Olof Johansson 1c50084093 iio: accel: bmc150: reset chip at init time ... In at least one known setup, the chip comes up in a state where reading the chip ID returns garbage unless it's been reset, due to noise on the wires during system boot. All supported chips have the same reset method, and based on the datasheets they all need 1.3 or 1.8ms to recover after reset. So, do the conservative thing here and always reset the chip. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-09-03 17:26:14 +01:00
..
accel	iio: accel: bmc150: reset chip at init time	2016-09-03 17:26:14 +01:00
adc	iio: adc: rockchip_saradc: reset saradc controller before programming it	2016-08-23 19:05:03 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: buffer-dma: Use ARRAY_SIZE in for loop range	2016-06-27 21:06:40 +01:00
chemical	iio: chemical: atlas-ph-sensor: fix typo in val assignment	2016-08-21 16:23:27 +01:00
common	iio: fix pressure data output unit in hid-sensor-attributes	2016-09-03 17:09:58 +01:00
dac	iio: stx104: Unregister IIO device on remove callback	2016-08-15 15:39:32 +01:00
dummy	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: bmg160: add callbacks for the filter frequency	2016-07-03 12:39:55 +01:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: humidity: hdc100x: fix sensor data reads of temp and humidity	2016-08-15 17:01:53 +01:00
imu	Third set of IIO new device support, features and cleanups for the 4.8 cycle.	2016-07-14 12:05:29 +09:00
light	iio: add Kconfig selects needed for triggered buffer compiles	2016-08-15 15:42:04 +01:00
magnetometer	iio: magn: ak8975: deploy runtime and system PM	2016-06-30 20:40:16 +01:00
orientation	iio: orientation: hid-sensor-rotation: Fix memory leak in probe()	2015-05-17 09:10:25 +01:00
potentiometer	iio: potentiometer: Fix typo in Kconfig	2016-07-03 12:40:01 +01:00
pressure	iio: pressure: bmp280: fix runtime suspend/resume crash	2016-08-15 15:46:06 +01:00
proximity	iio: proximity: as3935: set up buffer timestamps for non-zero values	2016-08-15 15:39:27 +01:00
temperature	iio: Export I2C module alias information	2016-05-21 20:08:14 +01:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"	2016-08-21 16:22:44 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-event.c	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: core: Add devm_ APIs for iio_channel_{get,release}_all	2016-04-19 19:58:15 +01:00
Kconfig	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
Makefile	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00