linux_dsm_epyc7002/include/linux/ceph/rados.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

506 lines
17 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef CEPH_RADOS_H
#define CEPH_RADOS_H
/*
* Data types for the Ceph distributed object storage layer RADOS
* (Reliable Autonomic Distributed Object Store).
*/
#include <linux/ceph/msgr.h>
/*
* fs id
*/
struct ceph_fsid {
unsigned char fsid[16];
};
static inline int ceph_fsid_compare(const struct ceph_fsid *a,
const struct ceph_fsid *b)
{
return memcmp(a, b, sizeof(*a));
}
/*
* ino, object, etc.
*/
typedef __le64 ceph_snapid_t;
#define CEPH_SNAPDIR ((__u64)(-1)) /* reserved for hidden .snap dir */
#define CEPH_NOSNAP ((__u64)(-2)) /* "head", "live" revision */
#define CEPH_MAXSNAP ((__u64)(-3)) /* largest valid snapid */
struct ceph_timespec {
__le32 tv_sec;
__le32 tv_nsec;
} __attribute__ ((packed));
/*
* object layout - how objects are mapped into PGs
*/
#define CEPH_OBJECT_LAYOUT_HASH 1
#define CEPH_OBJECT_LAYOUT_LINEAR 2
#define CEPH_OBJECT_LAYOUT_HASHINO 3
/*
* pg layout -- how PGs are mapped onto (sets of) OSDs
*/
#define CEPH_PG_LAYOUT_CRUSH 0
#define CEPH_PG_LAYOUT_HASH 1
#define CEPH_PG_LAYOUT_LINEAR 2
#define CEPH_PG_LAYOUT_HYBRID 3
#define CEPH_PG_MAX_SIZE 32 /* max # osds in a single pg */
/*
* placement group.
* we encode this into one __le64.
*/
struct ceph_pg_v1 {
__le16 preferred; /* preferred primary osd */
__le16 ps; /* placement seed */
__le32 pool; /* object pool */
} __attribute__ ((packed));
/*
* pg_pool is a set of pgs storing a pool of objects
*
* pg_num -- base number of pseudorandomly placed pgs
*
* pgp_num -- effective number when calculating pg placement. this
* is used for pg_num increases. new pgs result in data being "split"
* into new pgs. for this to proceed smoothly, new pgs are intiially
* colocated with their parents; that is, pgp_num doesn't increase
* until the new pgs have successfully split. only _then_ are the new
* pgs placed independently.
*
* lpg_num -- localized pg count (per device). replicas are randomly
* selected.
*
* lpgp_num -- as above.
*/
#define CEPH_NOPOOL ((__u64) (-1)) /* pool id not defined */
#define CEPH_POOL_TYPE_REP 1
#define CEPH_POOL_TYPE_RAID4 2 /* never implemented */
#define CEPH_POOL_TYPE_EC 3
/*
* stable_mod func is used to control number of placement groups.
* similar to straight-up modulo, but produces a stable mapping as b
* increases over time. b is the number of bins, and bmask is the
* containing power of 2 minus 1.
*
* b <= bmask and bmask=(2**n)-1
* e.g., b=12 -> bmask=15, b=123 -> bmask=127
*/
static inline int ceph_stable_mod(int x, int b, int bmask)
{
if ((x & bmask) < b)
return x & bmask;
else
return x & (bmask >> 1);
}
/*
* object layout - how a given object should be stored.
*/
struct ceph_object_layout {
struct ceph_pg_v1 ol_pgid; /* raw pg, with _full_ ps precision. */
__le32 ol_stripe_unit; /* for per-object parity, if any */
} __attribute__ ((packed));
/*
* compound epoch+version, used by storage layer to serialize mutations
*/
struct ceph_eversion {
__le64 version;
__le32 epoch;
} __attribute__ ((packed));
/*
* osd map bits
*/
/* status bits */
#define CEPH_OSD_EXISTS (1<<0)
#define CEPH_OSD_UP (1<<1)
#define CEPH_OSD_AUTOOUT (1<<2) /* osd was automatically marked out */
#define CEPH_OSD_NEW (1<<3) /* osd is new, never marked in */
extern const char *ceph_osd_state_name(int s);
/* osd weights. fixed point value: 0x10000 == 1.0 ("in"), 0 == "out" */
#define CEPH_OSD_IN 0x10000
#define CEPH_OSD_OUT 0
/* osd primary-affinity. fixed point value: 0x10000 == baseline */
#define CEPH_OSD_MAX_PRIMARY_AFFINITY 0x10000
#define CEPH_OSD_DEFAULT_PRIMARY_AFFINITY 0x10000
/*
* osd map flag bits
*/
#define CEPH_OSDMAP_NEARFULL (1<<0) /* sync writes (near ENOSPC) */
#define CEPH_OSDMAP_FULL (1<<1) /* no data writes (ENOSPC) */
#define CEPH_OSDMAP_PAUSERD (1<<2) /* pause all reads */
#define CEPH_OSDMAP_PAUSEWR (1<<3) /* pause all writes */
#define CEPH_OSDMAP_PAUSEREC (1<<4) /* pause recovery */
#define CEPH_OSDMAP_NOUP (1<<5) /* block osd boot */
#define CEPH_OSDMAP_NODOWN (1<<6) /* block osd mark-down/failure */
#define CEPH_OSDMAP_NOOUT (1<<7) /* block osd auto mark-out */
#define CEPH_OSDMAP_NOIN (1<<8) /* block osd auto mark-in */
#define CEPH_OSDMAP_NOBACKFILL (1<<9) /* block osd backfill */
#define CEPH_OSDMAP_NORECOVER (1<<10) /* block osd recovery and backfill */
#define CEPH_OSDMAP_NOSCRUB (1<<11) /* block periodic scrub */
#define CEPH_OSDMAP_NODEEP_SCRUB (1<<12) /* block periodic deep-scrub */
#define CEPH_OSDMAP_NOTIERAGENT (1<<13) /* disable tiering agent */
#define CEPH_OSDMAP_NOREBALANCE (1<<14) /* block osd backfill unless pg is degraded */
#define CEPH_OSDMAP_SORTBITWISE (1<<15) /* use bitwise hobject_t sort */
#define CEPH_OSDMAP_REQUIRE_JEWEL (1<<16) /* require jewel for booting osds */
#define CEPH_OSDMAP_REQUIRE_KRAKEN (1<<17) /* require kraken for booting osds */
#define CEPH_OSDMAP_REQUIRE_LUMINOUS (1<<18) /* require l for booting osds */
#define CEPH_OSDMAP_RECOVERY_DELETES (1<<19) /* deletes performed during recovery instead of peering */
/*
* The error code to return when an OSD can't handle a write
* because it is too large.
*/
#define OSD_WRITETOOBIG EMSGSIZE
/*
* osd ops
*
* WARNING: do not use these op codes directly. Use the helpers
* defined below instead. In certain cases, op code behavior was
* redefined, resulting in special-cases in the helpers.
*/
#define CEPH_OSD_OP_MODE 0xf000
#define CEPH_OSD_OP_MODE_RD 0x1000
#define CEPH_OSD_OP_MODE_WR 0x2000
#define CEPH_OSD_OP_MODE_RMW 0x3000
#define CEPH_OSD_OP_MODE_SUB 0x4000
#define CEPH_OSD_OP_MODE_CACHE 0x8000
#define CEPH_OSD_OP_TYPE 0x0f00
#define CEPH_OSD_OP_TYPE_LOCK 0x0100
#define CEPH_OSD_OP_TYPE_DATA 0x0200
#define CEPH_OSD_OP_TYPE_ATTR 0x0300
#define CEPH_OSD_OP_TYPE_EXEC 0x0400
#define CEPH_OSD_OP_TYPE_PG 0x0500
#define CEPH_OSD_OP_TYPE_MULTI 0x0600 /* multiobject */
#define __CEPH_OSD_OP1(mode, nr) \
(CEPH_OSD_OP_MODE_##mode | (nr))
#define __CEPH_OSD_OP(mode, type, nr) \
(CEPH_OSD_OP_MODE_##mode | CEPH_OSD_OP_TYPE_##type | (nr))
#define __CEPH_FORALL_OSD_OPS(f) \
/** data **/ \
/* read */ \
f(READ, __CEPH_OSD_OP(RD, DATA, 1), "read") \
f(STAT, __CEPH_OSD_OP(RD, DATA, 2), "stat") \
f(MAPEXT, __CEPH_OSD_OP(RD, DATA, 3), "mapext") \
\
/* fancy read */ \
f(MASKTRUNC, __CEPH_OSD_OP(RD, DATA, 4), "masktrunc") \
f(SPARSE_READ, __CEPH_OSD_OP(RD, DATA, 5), "sparse-read") \
\
f(NOTIFY, __CEPH_OSD_OP(RD, DATA, 6), "notify") \
f(NOTIFY_ACK, __CEPH_OSD_OP(RD, DATA, 7), "notify-ack") \
\
/* versioning */ \
f(ASSERT_VER, __CEPH_OSD_OP(RD, DATA, 8), "assert-version") \
\
f(LIST_WATCHERS, __CEPH_OSD_OP(RD, DATA, 9), "list-watchers") \
\
f(LIST_SNAPS, __CEPH_OSD_OP(RD, DATA, 10), "list-snaps") \
\
/* sync */ \
f(SYNC_READ, __CEPH_OSD_OP(RD, DATA, 11), "sync_read") \
\
/* write */ \
f(WRITE, __CEPH_OSD_OP(WR, DATA, 1), "write") \
f(WRITEFULL, __CEPH_OSD_OP(WR, DATA, 2), "writefull") \
f(TRUNCATE, __CEPH_OSD_OP(WR, DATA, 3), "truncate") \
f(ZERO, __CEPH_OSD_OP(WR, DATA, 4), "zero") \
f(DELETE, __CEPH_OSD_OP(WR, DATA, 5), "delete") \
\
/* fancy write */ \
f(APPEND, __CEPH_OSD_OP(WR, DATA, 6), "append") \
f(SETTRUNC, __CEPH_OSD_OP(WR, DATA, 8), "settrunc") \
f(TRIMTRUNC, __CEPH_OSD_OP(WR, DATA, 9), "trimtrunc") \
\
f(TMAPUP, __CEPH_OSD_OP(RMW, DATA, 10), "tmapup") \
f(TMAPPUT, __CEPH_OSD_OP(WR, DATA, 11), "tmapput") \
f(TMAPGET, __CEPH_OSD_OP(RD, DATA, 12), "tmapget") \
\
f(CREATE, __CEPH_OSD_OP(WR, DATA, 13), "create") \
f(ROLLBACK, __CEPH_OSD_OP(WR, DATA, 14), "rollback") \
\
f(WATCH, __CEPH_OSD_OP(WR, DATA, 15), "watch") \
\
/* omap */ \
f(OMAPGETKEYS, __CEPH_OSD_OP(RD, DATA, 17), "omap-get-keys") \
f(OMAPGETVALS, __CEPH_OSD_OP(RD, DATA, 18), "omap-get-vals") \
f(OMAPGETHEADER, __CEPH_OSD_OP(RD, DATA, 19), "omap-get-header") \
f(OMAPGETVALSBYKEYS, __CEPH_OSD_OP(RD, DATA, 20), "omap-get-vals-by-keys") \
f(OMAPSETVALS, __CEPH_OSD_OP(WR, DATA, 21), "omap-set-vals") \
f(OMAPSETHEADER, __CEPH_OSD_OP(WR, DATA, 22), "omap-set-header") \
f(OMAPCLEAR, __CEPH_OSD_OP(WR, DATA, 23), "omap-clear") \
f(OMAPRMKEYS, __CEPH_OSD_OP(WR, DATA, 24), "omap-rm-keys") \
f(OMAP_CMP, __CEPH_OSD_OP(RD, DATA, 25), "omap-cmp") \
\
/* tiering */ \
f(COPY_FROM, __CEPH_OSD_OP(WR, DATA, 26), "copy-from") \
f(COPY_GET_CLASSIC, __CEPH_OSD_OP(RD, DATA, 27), "copy-get-classic") \
f(UNDIRTY, __CEPH_OSD_OP(WR, DATA, 28), "undirty") \
f(ISDIRTY, __CEPH_OSD_OP(RD, DATA, 29), "isdirty") \
f(COPY_GET, __CEPH_OSD_OP(RD, DATA, 30), "copy-get") \
f(CACHE_FLUSH, __CEPH_OSD_OP(CACHE, DATA, 31), "cache-flush") \
f(CACHE_EVICT, __CEPH_OSD_OP(CACHE, DATA, 32), "cache-evict") \
f(CACHE_TRY_FLUSH, __CEPH_OSD_OP(CACHE, DATA, 33), "cache-try-flush") \
\
/* convert tmap to omap */ \
f(TMAP2OMAP, __CEPH_OSD_OP(RMW, DATA, 34), "tmap2omap") \
\
/* hints */ \
f(SETALLOCHINT, __CEPH_OSD_OP(WR, DATA, 35), "set-alloc-hint") \
\
/** multi **/ \
f(CLONERANGE, __CEPH_OSD_OP(WR, MULTI, 1), "clonerange") \
f(ASSERT_SRC_VERSION, __CEPH_OSD_OP(RD, MULTI, 2), "assert-src-version") \
f(SRC_CMPXATTR, __CEPH_OSD_OP(RD, MULTI, 3), "src-cmpxattr") \
\
/** attrs **/ \
/* read */ \
f(GETXATTR, __CEPH_OSD_OP(RD, ATTR, 1), "getxattr") \
f(GETXATTRS, __CEPH_OSD_OP(RD, ATTR, 2), "getxattrs") \
f(CMPXATTR, __CEPH_OSD_OP(RD, ATTR, 3), "cmpxattr") \
\
/* write */ \
f(SETXATTR, __CEPH_OSD_OP(WR, ATTR, 1), "setxattr") \
f(SETXATTRS, __CEPH_OSD_OP(WR, ATTR, 2), "setxattrs") \
f(RESETXATTRS, __CEPH_OSD_OP(WR, ATTR, 3), "resetxattrs") \
f(RMXATTR, __CEPH_OSD_OP(WR, ATTR, 4), "rmxattr") \
\
/** subop **/ \
f(PULL, __CEPH_OSD_OP1(SUB, 1), "pull") \
f(PUSH, __CEPH_OSD_OP1(SUB, 2), "push") \
f(BALANCEREADS, __CEPH_OSD_OP1(SUB, 3), "balance-reads") \
f(UNBALANCEREADS, __CEPH_OSD_OP1(SUB, 4), "unbalance-reads") \
f(SCRUB, __CEPH_OSD_OP1(SUB, 5), "scrub") \
f(SCRUB_RESERVE, __CEPH_OSD_OP1(SUB, 6), "scrub-reserve") \
f(SCRUB_UNRESERVE, __CEPH_OSD_OP1(SUB, 7), "scrub-unreserve") \
f(SCRUB_STOP, __CEPH_OSD_OP1(SUB, 8), "scrub-stop") \
f(SCRUB_MAP, __CEPH_OSD_OP1(SUB, 9), "scrub-map") \
\
/** lock **/ \
f(WRLOCK, __CEPH_OSD_OP(WR, LOCK, 1), "wrlock") \
f(WRUNLOCK, __CEPH_OSD_OP(WR, LOCK, 2), "wrunlock") \
f(RDLOCK, __CEPH_OSD_OP(WR, LOCK, 3), "rdlock") \
f(RDUNLOCK, __CEPH_OSD_OP(WR, LOCK, 4), "rdunlock") \
f(UPLOCK, __CEPH_OSD_OP(WR, LOCK, 5), "uplock") \
f(DNLOCK, __CEPH_OSD_OP(WR, LOCK, 6), "dnlock") \
\
/** exec **/ \
/* note: the RD bit here is wrong; see special-case below in helper */ \
f(CALL, __CEPH_OSD_OP(RD, EXEC, 1), "call") \
\
/** pg **/ \
f(PGLS, __CEPH_OSD_OP(RD, PG, 1), "pgls") \
f(PGLS_FILTER, __CEPH_OSD_OP(RD, PG, 2), "pgls-filter") \
f(PG_HITSET_LS, __CEPH_OSD_OP(RD, PG, 3), "pg-hitset-ls") \
f(PG_HITSET_GET, __CEPH_OSD_OP(RD, PG, 4), "pg-hitset-get")
enum {
#define GENERATE_ENUM_ENTRY(op, opcode, str) CEPH_OSD_OP_##op = (opcode),
__CEPH_FORALL_OSD_OPS(GENERATE_ENUM_ENTRY)
#undef GENERATE_ENUM_ENTRY
};
static inline int ceph_osd_op_type_lock(int op)
{
return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_LOCK;
}
static inline int ceph_osd_op_type_data(int op)
{
return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_DATA;
}
static inline int ceph_osd_op_type_attr(int op)
{
return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_ATTR;
}
static inline int ceph_osd_op_type_exec(int op)
{
return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_EXEC;
}
static inline int ceph_osd_op_type_pg(int op)
{
return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_PG;
}
static inline int ceph_osd_op_type_multi(int op)
{
return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_MULTI;
}
static inline int ceph_osd_op_mode_subop(int op)
{
return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_SUB;
}
static inline int ceph_osd_op_mode_read(int op)
{
return (op & CEPH_OSD_OP_MODE_RD) &&
op != CEPH_OSD_OP_CALL;
}
static inline int ceph_osd_op_mode_modify(int op)
{
return op & CEPH_OSD_OP_MODE_WR;
}
/*
* note that the following tmap stuff is also defined in the ceph librados.h
* any modification here needs to be updated there
*/
#define CEPH_OSD_TMAP_HDR 'h'
#define CEPH_OSD_TMAP_SET 's'
#define CEPH_OSD_TMAP_CREATE 'c' /* create key */
#define CEPH_OSD_TMAP_RM 'r'
#define CEPH_OSD_TMAP_RMSLOPPY 'R'
extern const char *ceph_osd_op_name(int op);
/*
* osd op flags
*
* An op may be READ, WRITE, or READ|WRITE.
*/
enum {
CEPH_OSD_FLAG_ACK = 0x0001, /* want (or is) "ack" ack */
CEPH_OSD_FLAG_ONNVRAM = 0x0002, /* want (or is) "onnvram" ack */
CEPH_OSD_FLAG_ONDISK = 0x0004, /* want (or is) "ondisk" ack */
CEPH_OSD_FLAG_RETRY = 0x0008, /* resend attempt */
CEPH_OSD_FLAG_READ = 0x0010, /* op may read */
CEPH_OSD_FLAG_WRITE = 0x0020, /* op may write */
CEPH_OSD_FLAG_ORDERSNAP = 0x0040, /* EOLDSNAP if snapc is out of order */
CEPH_OSD_FLAG_PEERSTAT_OLD = 0x0080, /* DEPRECATED msg includes osd_peer_stat */
CEPH_OSD_FLAG_BALANCE_READS = 0x0100,
CEPH_OSD_FLAG_PARALLELEXEC = 0x0200, /* execute op in parallel */
CEPH_OSD_FLAG_PGOP = 0x0400, /* pg op, no object */
CEPH_OSD_FLAG_EXEC = 0x0800, /* op may exec */
CEPH_OSD_FLAG_EXEC_PUBLIC = 0x1000, /* DEPRECATED op may exec (public) */
CEPH_OSD_FLAG_LOCALIZE_READS = 0x2000, /* read from nearby replica, if any */
CEPH_OSD_FLAG_RWORDERED = 0x4000, /* order wrt concurrent reads */
CEPH_OSD_FLAG_IGNORE_CACHE = 0x8000, /* ignore cache logic */
CEPH_OSD_FLAG_SKIPRWLOCKS = 0x10000, /* skip rw locks */
CEPH_OSD_FLAG_IGNORE_OVERLAY = 0x20000, /* ignore pool overlay */
CEPH_OSD_FLAG_FLUSH = 0x40000, /* this is part of flush */
CEPH_OSD_FLAG_MAP_SNAP_CLONE = 0x80000, /* map snap direct to clone id */
CEPH_OSD_FLAG_ENFORCE_SNAPC = 0x100000, /* use snapc provided even if
pool uses pool snaps */
CEPH_OSD_FLAG_REDIRECTED = 0x200000, /* op has been redirected */
CEPH_OSD_FLAG_KNOWN_REDIR = 0x400000, /* redirect bit is authoritative */
CEPH_OSD_FLAG_FULL_TRY = 0x800000, /* try op despite full flag */
CEPH_OSD_FLAG_FULL_FORCE = 0x1000000, /* force op despite full flag */
};
enum {
CEPH_OSD_OP_FLAG_EXCL = 1, /* EXCL object create */
CEPH_OSD_OP_FLAG_FAILOK = 2, /* continue despite failure */
};
#define EOLDSNAPC ERESTART /* ORDERSNAP flag set; writer has old snapc*/
#define EBLACKLISTED ESHUTDOWN /* blacklisted */
/* xattr comparison */
enum {
CEPH_OSD_CMPXATTR_OP_NOP = 0,
CEPH_OSD_CMPXATTR_OP_EQ = 1,
CEPH_OSD_CMPXATTR_OP_NE = 2,
CEPH_OSD_CMPXATTR_OP_GT = 3,
CEPH_OSD_CMPXATTR_OP_GTE = 4,
CEPH_OSD_CMPXATTR_OP_LT = 5,
CEPH_OSD_CMPXATTR_OP_LTE = 6
};
enum {
CEPH_OSD_CMPXATTR_MODE_STRING = 1,
CEPH_OSD_CMPXATTR_MODE_U64 = 2
};
enum {
CEPH_OSD_WATCH_OP_UNWATCH = 0,
CEPH_OSD_WATCH_OP_LEGACY_WATCH = 1,
/* note: use only ODD ids to prevent pre-giant code from
interpreting the op as UNWATCH */
CEPH_OSD_WATCH_OP_WATCH = 3,
CEPH_OSD_WATCH_OP_RECONNECT = 5,
CEPH_OSD_WATCH_OP_PING = 7,
};
const char *ceph_osd_watch_op_name(int o);
enum {
CEPH_OSD_BACKOFF_OP_BLOCK = 1,
CEPH_OSD_BACKOFF_OP_ACK_BLOCK = 2,
CEPH_OSD_BACKOFF_OP_UNBLOCK = 3,
};
/*
* an individual object operation. each may be accompanied by some data
* payload
*/
struct ceph_osd_op {
__le16 op; /* CEPH_OSD_OP_* */
__le32 flags; /* CEPH_OSD_OP_FLAG_* */
union {
struct {
__le64 offset, length;
__le64 truncate_size;
__le32 truncate_seq;
} __attribute__ ((packed)) extent;
struct {
__le32 name_len;
__le32 value_len;
__u8 cmp_op; /* CEPH_OSD_CMPXATTR_OP_* */
__u8 cmp_mode; /* CEPH_OSD_CMPXATTR_MODE_* */
} __attribute__ ((packed)) xattr;
struct {
__u8 class_len;
__u8 method_len;
__u8 argc;
__le32 indata_len;
} __attribute__ ((packed)) cls;
struct {
__le64 cookie, count;
} __attribute__ ((packed)) pgls;
struct {
__le64 snapid;
} __attribute__ ((packed)) snap;
struct {
__le64 cookie;
__le64 ver; /* no longer used */
__u8 op; /* CEPH_OSD_WATCH_OP_* */
__le32 gen; /* registration generation */
} __attribute__ ((packed)) watch;
struct {
__le64 cookie;
} __attribute__ ((packed)) notify;
struct {
__le64 offset, length;
__le64 src_offset;
} __attribute__ ((packed)) clonerange;
struct {
__le64 expected_object_size;
__le64 expected_write_size;
} __attribute__ ((packed)) alloc_hint;
};
__le32 payload_len;
} __attribute__ ((packed));
#endif