mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:49:08 +07:00
235eb70034
The patch adds the descriptions for the DMIC clock rate and delay settings. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200323082547.7898-3-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
75 lines
1.8 KiB
Plaintext
75 lines
1.8 KiB
Plaintext
RT5682 audio CODEC
|
|
|
|
This device supports I2C only.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "realtek,rt5682" or "realtek,rt5682i"
|
|
|
|
- reg : The I2C address of the device.
|
|
|
|
Optional properties:
|
|
|
|
- interrupts : The CODEC's interrupt output.
|
|
|
|
- realtek,dmic1-data-pin
|
|
0: dmic1 is not used
|
|
1: using GPIO2 pin as dmic1 data pin
|
|
2: using GPIO5 pin as dmic1 data pin
|
|
|
|
- realtek,dmic1-clk-pin
|
|
0: using GPIO1 pin as dmic1 clock pin
|
|
1: using GPIO3 pin as dmic1 clock pin
|
|
|
|
- realtek,jd-src
|
|
0: No JD is used
|
|
1: using JD1 as JD source
|
|
|
|
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
|
|
|
|
- realtek,btndet-delay
|
|
The debounce delay for push button.
|
|
The delay time is realtek,btndet-delay value multiple of 8.192 ms.
|
|
If absent, the default is 16.
|
|
|
|
- #clock-cells : Should be set to '<1>', wclk and bclk sources provided.
|
|
- clock-output-names : Name given for DAI clocks output.
|
|
|
|
- clocks : phandle and clock specifier for codec MCLK.
|
|
- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
|
|
|
|
- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
|
|
the particular DMIC.
|
|
|
|
- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
|
|
the particular DMIC.
|
|
|
|
Pins on the device (for linking into audio routes) for RT5682:
|
|
|
|
* DMIC L1
|
|
* DMIC R1
|
|
* IN1P
|
|
* HPOL
|
|
* HPOR
|
|
|
|
Example:
|
|
|
|
rt5682 {
|
|
compatible = "realtek,rt5682i";
|
|
reg = <0x1a>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
|
|
realtek,ldo1-en-gpios =
|
|
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
|
|
realtek,dmic1-data-pin = <1>;
|
|
realtek,dmic1-clk-pin = <1>;
|
|
realtek,jd-src = <1>;
|
|
realtek,btndet-delay = <16>;
|
|
|
|
#clock-cells = <1>;
|
|
clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
|
|
|
|
clocks = <&osc>;
|
|
clock-names = "mclk";
|
|
};
|