AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-25 20:35:17 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
1d04a64a0a
linux_dsm_epyc7002/drivers/gpu/drm/bridge/chrontel-ch7033.c
Laurent Pinchart 12c683e12c drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid() 
When validating a mode, bridges may need to do so in the context of a
display, as specified by drm_display_info. An example is the meson
dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to
perform clock calculations.

Bridges that need the display info currently retrieve it from the
drm_connector created by the bridge. This gets in the way of moving
connector creation out of bridge drivers. To make this possible, pass
the drm_display_info to drm_bridge_funcs .mode_valid().

Changes to the bridge drivers have been performed with the following
coccinelle semantic patch and have been compile-tested.

@ rule1 @
identifier funcs;
identifier fn;
@@
 struct drm_bridge_funcs funcs = {
 	...,
 	.mode_valid = fn
 };

@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
identifier mode;
@@
 enum drm_mode_status fn(
 	struct drm_bridge *bridge,
+	const struct drm_display_info *info,
 	const struct drm_display_mode *mode
 )
 {
 	...
 }

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part:
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
2020-06-23 19:53:27 +02:00

622 lines
15 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Chrontel CH7033 Video Encoder Driver
*
* Copyright (C) 2019,2020 Lubomir Rintel
*/
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_edid.h>
#include <drm/drm_of.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
/* Page 0, Register 0x07 */
enum {
DRI_PD = BIT(3),
IO_PD = BIT(5),
};
/* Page 0, Register 0x08 */
enum {
DRI_PDDRI = GENMASK(7, 4),
PDDAC = GENMASK(3, 1),
PANEN = BIT(0),
};
/* Page 0, Register 0x09 */
enum {
DPD = BIT(7),
GCKOFF = BIT(6),
TV_BP = BIT(5),
SCLPD = BIT(4),
SDPD = BIT(3),
VGA_PD = BIT(2),
HDBKPD = BIT(1),
HDMI_PD = BIT(0),
};
/* Page 0, Register 0x0a */
enum {
MEMINIT = BIT(7),
MEMIDLE = BIT(6),
MEMPD = BIT(5),
STOP = BIT(4),
LVDS_PD = BIT(3),
HD_DVIB = BIT(2),
HDCP_PD = BIT(1),
MCU_PD = BIT(0),
};
/* Page 0, Register 0x18 */
enum {
IDF = GENMASK(7, 4),
INTEN = BIT(3),
SWAP = GENMASK(2, 0),
};
enum {
BYTE_SWAP_RGB = 0,
BYTE_SWAP_RBG = 1,
BYTE_SWAP_GRB = 2,
BYTE_SWAP_GBR = 3,
BYTE_SWAP_BRG = 4,
BYTE_SWAP_BGR = 5,
};
/* Page 0, Register 0x19 */
enum {
HPO_I = BIT(5),
VPO_I = BIT(4),
DEPO_I = BIT(3),
CRYS_EN = BIT(2),
GCLKFREQ = GENMASK(2, 0),
};
/* Page 0, Register 0x2e */
enum {
HFLIP = BIT(7),
VFLIP = BIT(6),
DEPO_O = BIT(5),
HPO_O = BIT(4),
VPO_O = BIT(3),
TE = GENMASK(2, 0),
};
/* Page 0, Register 0x2b */
enum {
SWAPS = GENMASK(7, 4),
VFMT = GENMASK(3, 0),
};
/* Page 0, Register 0x54 */
enum {
COMP_BP = BIT(7),
DAC_EN_T = BIT(6),
HWO_HDMI_HI = GENMASK(5, 3),
HOO_HDMI_HI = GENMASK(2, 0),
};
/* Page 0, Register 0x57 */
enum {
FLDSEN = BIT(7),
VWO_HDMI_HI = GENMASK(5, 3),
VOO_HDMI_HI = GENMASK(2, 0),
};
/* Page 0, Register 0x7e */
enum {
HDMI_LVDS_SEL = BIT(7),
DE_GEN = BIT(6),
PWM_INDEX_HI = BIT(5),
USE_DE = BIT(4),
R_INT = GENMASK(3, 0),
};
/* Page 1, Register 0x07 */
enum {
BPCKSEL = BIT(7),
DRI_CMFB_EN = BIT(6),
CEC_PUEN = BIT(5),
CEC_T = BIT(3),
CKINV = BIT(2),
CK_TVINV = BIT(1),
DRI_CKS2 = BIT(0),
};
/* Page 1, Register 0x08 */
enum {
DACG = BIT(6),
DACKTST = BIT(5),
DEDGEB = BIT(4),
SYO = BIT(3),
DRI_IT_LVDS = GENMASK(2, 1),
DISPON = BIT(0),
};
/* Page 1, Register 0x0c */
enum {
DRI_PLL_CP = GENMASK(7, 6),
DRI_PLL_DIVSEL = BIT(5),
DRI_PLL_N1_1 = BIT(4),
DRI_PLL_N1_0 = BIT(3),
DRI_PLL_N3_1 = BIT(2),
DRI_PLL_N3_0 = BIT(1),
DRI_PLL_CKTSTEN = BIT(0),
};
/* Page 1, Register 0x6b */
enum {
VCO3CS = GENMASK(7, 6),
ICPGBK2_0 = GENMASK(5, 3),
DRI_VCO357SC = BIT(2),
PDPLL2 = BIT(1),
DRI_PD_SER = BIT(0),
};
/* Page 1, Register 0x6c */
enum {
PLL2N11 = GENMASK(7, 4),
PLL2N5_4 = BIT(3),
PLL2N5_TOP = BIT(2),
DRI_PLL_PD = BIT(1),
PD_I2CM = BIT(0),
};
/* Page 3, Register 0x28 */
enum {
DIFF_EN = GENMASK(7, 6),
CORREC_EN = GENMASK(5, 4),
VGACLK_BP = BIT(3),
HM_LV_SEL = BIT(2),
HD_VGA_SEL = BIT(1),
};
/* Page 3, Register 0x2a */
enum {
LVDSCLK_BP = BIT(7),
HDTVCLK_BP = BIT(6),
HDMICLK_BP = BIT(5),
HDTV_BP = BIT(4),
HDMI_BP = BIT(3),
THRWL = GENMASK(2, 0),
};
/* Page 4, Register 0x52 */
enum {
PGM_ARSTB = BIT(7),
MCU_ARSTB = BIT(6),
MCU_RETB = BIT(2),
RESETIB = BIT(1),
RESETDB = BIT(0),
};
struct ch7033_priv {
struct regmap *regmap;
struct drm_bridge *next_bridge;
struct drm_bridge bridge;
struct drm_connector connector;
};
#define conn_to_ch7033_priv(x) \
container_of(x, struct ch7033_priv, connector)
#define bridge_to_ch7033_priv(x) \
container_of(x, struct ch7033_priv, bridge)
static enum drm_connector_status ch7033_connector_detect(
struct drm_connector *connector, bool force)
{
struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
return drm_bridge_detect(priv->next_bridge);
}
static const struct drm_connector_funcs ch7033_connector_funcs = {
.reset = drm_atomic_helper_connector_reset,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = ch7033_connector_detect,
.destroy = drm_connector_cleanup,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static int ch7033_connector_get_modes(struct drm_connector *connector)
{
struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
struct edid *edid;
int ret;
edid = drm_bridge_get_edid(priv->next_bridge, connector);
drm_connector_update_edid_property(connector, edid);
if (edid) {
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
} else {
ret = drm_add_modes_noedid(connector, 1920, 1080);
drm_set_preferred_mode(connector, 1024, 768);
}
return ret;
}
static struct drm_encoder *ch7033_connector_best_encoder(
struct drm_connector *connector)
{
struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
return priv->bridge.encoder;
}
static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = {
.get_modes = ch7033_connector_get_modes,
.best_encoder = ch7033_connector_best_encoder,
};
static void ch7033_hpd_event(void *arg, enum drm_connector_status status)
{
struct ch7033_priv *priv = arg;
if (priv->bridge.dev)
drm_helper_hpd_irq_event(priv->connector.dev);
}
static int ch7033_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
struct drm_connector *connector = &priv->connector;
int ret;
ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge,
DRM_BRIDGE_ATTACH_NO_CONNECTOR);
if (ret)
return ret;
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
return 0;
if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) {
connector->polled = DRM_CONNECTOR_POLL_HPD;
} else {
connector->polled = DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT;
}
if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event,
priv);
}
drm_connector_helper_add(connector,
&ch7033_connector_helper_funcs);
ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector,
&ch7033_connector_funcs,
priv->next_bridge->type,
priv->next_bridge->ddc);
if (ret) {
DRM_ERROR("Failed to initialize connector\n");
return ret;
}
return drm_connector_attach_encoder(&priv->connector, bridge->encoder);
}
static void ch7033_bridge_detach(struct drm_bridge *bridge)
{
struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD)
drm_bridge_hpd_disable(priv->next_bridge);
drm_connector_cleanup(&priv->connector);
}
static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_info *info,
const struct drm_display_mode *mode)
{
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
if (mode->hdisplay >= 1920)
return MODE_BAD_HVALUE;
if (mode->vdisplay >= 1080)
return MODE_BAD_VVALUE;
return MODE_OK;
}
static void ch7033_bridge_disable(struct drm_bridge *bridge)
{
struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
regmap_write(priv->regmap, 0x03, 0x04);
regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00);
}
static void ch7033_bridge_enable(struct drm_bridge *bridge)
{
struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
regmap_write(priv->regmap, 0x03, 0x04);
regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB);
}
static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adjusted_mode)
{
struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
int hbporch = mode->hsync_start - mode->hdisplay;
int hsynclen = mode->hsync_end - mode->hsync_start;
int vbporch = mode->vsync_start - mode->vdisplay;
int vsynclen = mode->vsync_end - mode->vsync_start;
/*
* Page 4
*/
regmap_write(priv->regmap, 0x03, 0x04);
/* Turn everything off to set all the registers to their defaults. */
regmap_write(priv->regmap, 0x52, 0x00);
/* Bring I/O block up. */
regmap_write(priv->regmap, 0x52, RESETIB);
/*
* Page 0
*/
regmap_write(priv->regmap, 0x03, 0x00);
/* Bring up parts we need from the power down. */
regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0);
regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0);
regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF |
HDMI_PD | VGA_PD, 0);
regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0);
/* Horizontal input timing. */
regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 |
(mode->hdisplay >> 8));
regmap_write(priv->regmap, 0x0c, mode->hdisplay);
regmap_write(priv->regmap, 0x0d, mode->htotal);
regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 |
(hbporch >> 8));
regmap_write(priv->regmap, 0x0f, hbporch);
regmap_write(priv->regmap, 0x10, hsynclen);
/* Vertical input timing. */
regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 |
(mode->vdisplay >> 8));
regmap_write(priv->regmap, 0x12, mode->vdisplay);
regmap_write(priv->regmap, 0x13, mode->vtotal);
regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) |
(vbporch >> 8));
regmap_write(priv->regmap, 0x15, vbporch);
regmap_write(priv->regmap, 0x16, vsynclen);
/* Input color swap. */
regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR);
/* Input clock and sync polarity. */
regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16);
regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ,
(mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 |
(mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 |
mode->clock >> 16);
regmap_write(priv->regmap, 0x1a, mode->clock >> 8);
regmap_write(priv->regmap, 0x1b, mode->clock);
/* Horizontal output timing. */
regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 |
(mode->hdisplay >> 8));
regmap_write(priv->regmap, 0x20, mode->hdisplay);
regmap_write(priv->regmap, 0x21, mode->htotal);
/* Vertical output timing. */
regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 |
(mode->vdisplay >> 8));
regmap_write(priv->regmap, 0x26, mode->vdisplay);
regmap_write(priv->regmap, 0x27, mode->vtotal);
/* VGA channel bypass */
regmap_update_bits(priv->regmap, 0x2b, VFMT, 9);
/* Output sync polarity. */
regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O,
(mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 |
(mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0);
/* HDMI horizontal output timing. */
regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI,
(hsynclen >> 8) << 3 |
(hbporch >> 8));
regmap_write(priv->regmap, 0x55, hbporch);
regmap_write(priv->regmap, 0x56, hsynclen);
/* HDMI vertical output timing. */
regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI,
(vsynclen >> 8) << 3 |
(vbporch >> 8));
regmap_write(priv->regmap, 0x58, vbporch);
regmap_write(priv->regmap, 0x59, vsynclen);
/* Pick HDMI, not LVDS. */
regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL);
/*
* Page 1
*/
regmap_write(priv->regmap, 0x03, 0x01);
/* No idea what these do, but VGA is wobbly and blinky without them. */
regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV);
regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON);
/* DRI PLL */
regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL);
if (mode->clock <= 40000) {
regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
DRI_PLL_N1_0 |
DRI_PLL_N3_1 |
DRI_PLL_N3_0,
0);
} else if (mode->clock < 80000) {
regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
DRI_PLL_N1_0 |
DRI_PLL_N3_1 |
DRI_PLL_N3_0,
DRI_PLL_N3_0 |
DRI_PLL_N1_0);
} else {
regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
DRI_PLL_N1_0 |
DRI_PLL_N3_1 |
DRI_PLL_N3_0,
DRI_PLL_N3_1 |
DRI_PLL_N1_1);
}
/* This seems to be color calibration for VGA. */
regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */
regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */
regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */
regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */
regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */
regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */
regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00);
regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00);
/*
* Page 3
*/
regmap_write(priv->regmap, 0x03, 0x03);
/* More bypasses and apparently another HDMI/LVDS selector. */
regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL,
VGACLK_BP | HM_LV_SEL);
regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP,
HDMICLK_BP | HDMI_BP);
/*
* Page 4
*/
regmap_write(priv->regmap, 0x03, 0x04);
/* Output clock. */
regmap_write(priv->regmap, 0x10, mode->clock >> 16);
regmap_write(priv->regmap, 0x11, mode->clock >> 8);
regmap_write(priv->regmap, 0x12, mode->clock);
}
static const struct drm_bridge_funcs ch7033_bridge_funcs = {
.attach = ch7033_bridge_attach,
.detach = ch7033_bridge_detach,
.mode_valid = ch7033_bridge_mode_valid,
.disable = ch7033_bridge_disable,
.enable = ch7033_bridge_enable,
.mode_set = ch7033_bridge_mode_set,
};
static const struct regmap_config ch7033_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x7f,
};
static int ch7033_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct ch7033_priv *priv;
unsigned int val;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
dev_set_drvdata(dev, priv);
ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL,
&priv->next_bridge);
if (ret)
return ret;
priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config);
if (IS_ERR(priv->regmap)) {
dev_err(&client->dev, "regmap init failed\n");
return PTR_ERR(priv->regmap);
}
ret = regmap_read(priv->regmap, 0x00, &val);
if (ret < 0) {
dev_err(&client->dev, "error reading the model id: %d\n", ret);
return ret;
}
if ((val & 0xf7) != 0x56) {
dev_err(&client->dev, "the device is not a ch7033\n");
return -ENODEV;
}
regmap_write(priv->regmap, 0x03, 0x04);
ret = regmap_read(priv->regmap, 0x51, &val);
if (ret < 0) {
dev_err(&client->dev, "error reading the model id: %d\n", ret);
return ret;
}
if ((val & 0x0f) != 3) {
dev_err(&client->dev, "unknown revision %u\n", val);
return -ENODEV;
}
INIT_LIST_HEAD(&priv->bridge.list);
priv->bridge.funcs = &ch7033_bridge_funcs;
priv->bridge.of_node = dev->of_node;
drm_bridge_add(&priv->bridge);
dev_info(dev, "Chrontel CH7033 Video Encoder\n");
return 0;
}
static int ch7033_remove(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct ch7033_priv *priv = dev_get_drvdata(dev);
drm_bridge_remove(&priv->bridge);
return 0;
}
static const struct of_device_id ch7033_dt_ids[] = {
{ .compatible = "chrontel,ch7033", },
{ }
};
MODULE_DEVICE_TABLE(of, ch7033_dt_ids);
static const struct i2c_device_id ch7033_ids[] = {
{ "ch7033", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ch7033_ids);
static struct i2c_driver ch7033_driver = {
.probe = ch7033_probe,
.remove = ch7033_remove,
.driver = {
.name = "ch7033",
.of_match_table = of_match_ptr(ch7033_dt_ids),
},
.id_table = ch7033_ids,
};
module_i2c_driver(ch7033_driver);
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink