mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
f75a8ff67d
Now that a regulator device for controlling the codec chip reset state over a platform agnostic regulator API is available on the only board using this driver so far, extend the driver with a bias control function which will request virtual power to the codec chip from that virtual regulator, and will supersede the present implementation existing at the sound card level. Thanks to the regulator sharing mechanism, both the old (the sound card) and the new (the codec) implementations should coexist smoothly until the sound card file is updated. For this to work as expected, update the sound card .set_bias_level callback to not touch codec->dapm.bias_level. While extending the cx20442 structure, drop unused control_type member. Created against linxu-3.2-rc6, tested on top of patch 1/4 "ARM: OMAP1: ams-delta: set up a regulator over the modem reset GPIO pin". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
444 lines
10 KiB
C
444 lines
10 KiB
C
/*
|
|
* cx20442.c -- CX20442 ALSA Soc Audio driver
|
|
*
|
|
* Copyright 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
|
|
*
|
|
* Initially based on sound/soc/codecs/wm8400.c
|
|
* Copyright 2008, 2009 Wolfson Microelectronics PLC.
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/tty.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include "cx20442.h"
|
|
|
|
|
|
struct cx20442_priv {
|
|
void *control_data;
|
|
struct regulator *por;
|
|
};
|
|
|
|
#define CX20442_PM 0x0
|
|
|
|
#define CX20442_TELIN 0
|
|
#define CX20442_TELOUT 1
|
|
#define CX20442_MIC 2
|
|
#define CX20442_SPKOUT 3
|
|
#define CX20442_AGC 4
|
|
|
|
static const struct snd_soc_dapm_widget cx20442_dapm_widgets[] = {
|
|
SND_SOC_DAPM_OUTPUT("TELOUT"),
|
|
SND_SOC_DAPM_OUTPUT("SPKOUT"),
|
|
SND_SOC_DAPM_OUTPUT("AGCOUT"),
|
|
|
|
SND_SOC_DAPM_MIXER("SPKOUT Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA("TELOUT Amp", CX20442_PM, CX20442_TELOUT, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("SPKOUT Amp", CX20442_PM, CX20442_SPKOUT, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("SPKOUT AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MICBIAS("TELIN Bias", CX20442_PM, CX20442_TELIN, 0),
|
|
SND_SOC_DAPM_MICBIAS("MIC Bias", CX20442_PM, CX20442_MIC, 0),
|
|
|
|
SND_SOC_DAPM_PGA("MIC AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_INPUT("TELIN"),
|
|
SND_SOC_DAPM_INPUT("MIC"),
|
|
SND_SOC_DAPM_INPUT("AGCIN"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route cx20442_audio_map[] = {
|
|
{"TELOUT", NULL, "TELOUT Amp"},
|
|
|
|
{"SPKOUT", NULL, "SPKOUT Mixer"},
|
|
{"SPKOUT Mixer", NULL, "SPKOUT Amp"},
|
|
|
|
{"TELOUT Amp", NULL, "DAC"},
|
|
{"SPKOUT Amp", NULL, "DAC"},
|
|
|
|
{"SPKOUT Mixer", NULL, "SPKOUT AGC"},
|
|
{"SPKOUT AGC", NULL, "AGCIN"},
|
|
|
|
{"AGCOUT", NULL, "MIC AGC"},
|
|
{"MIC AGC", NULL, "MIC"},
|
|
|
|
{"MIC Bias", NULL, "MIC"},
|
|
{"Input Mixer", NULL, "MIC Bias"},
|
|
|
|
{"TELIN Bias", NULL, "TELIN"},
|
|
{"Input Mixer", NULL, "TELIN Bias"},
|
|
|
|
{"ADC", NULL, "Input Mixer"},
|
|
};
|
|
|
|
static unsigned int cx20442_read_reg_cache(struct snd_soc_codec *codec,
|
|
unsigned int reg)
|
|
{
|
|
u8 *reg_cache = codec->reg_cache;
|
|
|
|
if (reg >= codec->driver->reg_cache_size)
|
|
return -EINVAL;
|
|
|
|
return reg_cache[reg];
|
|
}
|
|
|
|
enum v253_vls {
|
|
V253_VLS_NONE = 0,
|
|
V253_VLS_T,
|
|
V253_VLS_L,
|
|
V253_VLS_LT,
|
|
V253_VLS_S,
|
|
V253_VLS_ST,
|
|
V253_VLS_M,
|
|
V253_VLS_MST,
|
|
V253_VLS_S1,
|
|
V253_VLS_S1T,
|
|
V253_VLS_MS1T,
|
|
V253_VLS_M1,
|
|
V253_VLS_M1ST,
|
|
V253_VLS_M1S1T,
|
|
V253_VLS_H,
|
|
V253_VLS_HT,
|
|
V253_VLS_MS,
|
|
V253_VLS_MS1,
|
|
V253_VLS_M1S,
|
|
V253_VLS_M1S1,
|
|
V253_VLS_TEST,
|
|
};
|
|
|
|
static int cx20442_pm_to_v253_vls(u8 value)
|
|
{
|
|
switch (value & ~(1 << CX20442_AGC)) {
|
|
case 0:
|
|
return V253_VLS_T;
|
|
case (1 << CX20442_SPKOUT):
|
|
case (1 << CX20442_MIC):
|
|
case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC):
|
|
return V253_VLS_M1S1;
|
|
case (1 << CX20442_TELOUT):
|
|
case (1 << CX20442_TELIN):
|
|
case (1 << CX20442_TELOUT) | (1 << CX20442_TELIN):
|
|
return V253_VLS_L;
|
|
case (1 << CX20442_TELOUT) | (1 << CX20442_MIC):
|
|
return V253_VLS_NONE;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
static int cx20442_pm_to_v253_vsp(u8 value)
|
|
{
|
|
switch (value & ~(1 << CX20442_AGC)) {
|
|
case (1 << CX20442_SPKOUT):
|
|
case (1 << CX20442_MIC):
|
|
case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC):
|
|
return (bool)(value & (1 << CX20442_AGC));
|
|
}
|
|
return (value & (1 << CX20442_AGC)) ? -EINVAL : 0;
|
|
}
|
|
|
|
static int cx20442_write(struct snd_soc_codec *codec, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
struct cx20442_priv *cx20442 = snd_soc_codec_get_drvdata(codec);
|
|
u8 *reg_cache = codec->reg_cache;
|
|
int vls, vsp, old, len;
|
|
char buf[18];
|
|
|
|
if (reg >= codec->driver->reg_cache_size)
|
|
return -EINVAL;
|
|
|
|
/* hw_write and control_data pointers required for talking to the modem
|
|
* are expected to be set by the line discipline initialization code */
|
|
if (!codec->hw_write || !cx20442->control_data)
|
|
return -EIO;
|
|
|
|
old = reg_cache[reg];
|
|
reg_cache[reg] = value;
|
|
|
|
vls = cx20442_pm_to_v253_vls(value);
|
|
if (vls < 0)
|
|
return vls;
|
|
|
|
vsp = cx20442_pm_to_v253_vsp(value);
|
|
if (vsp < 0)
|
|
return vsp;
|
|
|
|
if ((vls == V253_VLS_T) ||
|
|
(vls == cx20442_pm_to_v253_vls(old))) {
|
|
if (vsp == cx20442_pm_to_v253_vsp(old))
|
|
return 0;
|
|
len = snprintf(buf, ARRAY_SIZE(buf), "at+vsp=%d\r", vsp);
|
|
} else if (vsp == cx20442_pm_to_v253_vsp(old))
|
|
len = snprintf(buf, ARRAY_SIZE(buf), "at+vls=%d\r", vls);
|
|
else
|
|
len = snprintf(buf, ARRAY_SIZE(buf),
|
|
"at+vls=%d;+vsp=%d\r", vls, vsp);
|
|
|
|
if (unlikely(len > (ARRAY_SIZE(buf) - 1)))
|
|
return -ENOMEM;
|
|
|
|
dev_dbg(codec->dev, "%s: %s\n", __func__, buf);
|
|
if (codec->hw_write(cx20442->control_data, buf, len) != len)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Line discpline related code
|
|
*
|
|
* Any of the callback functions below can be used in two ways:
|
|
* 1) registerd by a machine driver as one of line discipline operations,
|
|
* 2) called from a machine's provided line discipline callback function
|
|
* in case when extra machine specific code must be run as well.
|
|
*/
|
|
|
|
/* Modem init: echo off, digital speaker off, quiet off, voice mode */
|
|
static const char *v253_init = "ate0m0q0+fclass=8\r";
|
|
|
|
/* Line discipline .open() */
|
|
static int v253_open(struct tty_struct *tty)
|
|
{
|
|
int ret, len = strlen(v253_init);
|
|
|
|
/* Doesn't make sense without write callback */
|
|
if (!tty->ops->write)
|
|
return -EINVAL;
|
|
|
|
/* Won't work if no codec pointer has been passed by a card driver */
|
|
if (!tty->disc_data)
|
|
return -ENODEV;
|
|
|
|
if (tty->ops->write(tty, v253_init, len) != len) {
|
|
ret = -EIO;
|
|
goto err;
|
|
}
|
|
/* Actual setup will be performed after the modem responds. */
|
|
return 0;
|
|
err:
|
|
tty->disc_data = NULL;
|
|
return ret;
|
|
}
|
|
|
|
/* Line discipline .close() */
|
|
static void v253_close(struct tty_struct *tty)
|
|
{
|
|
struct snd_soc_codec *codec = tty->disc_data;
|
|
struct cx20442_priv *cx20442;
|
|
|
|
tty->disc_data = NULL;
|
|
|
|
if (!codec)
|
|
return;
|
|
|
|
cx20442 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
/* Prevent the codec driver from further accessing the modem */
|
|
codec->hw_write = NULL;
|
|
cx20442->control_data = NULL;
|
|
codec->card->pop_time = 0;
|
|
}
|
|
|
|
/* Line discipline .hangup() */
|
|
static int v253_hangup(struct tty_struct *tty)
|
|
{
|
|
v253_close(tty);
|
|
return 0;
|
|
}
|
|
|
|
/* Line discipline .receive_buf() */
|
|
static void v253_receive(struct tty_struct *tty,
|
|
const unsigned char *cp, char *fp, int count)
|
|
{
|
|
struct snd_soc_codec *codec = tty->disc_data;
|
|
struct cx20442_priv *cx20442;
|
|
|
|
if (!codec)
|
|
return;
|
|
|
|
cx20442 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
if (!cx20442->control_data) {
|
|
/* First modem response, complete setup procedure */
|
|
|
|
/* Set up codec driver access to modem controls */
|
|
cx20442->control_data = tty;
|
|
codec->hw_write = (hw_write_t)tty->ops->write;
|
|
codec->card->pop_time = 1;
|
|
}
|
|
}
|
|
|
|
/* Line discipline .write_wakeup() */
|
|
static void v253_wakeup(struct tty_struct *tty)
|
|
{
|
|
}
|
|
|
|
struct tty_ldisc_ops v253_ops = {
|
|
.magic = TTY_LDISC_MAGIC,
|
|
.name = "cx20442",
|
|
.owner = THIS_MODULE,
|
|
.open = v253_open,
|
|
.close = v253_close,
|
|
.hangup = v253_hangup,
|
|
.receive_buf = v253_receive,
|
|
.write_wakeup = v253_wakeup,
|
|
};
|
|
EXPORT_SYMBOL_GPL(v253_ops);
|
|
|
|
|
|
/*
|
|
* Codec DAI
|
|
*/
|
|
|
|
static struct snd_soc_dai_driver cx20442_dai = {
|
|
.name = "cx20442-voice",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = SNDRV_PCM_RATE_8000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = SNDRV_PCM_RATE_8000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
};
|
|
|
|
static int cx20442_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct cx20442_priv *cx20442 = snd_soc_codec_get_drvdata(codec);
|
|
int err = 0;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_PREPARE:
|
|
if (codec->dapm.bias_level != SND_SOC_BIAS_STANDBY)
|
|
break;
|
|
if (IS_ERR(cx20442->por))
|
|
err = PTR_ERR(cx20442->por);
|
|
else
|
|
err = regulator_enable(cx20442->por);
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level != SND_SOC_BIAS_PREPARE)
|
|
break;
|
|
if (IS_ERR(cx20442->por))
|
|
err = PTR_ERR(cx20442->por);
|
|
else
|
|
err = regulator_disable(cx20442->por);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (!err)
|
|
codec->dapm.bias_level = level;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int cx20442_codec_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct cx20442_priv *cx20442;
|
|
|
|
cx20442 = kzalloc(sizeof(struct cx20442_priv), GFP_KERNEL);
|
|
if (cx20442 == NULL)
|
|
return -ENOMEM;
|
|
|
|
cx20442->por = regulator_get(codec->dev, "POR");
|
|
if (IS_ERR(cx20442->por))
|
|
dev_warn(codec->dev, "failed to get the regulator");
|
|
cx20442->control_data = NULL;
|
|
|
|
snd_soc_codec_set_drvdata(codec, cx20442);
|
|
codec->hw_write = NULL;
|
|
codec->card->pop_time = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* power down chip */
|
|
static int cx20442_codec_remove(struct snd_soc_codec *codec)
|
|
{
|
|
struct cx20442_priv *cx20442 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
if (cx20442->control_data) {
|
|
struct tty_struct *tty = cx20442->control_data;
|
|
tty_hangup(tty);
|
|
}
|
|
|
|
if (!IS_ERR(cx20442->por)) {
|
|
/* should be already in STANDBY, hence disabled */
|
|
regulator_put(cx20442->por);
|
|
}
|
|
|
|
snd_soc_codec_set_drvdata(codec, NULL);
|
|
kfree(cx20442);
|
|
return 0;
|
|
}
|
|
|
|
static const u8 cx20442_reg;
|
|
|
|
static struct snd_soc_codec_driver cx20442_codec_dev = {
|
|
.probe = cx20442_codec_probe,
|
|
.remove = cx20442_codec_remove,
|
|
.set_bias_level = cx20442_set_bias_level,
|
|
.reg_cache_default = &cx20442_reg,
|
|
.reg_cache_size = 1,
|
|
.reg_word_size = sizeof(u8),
|
|
.read = cx20442_read_reg_cache,
|
|
.write = cx20442_write,
|
|
.dapm_widgets = cx20442_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(cx20442_dapm_widgets),
|
|
.dapm_routes = cx20442_audio_map,
|
|
.num_dapm_routes = ARRAY_SIZE(cx20442_audio_map),
|
|
};
|
|
|
|
static int cx20442_platform_probe(struct platform_device *pdev)
|
|
{
|
|
return snd_soc_register_codec(&pdev->dev,
|
|
&cx20442_codec_dev, &cx20442_dai, 1);
|
|
}
|
|
|
|
static int __exit cx20442_platform_remove(struct platform_device *pdev)
|
|
{
|
|
snd_soc_unregister_codec(&pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver cx20442_platform_driver = {
|
|
.driver = {
|
|
.name = "cx20442-codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = cx20442_platform_probe,
|
|
.remove = __exit_p(cx20442_platform_remove),
|
|
};
|
|
|
|
module_platform_driver(cx20442_platform_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC CX20442-11 voice modem codec driver");
|
|
MODULE_AUTHOR("Janusz Krzysztofik");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:cx20442-codec");
|