linux_dsm_epyc7002/drivers/input/misc/ati_remote2.c
Dmitry Torokhov 1f7930c55e Input: ati_remote2 - switch to using new keycode interface
Switch the code to use new style of getkeycode and setkeycode
methods to allow retrieving and setting keycodes not only by
their scancodes but also by index.

Acked-by: Ville Syrjälä <syrjala@sci.fi>
Tested-by: Jarod Wilson <jarod@wilsonet.com>
Tested-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-15 23:10:53 -07:00

1029 lines
24 KiB
C

/*
* ati_remote2 - ATI/Philips USB RF remote driver
*
* Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
* Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*/
#include <linux/usb/input.h>
#include <linux/slab.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.3"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
MODULE_LICENSE("GPL");
/*
* ATI Remote Wonder II Channel Configuration
*
* The remote control can by assigned one of sixteen "channels" in order to facilitate
* the use of multiple remote controls within range of each other.
* A remote's "channel" may be altered by pressing and holding the "PC" button for
* approximately 3 seconds, after which the button will slowly flash the count of the
* currently configured "channel", using the numeric keypad enter a number between 1 and
* 16 and then press the "PC" button again, the button will slowly flash the count of the
* newly configured "channel".
*/
enum {
ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
};
static int ati_remote2_set_mask(const char *val,
const struct kernel_param *kp,
unsigned int max)
{
unsigned long mask;
int ret;
if (!val)
return -EINVAL;
ret = strict_strtoul(val, 0, &mask);
if (ret)
return ret;
if (mask & ~max)
return -EINVAL;
*(unsigned int *)kp->arg = mask;
return 0;
}
static int ati_remote2_set_channel_mask(const char *val,
const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
}
static int ati_remote2_get_channel_mask(char *buffer,
const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
}
static int ati_remote2_set_mode_mask(const char *val,
const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
}
static int ati_remote2_get_mode_mask(char *buffer,
const struct kernel_param *kp)
{
pr_debug("%s()\n", __func__);
return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
}
static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
static struct kernel_param_ops param_ops_channel_mask = {
.set = ati_remote2_set_channel_mask,
.get = ati_remote2_get_channel_mask,
};
module_param(channel_mask, channel_mask, 0644);
MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
static struct kernel_param_ops param_ops_mode_mask = {
.set = ati_remote2_set_mode_mask,
.get = ati_remote2_get_mode_mask,
};
module_param(mode_mask, mode_mask, 0644);
MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
static struct usb_device_id ati_remote2_id_table[] = {
{ USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
{ }
};
MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
static DEFINE_MUTEX(ati_remote2_mutex);
enum {
ATI_REMOTE2_OPENED = 0x1,
ATI_REMOTE2_SUSPENDED = 0x2,
};
enum {
ATI_REMOTE2_AUX1,
ATI_REMOTE2_AUX2,
ATI_REMOTE2_AUX3,
ATI_REMOTE2_AUX4,
ATI_REMOTE2_PC,
ATI_REMOTE2_MODES,
};
static const struct {
u8 hw_code;
u16 keycode;
} ati_remote2_key_table[] = {
{ 0x00, KEY_0 },
{ 0x01, KEY_1 },
{ 0x02, KEY_2 },
{ 0x03, KEY_3 },
{ 0x04, KEY_4 },
{ 0x05, KEY_5 },
{ 0x06, KEY_6 },
{ 0x07, KEY_7 },
{ 0x08, KEY_8 },
{ 0x09, KEY_9 },
{ 0x0c, KEY_POWER },
{ 0x0d, KEY_MUTE },
{ 0x10, KEY_VOLUMEUP },
{ 0x11, KEY_VOLUMEDOWN },
{ 0x20, KEY_CHANNELUP },
{ 0x21, KEY_CHANNELDOWN },
{ 0x28, KEY_FORWARD },
{ 0x29, KEY_REWIND },
{ 0x2c, KEY_PLAY },
{ 0x30, KEY_PAUSE },
{ 0x31, KEY_STOP },
{ 0x37, KEY_RECORD },
{ 0x38, KEY_DVD },
{ 0x39, KEY_TV },
{ 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
{ 0x54, KEY_MENU },
{ 0x58, KEY_UP },
{ 0x59, KEY_DOWN },
{ 0x5a, KEY_LEFT },
{ 0x5b, KEY_RIGHT },
{ 0x5c, KEY_OK },
{ 0x78, KEY_A },
{ 0x79, KEY_B },
{ 0x7a, KEY_C },
{ 0x7b, KEY_D },
{ 0x7c, KEY_E },
{ 0x7d, KEY_F },
{ 0x82, KEY_ENTER },
{ 0x8e, KEY_VENDOR },
{ 0x96, KEY_COFFEE },
{ 0xa9, BTN_LEFT },
{ 0xaa, BTN_RIGHT },
{ 0xbe, KEY_QUESTION },
{ 0xd0, KEY_EDIT },
{ 0xd5, KEY_FRONT },
{ 0xf9, KEY_INFO },
};
struct ati_remote2 {
struct input_dev *idev;
struct usb_device *udev;
struct usb_interface *intf[2];
struct usb_endpoint_descriptor *ep[2];
struct urb *urb[2];
void *buf[2];
dma_addr_t buf_dma[2];
unsigned long jiffies;
int mode;
char name[64];
char phys[64];
/* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
unsigned int flags;
unsigned int channel_mask;
unsigned int mode_mask;
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
static void ati_remote2_disconnect(struct usb_interface *interface);
static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
static int ati_remote2_resume(struct usb_interface *interface);
static int ati_remote2_reset_resume(struct usb_interface *interface);
static int ati_remote2_pre_reset(struct usb_interface *interface);
static int ati_remote2_post_reset(struct usb_interface *interface);
static struct usb_driver ati_remote2_driver = {
.name = "ati_remote2",
.probe = ati_remote2_probe,
.disconnect = ati_remote2_disconnect,
.id_table = ati_remote2_id_table,
.suspend = ati_remote2_suspend,
.resume = ati_remote2_resume,
.reset_resume = ati_remote2_reset_resume,
.pre_reset = ati_remote2_pre_reset,
.post_reset = ati_remote2_post_reset,
.supports_autosuspend = 1,
};
static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
{
int r;
r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
if (r) {
dev_err(&ar2->intf[0]->dev,
"%s(): usb_submit_urb() = %d\n", __func__, r);
return r;
}
r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
if (r) {
usb_kill_urb(ar2->urb[0]);
dev_err(&ar2->intf[1]->dev,
"%s(): usb_submit_urb() = %d\n", __func__, r);
return r;
}
return 0;
}
static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
{
usb_kill_urb(ar2->urb[1]);
usb_kill_urb(ar2->urb[0]);
}
static int ati_remote2_open(struct input_dev *idev)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
int r;
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
r = usb_autopm_get_interface(ar2->intf[0]);
if (r) {
dev_err(&ar2->intf[0]->dev,
"%s(): usb_autopm_get_interface() = %d\n", __func__, r);
goto fail1;
}
mutex_lock(&ati_remote2_mutex);
if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
r = ati_remote2_submit_urbs(ar2);
if (r)
goto fail2;
}
ar2->flags |= ATI_REMOTE2_OPENED;
mutex_unlock(&ati_remote2_mutex);
usb_autopm_put_interface(ar2->intf[0]);
return 0;
fail2:
mutex_unlock(&ati_remote2_mutex);
usb_autopm_put_interface(ar2->intf[0]);
fail1:
return r;
}
static void ati_remote2_close(struct input_dev *idev)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
mutex_lock(&ati_remote2_mutex);
if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
ati_remote2_kill_urbs(ar2);
ar2->flags &= ~ATI_REMOTE2_OPENED;
mutex_unlock(&ati_remote2_mutex);
}
static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
{
struct input_dev *idev = ar2->idev;
u8 *data = ar2->buf[0];
int channel, mode;
channel = data[0] >> 4;
if (!((1 << channel) & ar2->channel_mask))
return;
mode = data[0] & 0x0F;
if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[0]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
if (!((1 << mode) & ar2->mode_mask))
return;
input_event(idev, EV_REL, REL_X, (s8) data[1]);
input_event(idev, EV_REL, REL_Y, (s8) data[2]);
input_sync(idev);
}
static int ati_remote2_lookup(unsigned int hw_code)
{
int i;
for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
if (ati_remote2_key_table[i].hw_code == hw_code)
return i;
return -1;
}
static void ati_remote2_input_key(struct ati_remote2 *ar2)
{
struct input_dev *idev = ar2->idev;
u8 *data = ar2->buf[1];
int channel, mode, hw_code, index;
channel = data[0] >> 4;
if (!((1 << channel) & ar2->channel_mask))
return;
mode = data[0] & 0x0F;
if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[1]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
hw_code = data[2];
if (hw_code == 0x3f) {
/*
* For some incomprehensible reason the mouse pad generates
* events which look identical to the events from the last
* pressed mode key. Naturally we don't want to generate key
* events for the mouse pad so we filter out any subsequent
* events from the same mode key.
*/
if (ar2->mode == mode)
return;
if (data[1] == 0)
ar2->mode = mode;
}
if (!((1 << mode) & ar2->mode_mask))
return;
index = ati_remote2_lookup(hw_code);
if (index < 0) {
dev_err(&ar2->intf[1]->dev,
"Unknown code byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
switch (data[1]) {
case 0: /* release */
break;
case 1: /* press */
ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
break;
case 2: /* repeat */
/* No repeat for mouse buttons. */
if (ar2->keycode[mode][index] == BTN_LEFT ||
ar2->keycode[mode][index] == BTN_RIGHT)
return;
if (!time_after_eq(jiffies, ar2->jiffies))
return;
ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
break;
default:
dev_err(&ar2->intf[1]->dev,
"Unknown state byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
input_sync(idev);
}
static void ati_remote2_complete_mouse(struct urb *urb)
{
struct ati_remote2 *ar2 = urb->context;
int r;
switch (urb->status) {
case 0:
usb_mark_last_busy(ar2->udev);
ati_remote2_input_mouse(ar2);
break;
case -ENOENT:
case -EILSEQ:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&ar2->intf[0]->dev,
"%s(): urb status = %d\n", __func__, urb->status);
return;
default:
usb_mark_last_busy(ar2->udev);
dev_err(&ar2->intf[0]->dev,
"%s(): urb status = %d\n", __func__, urb->status);
}
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r)
dev_err(&ar2->intf[0]->dev,
"%s(): usb_submit_urb() = %d\n", __func__, r);
}
static void ati_remote2_complete_key(struct urb *urb)
{
struct ati_remote2 *ar2 = urb->context;
int r;
switch (urb->status) {
case 0:
usb_mark_last_busy(ar2->udev);
ati_remote2_input_key(ar2);
break;
case -ENOENT:
case -EILSEQ:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&ar2->intf[1]->dev,
"%s(): urb status = %d\n", __func__, urb->status);
return;
default:
usb_mark_last_busy(ar2->udev);
dev_err(&ar2->intf[1]->dev,
"%s(): urb status = %d\n", __func__, urb->status);
}
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r)
dev_err(&ar2->intf[1]->dev,
"%s(): usb_submit_urb() = %d\n", __func__, r);
}
static int ati_remote2_getkeycode(struct input_dev *idev,
struct input_keymap_entry *ke)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
unsigned int mode;
int offset;
unsigned int index;
unsigned int scancode;
if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
index = ke->index;
if (index >= ATI_REMOTE2_MODES *
ARRAY_SIZE(ati_remote2_key_table))
return -EINVAL;
mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code;
} else {
if (input_scancode_to_scalar(ke, &scancode))
return -EINVAL;
mode = scancode >> 8;
if (mode > ATI_REMOTE2_PC)
return -EINVAL;
offset = ati_remote2_lookup(scancode & 0xff);
if (offset < 0)
return -EINVAL;
index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset;
}
ke->keycode = ar2->keycode[mode][offset];
ke->len = sizeof(scancode);
memcpy(&ke->scancode, &scancode, sizeof(scancode));
ke->index = index;
return 0;
}
static int ati_remote2_setkeycode(struct input_dev *idev,
const struct input_keymap_entry *ke,
unsigned int *old_keycode)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
unsigned int mode;
int offset;
unsigned int index;
unsigned int scancode;
if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
if (ke->index >= ATI_REMOTE2_MODES *
ARRAY_SIZE(ati_remote2_key_table))
return -EINVAL;
mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
} else {
if (input_scancode_to_scalar(ke, &scancode))
return -EINVAL;
mode = scancode >> 8;
if (mode > ATI_REMOTE2_PC)
return -EINVAL;
offset = ati_remote2_lookup(scancode & 0xff);
if (offset < 0)
return -EINVAL;
}
*old_keycode = ar2->keycode[mode][offset];
ar2->keycode[mode][offset] = ke->keycode;
__set_bit(ke->keycode, idev->keybit);
for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
if (ar2->keycode[mode][index] == *old_keycode)
return 0;
}
}
__clear_bit(*old_keycode, idev->keybit);
return 0;
}
static int ati_remote2_input_init(struct ati_remote2 *ar2)
{
struct input_dev *idev;
int index, mode, retval;
idev = input_allocate_device();
if (!idev)
return -ENOMEM;
ar2->idev = idev;
input_set_drvdata(idev, ar2);
idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT);
idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
__set_bit(ar2->keycode[mode][index], idev->keybit);
}
}
/* AUX1-AUX4 and PC generate the same scancode. */
index = ati_remote2_lookup(0x3f);
ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
__set_bit(KEY_PROG1, idev->keybit);
__set_bit(KEY_PROG2, idev->keybit);
__set_bit(KEY_PROG3, idev->keybit);
__set_bit(KEY_PROG4, idev->keybit);
__set_bit(KEY_PC, idev->keybit);
idev->rep[REP_DELAY] = 250;
idev->rep[REP_PERIOD] = 33;
idev->open = ati_remote2_open;
idev->close = ati_remote2_close;
idev->getkeycode_new = ati_remote2_getkeycode;
idev->setkeycode_new = ati_remote2_setkeycode;
idev->name = ar2->name;
idev->phys = ar2->phys;
usb_to_input_id(ar2->udev, &idev->id);
idev->dev.parent = &ar2->udev->dev;
retval = input_register_device(idev);
if (retval)
input_free_device(idev);
return retval;
}
static int ati_remote2_urb_init(struct ati_remote2 *ar2)
{
struct usb_device *udev = ar2->udev;
int i, pipe, maxp;
for (i = 0; i < 2; i++) {
ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
if (!ar2->buf[i])
return -ENOMEM;
ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!ar2->urb[i])
return -ENOMEM;
pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
maxp = maxp > 4 ? 4 : maxp;
usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
ar2, ar2->ep[i]->bInterval);
ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
}
return 0;
}
static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
{
int i;
for (i = 0; i < 2; i++) {
usb_free_urb(ar2->urb[i]);
usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
}
}
static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
{
int r, i, channel;
/*
* Configure receiver to only accept input from remote "channel"
* channel == 0 -> Accept input from any remote channel
* channel == 1 -> Only accept input from remote channel 1
* channel == 2 -> Only accept input from remote channel 2
* ...
* channel == 16 -> Only accept input from remote channel 16
*/
channel = 0;
for (i = 0; i < 16; i++) {
if ((1 << i) & ch_mask) {
if (!(~(1 << i) & ch_mask))
channel = i + 1;
break;
}
}
r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
0x20,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (r) {
dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
__func__, r);
return r;
}
return 0;
}
static ssize_t ati_remote2_show_channel_mask(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct usb_device *udev = to_usb_device(dev);
struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
struct ati_remote2 *ar2 = usb_get_intfdata(intf);
return sprintf(buf, "0x%04x\n", ar2->channel_mask);
}
static ssize_t ati_remote2_store_channel_mask(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct usb_device *udev = to_usb_device(dev);
struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
struct ati_remote2 *ar2 = usb_get_intfdata(intf);
unsigned long mask;
int r;
if (strict_strtoul(buf, 0, &mask))
return -EINVAL;
if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
return -EINVAL;
r = usb_autopm_get_interface(ar2->intf[0]);
if (r) {
dev_err(&ar2->intf[0]->dev,
"%s(): usb_autopm_get_interface() = %d\n", __func__, r);
return r;
}
mutex_lock(&ati_remote2_mutex);
if (mask != ar2->channel_mask && !ati_remote2_setup(ar2, mask))
ar2->channel_mask = mask;
mutex_unlock(&ati_remote2_mutex);
usb_autopm_put_interface(ar2->intf[0]);
return count;
}
static ssize_t ati_remote2_show_mode_mask(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct usb_device *udev = to_usb_device(dev);
struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
struct ati_remote2 *ar2 = usb_get_intfdata(intf);
return sprintf(buf, "0x%02x\n", ar2->mode_mask);
}
static ssize_t ati_remote2_store_mode_mask(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct usb_device *udev = to_usb_device(dev);
struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
struct ati_remote2 *ar2 = usb_get_intfdata(intf);
unsigned long mask;
if (strict_strtoul(buf, 0, &mask))
return -EINVAL;
if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
return -EINVAL;
ar2->mode_mask = mask;
return count;
}
static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
ati_remote2_store_channel_mask);
static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
ati_remote2_store_mode_mask);
static struct attribute *ati_remote2_attrs[] = {
&dev_attr_channel_mask.attr,
&dev_attr_mode_mask.attr,
NULL,
};
static struct attribute_group ati_remote2_attr_group = {
.attrs = ati_remote2_attrs,
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct usb_host_interface *alt = interface->cur_altsetting;
struct ati_remote2 *ar2;
int r;
if (alt->desc.bInterfaceNumber)
return -ENODEV;
ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
if (!ar2)
return -ENOMEM;
ar2->udev = udev;
ar2->intf[0] = interface;
ar2->ep[0] = &alt->endpoint[0].desc;
ar2->intf[1] = usb_ifnum_to_if(udev, 1);
r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
if (r)
goto fail1;
alt = ar2->intf[1]->cur_altsetting;
ar2->ep[1] = &alt->endpoint[0].desc;
r = ati_remote2_urb_init(ar2);
if (r)
goto fail2;
ar2->channel_mask = channel_mask;
ar2->mode_mask = mode_mask;
r = ati_remote2_setup(ar2, ar2->channel_mask);
if (r)
goto fail2;
usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
if (r)
goto fail2;
r = ati_remote2_input_init(ar2);
if (r)
goto fail3;
usb_set_intfdata(interface, ar2);
interface->needs_remote_wakeup = 1;
return 0;
fail3:
sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
fail2:
ati_remote2_urb_cleanup(ar2);
usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
fail1:
kfree(ar2);
return r;
}
static void ati_remote2_disconnect(struct usb_interface *interface)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
if (alt->desc.bInterfaceNumber)
return;
ar2 = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
input_unregister_device(ar2->idev);
sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
ati_remote2_urb_cleanup(ar2);
usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
kfree(ar2);
}
static int ati_remote2_suspend(struct usb_interface *interface,
pm_message_t message)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
if (alt->desc.bInterfaceNumber)
return 0;
ar2 = usb_get_intfdata(interface);
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
mutex_lock(&ati_remote2_mutex);
if (ar2->flags & ATI_REMOTE2_OPENED)
ati_remote2_kill_urbs(ar2);
ar2->flags |= ATI_REMOTE2_SUSPENDED;
mutex_unlock(&ati_remote2_mutex);
return 0;
}
static int ati_remote2_resume(struct usb_interface *interface)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
int r = 0;
if (alt->desc.bInterfaceNumber)
return 0;
ar2 = usb_get_intfdata(interface);
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
mutex_lock(&ati_remote2_mutex);
if (ar2->flags & ATI_REMOTE2_OPENED)
r = ati_remote2_submit_urbs(ar2);
if (!r)
ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
mutex_unlock(&ati_remote2_mutex);
return r;
}
static int ati_remote2_reset_resume(struct usb_interface *interface)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
int r = 0;
if (alt->desc.bInterfaceNumber)
return 0;
ar2 = usb_get_intfdata(interface);
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
mutex_lock(&ati_remote2_mutex);
r = ati_remote2_setup(ar2, ar2->channel_mask);
if (r)
goto out;
if (ar2->flags & ATI_REMOTE2_OPENED)
r = ati_remote2_submit_urbs(ar2);
if (!r)
ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
out:
mutex_unlock(&ati_remote2_mutex);
return r;
}
static int ati_remote2_pre_reset(struct usb_interface *interface)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
if (alt->desc.bInterfaceNumber)
return 0;
ar2 = usb_get_intfdata(interface);
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
mutex_lock(&ati_remote2_mutex);
if (ar2->flags == ATI_REMOTE2_OPENED)
ati_remote2_kill_urbs(ar2);
return 0;
}
static int ati_remote2_post_reset(struct usb_interface *interface)
{
struct ati_remote2 *ar2;
struct usb_host_interface *alt = interface->cur_altsetting;
int r = 0;
if (alt->desc.bInterfaceNumber)
return 0;
ar2 = usb_get_intfdata(interface);
dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
if (ar2->flags == ATI_REMOTE2_OPENED)
r = ati_remote2_submit_urbs(ar2);
mutex_unlock(&ati_remote2_mutex);
return r;
}
static int __init ati_remote2_init(void)
{
int r;
r = usb_register(&ati_remote2_driver);
if (r)
printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
else
printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
return r;
}
static void __exit ati_remote2_exit(void)
{
usb_deregister(&ati_remote2_driver);
}
module_init(ati_remote2_init);
module_exit(ati_remote2_exit);