|
},
|
|
.probe = wlf_gf_module_probe,
|
|
.id_table = wlf_gf_module_id,
|
|
};
|
|
|
|
static int __init wlf_gf_module_register(void)
|
|
{
|
|
if (!soc_is_s3c64xx())
|
|
return 0;
|
|
|
|
return i2c_add_driver(&wlf_gf_module_driver);
|
|
}
|
|
device_initcall(wlf_gf_module_register);
|