AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-12 14:46:49 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
1be2172e96
linux_dsm_epyc7002/arch/x86/Makefile
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

332 lines
12 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
# Unified Makefile for i386 and x86_64
# select defconfig based on actual architecture
ifeq ($(ARCH),x86)
ifeq ($(shell uname -m),x86_64)
KBUILD_DEFCONFIG := x86_64_defconfig
else
KBUILD_DEFCONFIG := i386_defconfig
endif
else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
# For gcc stack alignment is specified with -mpreferred-stack-boundary,
# clang has the option -mstack-alignment for that purpose.
ifneq ($(call cc-option, -mpreferred-stack-boundary=4),)
cc_stack_align4 := -mpreferred-stack-boundary=2
cc_stack_align8 := -mpreferred-stack-boundary=3
else ifneq ($(call cc-option, -mstack-alignment=16),)
cc_stack_align4 := -mstack-alignment=4
cc_stack_align8 := -mstack-alignment=8
endif
# How to compile the 16-bit code. Note we always compile for -march=i386;
# that way we can complain to the user if the CPU is insufficient.
#
# The -m16 option is supported by GCC >= 4.9 and clang >= 3.5. For
# older versions of GCC, include an *assembly* header to make sure that
# gcc doesn't play any games behind our back.
CODE16GCC_CFLAGS := -m32 -Wa,$(srctree)/arch/x86/boot/code16gcc.h
M16_CFLAGS := $(call cc-option, -m16, $(CODE16GCC_CFLAGS))
REALMODE_CFLAGS := $(M16_CFLAGS) -g -Os -D__KERNEL__ \
-DDISABLE_BRANCH_PROFILING \
-Wall -Wstrict-prototypes -march=i386 -mregparm=3 \
-fno-strict-aliasing -fomit-frame-pointer -fno-pic \
-mno-mmx -mno-sse
REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4))
export REALMODE_CFLAGS
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
export BITS
ifdef CONFIG_X86_NEED_RELOCS
LDFLAGS_vmlinux := --emit-relocs
endif
#
# Prevent GCC from generating any FP code by mistake.
#
# This must happen before we try the -mpreferred-stack-boundary, see:
#
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383
#
KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow
KBUILD_CFLAGS += $(call cc-option,-mno-avx,)
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
CHECKFLAGS += -D__i386__
biarch := $(call cc-option,-m32)
KBUILD_AFLAGS += $(biarch)
KBUILD_CFLAGS += $(biarch)
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
# Align the stack to the register width instead of using the default
# alignment of 16 bytes. This reduces stack usage and the number of
# alignment instructions.
KBUILD_CFLAGS += $(call cc-option,$(cc_stack_align4))
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
$(call cc-option,-fno-unit-at-a-time))
# CPU-specific tuning. Anything which can be shared with UML should go here.
include arch/x86/Makefile_32.cpu
KBUILD_CFLAGS += $(cflags-y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
else
BITS := 64
UTS_MACHINE := x86_64
CHECKFLAGS += -D__x86_64__ -m64
biarch := -m64
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
# Align jump targets to 1 byte, not the default 16 bytes:
KBUILD_CFLAGS += $(call cc-option,-falign-jumps=1)
# Pack loops tightly as well:
KBUILD_CFLAGS += $(call cc-option,-falign-loops=1)
# Don't autogenerate traditional x87 instructions
KBUILD_CFLAGS += $(call cc-option,-mno-80387)
KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
# By default gcc and clang use a stack alignment of 16 bytes for x86.
# However the standard kernel entry on x86-64 leaves the stack on an
# 8-byte boundary. If the compiler isn't informed about the actual
# alignment it will generate extra alignment instructions for the
# default alignment which keep the stack *mis*aligned.
# Furthermore an alignment to the register width reduces stack usage
# and the number of alignment instructions.
KBUILD_CFLAGS += $(call cc-option,$(cc_stack_align8))
# Use -mskip-rax-setup if supported.
KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup)
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mno-red-zone
KBUILD_CFLAGS += -mcmodel=kernel
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
endif
ifdef CONFIG_X86_X32
x32_ld_ok := $(call try-run,\
/bin/echo -e '1: .quad 1b' | \
$(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" - && \
$(OBJCOPY) -O elf32-x86-64 "$$TMP" "$$TMPO" && \
$(LD) -m elf32_x86_64 "$$TMPO" -o "$$TMP",y,n)
ifeq ($(x32_ld_ok),y)
CONFIG_X86_X32_ABI := y
KBUILD_AFLAGS += -DCONFIG_X86_X32_ABI
KBUILD_CFLAGS += -DCONFIG_X86_X32_ABI
else
$(warning CONFIG_X86_X32 enabled but no binutils support)
endif
endif
export CONFIG_X86_X32_ABI
# Don't unroll struct assignments with kmemcheck enabled
ifeq ($(CONFIG_KMEMCHECK),y)
KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
endif
#
# If the function graph tracer is used with mcount instead of fentry,
# '-maccumulate-outgoing-args' is needed to prevent a GCC bug
# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109)
#
ifdef CONFIG_FUNCTION_GRAPH_TRACER
ifndef CONFIG_HAVE_FENTRY
ACCUMULATE_OUTGOING_ARGS := 1
else
ifeq ($(call cc-option-yn, -mfentry), n)
ACCUMULATE_OUTGOING_ARGS := 1
# GCC ignores '-maccumulate-outgoing-args' when used with '-Os'.
# If '-Os' is enabled, disable it and print a warning.
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
undefine CONFIG_CC_OPTIMIZE_FOR_SIZE
$(warning Disabling CONFIG_CC_OPTIMIZE_FOR_SIZE. Your compiler does not have -mfentry so you cannot optimize for size with CONFIG_FUNCTION_GRAPH_TRACER.)
endif
endif
endif
endif
#
# Jump labels need '-maccumulate-outgoing-args' for gcc < 4.5.2 to prevent a
# GCC bug (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226). There's no way
# to test for this bug at compile-time because the test case needs to execute,
# which is a no-go for cross compilers. So check the GCC version instead.
#
ifdef CONFIG_JUMP_LABEL
ifneq ($(ACCUMULATE_OUTGOING_ARGS), 1)
ACCUMULATE_OUTGOING_ARGS = $(call cc-if-fullversion, -lt, 040502, 1)
endif
endif
ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
# This compiler flag is not supported by Clang:
KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
endif
# Stackpointer is addressed different for 32 bit and 64 bit x86
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
# do binutils support CFI?
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
# is .cfi_signal_frame supported too?
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
# does binutils support specific instructions?
asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1)
avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
avx512_instr :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,-DCONFIG_AS_AVX512=1)
sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=1)
sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1)
KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr)
KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr)
LDFLAGS := -m elf_$(UTS_MACHINE)
# Speed up the build
KBUILD_CFLAGS += -pipe
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
KBUILD_CFLAGS += -Wno-sign-compare
#
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
archscripts: scripts_basic
$(Q)$(MAKE) $(build)=arch/x86/tools relocs
###
# Syscall table generation
archheaders:
$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
archprepare:
ifeq ($(CONFIG_KEXEC_FILE),y)
$(Q)$(MAKE) $(build)=arch/x86/purgatory arch/x86/purgatory/kexec-purgatory.c
endif
###
# Kernel objects
head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
head-y += arch/x86/kernel/ebda.o
head-y += arch/x86/kernel/platform-quirks.o
libs-y += arch/x86/lib/
# See arch/x86/Kbuild for content of core part of the kernel
core-y += arch/x86/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
drivers-$(CONFIG_FB) += arch/x86/video/
####
# boot loader support. Several targets are kept for legacy purposes
boot := arch/x86/boot
BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
PHONY += bzImage $(BOOT_TARGETS)
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
bzImage: vmlinux
ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
$(Q)$(MAKE) $(build)=arch/x86/tools posttest
endif
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += install
install:
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=arch/x86/tools
$(Q)$(MAKE) $(clean)=arch/x86/purgatory
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage288 - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)'
echo ' isoimage - Create a boot CD-ROM image (arch/x86/boot/image.iso)'
echo ' bzdisk/fdimage*/isoimage also accept:'
echo ' FDARGS="..." arguments for the booted kernel'
echo ' FDINITRD=file initrd for the booted kernel'
endef
Reference in New Issue View Git Blame Copy Permalink