mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 00:26:41 +07:00
a6c84622b7
ssb supports one extra device on the cardbus. This results in two devices in total, one beeing the host controller itself and the other the external device connected to the hostcontroller over cardbus. This makes the cardbus slot work on the Linksys WRT150N. Reported-by: Aaron Z <aaronz@pls-net.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
727 lines
18 KiB
C
727 lines
18 KiB
C
/*
|
|
* Sonics Silicon Backplane
|
|
* Broadcom PCI-core driver
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, 2007, Michael Buesch <m@bues.ch>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/export.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ssb/ssb_embedded.h>
|
|
|
|
#include "ssb_private.h"
|
|
|
|
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
|
|
static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
|
|
static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
|
|
static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
|
|
u8 address, u16 data);
|
|
|
|
static inline
|
|
u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
|
|
{
|
|
return ssb_read32(pc->dev, offset);
|
|
}
|
|
|
|
static inline
|
|
void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value)
|
|
{
|
|
ssb_write32(pc->dev, offset, value);
|
|
}
|
|
|
|
static inline
|
|
u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
|
|
{
|
|
return ssb_read16(pc->dev, offset);
|
|
}
|
|
|
|
static inline
|
|
void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
|
|
{
|
|
ssb_write16(pc->dev, offset, value);
|
|
}
|
|
|
|
/**************************************************
|
|
* Code for hostmode operation.
|
|
**************************************************/
|
|
|
|
#ifdef CONFIG_SSB_PCICORE_HOSTMODE
|
|
|
|
#include <asm/paccess.h>
|
|
/* Probe a 32bit value on the bus and catch bus exceptions.
|
|
* Returns nonzero on a bus exception.
|
|
* This is MIPS specific */
|
|
#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr)))
|
|
|
|
/* Assume one-hot slot wiring */
|
|
#define SSB_PCI_SLOT_MAX 16
|
|
|
|
/* Global lock is OK, as we won't have more than one extpci anyway. */
|
|
static DEFINE_SPINLOCK(cfgspace_lock);
|
|
/* Core to access the external PCI config space. Can only have one. */
|
|
static struct ssb_pcicore *extpci_core;
|
|
|
|
|
|
static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
|
|
unsigned int bus, unsigned int dev,
|
|
unsigned int func, unsigned int off)
|
|
{
|
|
u32 addr = 0;
|
|
u32 tmp;
|
|
|
|
/* We do only have one cardbus device behind the bridge. */
|
|
if (pc->cardbusmode && (dev > 1))
|
|
goto out;
|
|
|
|
if (bus == 0) {
|
|
/* Type 0 transaction */
|
|
if (unlikely(dev >= SSB_PCI_SLOT_MAX))
|
|
goto out;
|
|
/* Slide the window */
|
|
tmp = SSB_PCICORE_SBTOPCI_CFG0;
|
|
tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK);
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp);
|
|
/* Calculate the address */
|
|
addr = SSB_PCI_CFG;
|
|
addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK);
|
|
addr |= (func << 8);
|
|
addr |= (off & ~3);
|
|
} else {
|
|
/* Type 1 transaction */
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
|
|
SSB_PCICORE_SBTOPCI_CFG1);
|
|
/* Calculate the address */
|
|
addr = SSB_PCI_CFG;
|
|
addr |= (bus << 16);
|
|
addr |= (dev << 11);
|
|
addr |= (func << 8);
|
|
addr |= (off & ~3);
|
|
}
|
|
out:
|
|
return addr;
|
|
}
|
|
|
|
static int ssb_extpci_read_config(struct ssb_pcicore *pc,
|
|
unsigned int bus, unsigned int dev,
|
|
unsigned int func, unsigned int off,
|
|
void *buf, int len)
|
|
{
|
|
int err = -EINVAL;
|
|
u32 addr, val;
|
|
void __iomem *mmio;
|
|
|
|
SSB_WARN_ON(!pc->hostmode);
|
|
if (unlikely(len != 1 && len != 2 && len != 4))
|
|
goto out;
|
|
addr = get_cfgspace_addr(pc, bus, dev, func, off);
|
|
if (unlikely(!addr))
|
|
goto out;
|
|
err = -ENOMEM;
|
|
mmio = ioremap_nocache(addr, len);
|
|
if (!mmio)
|
|
goto out;
|
|
|
|
if (mips_busprobe32(val, mmio)) {
|
|
val = 0xffffffff;
|
|
goto unmap;
|
|
}
|
|
|
|
val = readl(mmio);
|
|
val >>= (8 * (off & 3));
|
|
|
|
switch (len) {
|
|
case 1:
|
|
*((u8 *)buf) = (u8)val;
|
|
break;
|
|
case 2:
|
|
*((u16 *)buf) = (u16)val;
|
|
break;
|
|
case 4:
|
|
*((u32 *)buf) = (u32)val;
|
|
break;
|
|
}
|
|
err = 0;
|
|
unmap:
|
|
iounmap(mmio);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ssb_extpci_write_config(struct ssb_pcicore *pc,
|
|
unsigned int bus, unsigned int dev,
|
|
unsigned int func, unsigned int off,
|
|
const void *buf, int len)
|
|
{
|
|
int err = -EINVAL;
|
|
u32 addr, val = 0;
|
|
void __iomem *mmio;
|
|
|
|
SSB_WARN_ON(!pc->hostmode);
|
|
if (unlikely(len != 1 && len != 2 && len != 4))
|
|
goto out;
|
|
addr = get_cfgspace_addr(pc, bus, dev, func, off);
|
|
if (unlikely(!addr))
|
|
goto out;
|
|
err = -ENOMEM;
|
|
mmio = ioremap_nocache(addr, len);
|
|
if (!mmio)
|
|
goto out;
|
|
|
|
if (mips_busprobe32(val, mmio)) {
|
|
val = 0xffffffff;
|
|
goto unmap;
|
|
}
|
|
|
|
switch (len) {
|
|
case 1:
|
|
val = readl(mmio);
|
|
val &= ~(0xFF << (8 * (off & 3)));
|
|
val |= *((const u8 *)buf) << (8 * (off & 3));
|
|
break;
|
|
case 2:
|
|
val = readl(mmio);
|
|
val &= ~(0xFFFF << (8 * (off & 3)));
|
|
val |= *((const u16 *)buf) << (8 * (off & 3));
|
|
break;
|
|
case 4:
|
|
val = *((const u32 *)buf);
|
|
break;
|
|
}
|
|
writel(val, mmio);
|
|
|
|
err = 0;
|
|
unmap:
|
|
iounmap(mmio);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int reg, int size, u32 *val)
|
|
{
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
spin_lock_irqsave(&cfgspace_lock, flags);
|
|
err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn),
|
|
PCI_FUNC(devfn), reg, val, size);
|
|
spin_unlock_irqrestore(&cfgspace_lock, flags);
|
|
|
|
return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int reg, int size, u32 val)
|
|
{
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
spin_lock_irqsave(&cfgspace_lock, flags);
|
|
err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn),
|
|
PCI_FUNC(devfn), reg, &val, size);
|
|
spin_unlock_irqrestore(&cfgspace_lock, flags);
|
|
|
|
return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops ssb_pcicore_pciops = {
|
|
.read = ssb_pcicore_read_config,
|
|
.write = ssb_pcicore_write_config,
|
|
};
|
|
|
|
static struct resource ssb_pcicore_mem_resource = {
|
|
.name = "SSB PCIcore external memory",
|
|
.start = SSB_PCI_DMA,
|
|
.end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
|
|
};
|
|
|
|
static struct resource ssb_pcicore_io_resource = {
|
|
.name = "SSB PCIcore external I/O",
|
|
.start = 0x100,
|
|
.end = 0x7FF,
|
|
.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED,
|
|
};
|
|
|
|
static struct pci_controller ssb_pcicore_controller = {
|
|
.pci_ops = &ssb_pcicore_pciops,
|
|
.io_resource = &ssb_pcicore_io_resource,
|
|
.mem_resource = &ssb_pcicore_mem_resource,
|
|
};
|
|
|
|
/* This function is called when doing a pci_enable_device().
|
|
* We must first check if the device is a device on the PCI-core bridge. */
|
|
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
|
|
{
|
|
if (d->bus->ops != &ssb_pcicore_pciops) {
|
|
/* This is not a device on the PCI-core bridge. */
|
|
return -ENODEV;
|
|
}
|
|
|
|
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
|
|
pci_name(d));
|
|
|
|
/* Fix up interrupt lines */
|
|
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
|
|
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Early PCI fixup for a device on the PCI-core bridge. */
|
|
static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
|
|
{
|
|
u8 lat;
|
|
|
|
if (dev->bus->ops != &ssb_pcicore_pciops) {
|
|
/* This is not a device on the PCI-core bridge. */
|
|
return;
|
|
}
|
|
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
|
|
return;
|
|
|
|
ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
|
|
|
|
/* Enable PCI bridge bus mastering and memory space */
|
|
pci_set_master(dev);
|
|
if (pcibios_enable_device(dev, ~0) < 0) {
|
|
ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
|
|
return;
|
|
}
|
|
|
|
/* Enable PCI bridge BAR1 prefetch and burst */
|
|
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
|
|
|
|
/* Make sure our latency is high enough to handle the devices behind us */
|
|
lat = 168;
|
|
ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
|
|
pci_name(dev), lat);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
|
|
|
|
/* PCI device IRQ mapping. */
|
|
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
if (dev->bus->ops != &ssb_pcicore_pciops) {
|
|
/* This is not a device on the PCI-core bridge. */
|
|
return -ENODEV;
|
|
}
|
|
return ssb_mips_irq(extpci_core->dev) + 2;
|
|
}
|
|
|
|
static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
|
|
{
|
|
u32 val;
|
|
|
|
if (WARN_ON(extpci_core))
|
|
return;
|
|
extpci_core = pc;
|
|
|
|
ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
|
|
/* Reset devices on the external PCI bus */
|
|
val = SSB_PCICORE_CTL_RST_OE;
|
|
val |= SSB_PCICORE_CTL_CLK_OE;
|
|
pcicore_write32(pc, SSB_PCICORE_CTL, val);
|
|
val |= SSB_PCICORE_CTL_CLK; /* Clock on */
|
|
pcicore_write32(pc, SSB_PCICORE_CTL, val);
|
|
udelay(150); /* Assertion time demanded by the PCI standard */
|
|
val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
|
|
pcicore_write32(pc, SSB_PCICORE_CTL, val);
|
|
val = SSB_PCICORE_ARBCTL_INTERN;
|
|
pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
|
|
udelay(1); /* Assertion time demanded by the PCI standard */
|
|
|
|
if (pc->dev->bus->has_cardbus_slot) {
|
|
ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
|
|
pc->cardbusmode = 1;
|
|
/* GPIO 1 resets the bridge */
|
|
ssb_gpio_out(pc->dev->bus, 1, 1);
|
|
ssb_gpio_outen(pc->dev->bus, 1, 1);
|
|
pcicore_write16(pc, SSB_PCICORE_SPROM(0),
|
|
pcicore_read16(pc, SSB_PCICORE_SPROM(0))
|
|
| 0x0400);
|
|
}
|
|
|
|
/* 64MB I/O window */
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
|
|
SSB_PCICORE_SBTOPCI_IO);
|
|
/* 64MB config space */
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
|
|
SSB_PCICORE_SBTOPCI_CFG0);
|
|
/* 1GB memory window */
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
|
|
SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
|
|
|
|
/* Enable PCI bridge BAR0 prefetch and burst */
|
|
val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
|
|
/* Clear error conditions */
|
|
val = 0;
|
|
ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2);
|
|
|
|
/* Enable PCI interrupts */
|
|
pcicore_write32(pc, SSB_PCICORE_IMASK,
|
|
SSB_PCICORE_IMASK_INTA);
|
|
|
|
/* Ok, ready to run, register it to the system.
|
|
* The following needs change, if we want to port hostmode
|
|
* to non-MIPS platform. */
|
|
ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
|
|
set_io_port_base(ssb_pcicore_controller.io_map_base);
|
|
/* Give some time to the PCI controller to configure itself with the new
|
|
* values. Not waiting at this point causes crashes of the machine. */
|
|
mdelay(10);
|
|
register_pci_controller(&ssb_pcicore_controller);
|
|
}
|
|
|
|
static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
|
|
{
|
|
struct ssb_bus *bus = pc->dev->bus;
|
|
u16 chipid_top;
|
|
u32 tmp;
|
|
|
|
chipid_top = (bus->chip_id & 0xFF00);
|
|
if (chipid_top != 0x4700 &&
|
|
chipid_top != 0x5300)
|
|
return 0;
|
|
|
|
if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
|
|
return 0;
|
|
|
|
/* The 200-pin BCM4712 package does not bond out PCI. Even when
|
|
* PCI is bonded out, some boards may leave the pins floating. */
|
|
if (bus->chip_id == 0x4712) {
|
|
if (bus->chip_package == SSB_CHIPPACK_BCM4712S)
|
|
return 0;
|
|
if (bus->chip_package == SSB_CHIPPACK_BCM4712M)
|
|
return 0;
|
|
}
|
|
if (bus->chip_id == 0x5350)
|
|
return 0;
|
|
|
|
return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE)));
|
|
}
|
|
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
|
|
|
|
/**************************************************
|
|
* Workarounds.
|
|
**************************************************/
|
|
|
|
static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
|
|
{
|
|
u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
|
|
if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
|
|
tmp &= ~0xF000;
|
|
tmp |= (pc->dev->core_index << 12);
|
|
pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
|
|
}
|
|
}
|
|
|
|
static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
|
|
{
|
|
return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
|
|
}
|
|
|
|
static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
|
|
{
|
|
const u8 serdes_pll_device = 0x1D;
|
|
const u8 serdes_rx_device = 0x1F;
|
|
u16 tmp;
|
|
|
|
ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
|
|
ssb_pcicore_polarity_workaround(pc));
|
|
tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
|
|
if (tmp & 0x4000)
|
|
ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
|
|
}
|
|
|
|
static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
|
|
{
|
|
struct ssb_device *pdev = pc->dev;
|
|
struct ssb_bus *bus = pdev->bus;
|
|
u32 tmp;
|
|
|
|
tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
|
|
tmp |= SSB_PCICORE_SBTOPCI_PREF;
|
|
tmp |= SSB_PCICORE_SBTOPCI_BURST;
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
|
|
|
|
if (pdev->id.revision < 5) {
|
|
tmp = ssb_read32(pdev, SSB_IMCFGLO);
|
|
tmp &= ~SSB_IMCFGLO_SERTO;
|
|
tmp |= 2;
|
|
tmp &= ~SSB_IMCFGLO_REQTO;
|
|
tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
|
|
ssb_write32(pdev, SSB_IMCFGLO, tmp);
|
|
ssb_commit_settings(bus);
|
|
} else if (pdev->id.revision >= 11) {
|
|
tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
|
|
tmp |= SSB_PCICORE_SBTOPCI_MRM;
|
|
pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
|
|
}
|
|
}
|
|
|
|
static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
|
|
{
|
|
u32 tmp;
|
|
u8 rev = pc->dev->id.revision;
|
|
|
|
if (rev == 0 || rev == 1) {
|
|
/* TLP Workaround register. */
|
|
tmp = ssb_pcie_read(pc, 0x4);
|
|
tmp |= 0x8;
|
|
ssb_pcie_write(pc, 0x4, tmp);
|
|
}
|
|
if (rev == 1) {
|
|
/* DLLP Link Control register. */
|
|
tmp = ssb_pcie_read(pc, 0x100);
|
|
tmp |= 0x40;
|
|
ssb_pcie_write(pc, 0x100, tmp);
|
|
}
|
|
|
|
if (rev == 0) {
|
|
const u8 serdes_rx_device = 0x1F;
|
|
|
|
ssb_pcie_mdio_write(pc, serdes_rx_device,
|
|
2 /* Timer */, 0x8128);
|
|
ssb_pcie_mdio_write(pc, serdes_rx_device,
|
|
6 /* CDR */, 0x0100);
|
|
ssb_pcie_mdio_write(pc, serdes_rx_device,
|
|
7 /* CDR BW */, 0x1466);
|
|
} else if (rev == 3 || rev == 4 || rev == 5) {
|
|
/* TODO: DLLP Power Management Threshold */
|
|
ssb_pcicore_serdes_workaround(pc);
|
|
/* TODO: ASPM */
|
|
} else if (rev == 7) {
|
|
/* TODO: No PLL down */
|
|
}
|
|
|
|
if (rev >= 6) {
|
|
/* Miscellaneous Configuration Fixup */
|
|
tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
|
|
if (!(tmp & 0x8000))
|
|
pcicore_write16(pc, SSB_PCICORE_SPROM(5),
|
|
tmp | 0x8000);
|
|
}
|
|
}
|
|
|
|
/**************************************************
|
|
* Generic and Clientmode operation code.
|
|
**************************************************/
|
|
|
|
static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
|
|
{
|
|
struct ssb_device *pdev = pc->dev;
|
|
struct ssb_bus *bus = pdev->bus;
|
|
|
|
if (bus->bustype == SSB_BUSTYPE_PCI)
|
|
ssb_pcicore_fix_sprom_core_index(pc);
|
|
|
|
/* Disable PCI interrupts. */
|
|
ssb_write32(pdev, SSB_INTVEC, 0);
|
|
|
|
/* Additional PCIe always once-executed workarounds */
|
|
if (pc->dev->id.coreid == SSB_DEV_PCIE) {
|
|
ssb_pcicore_serdes_workaround(pc);
|
|
/* TODO: ASPM */
|
|
/* TODO: Clock Request Update */
|
|
}
|
|
}
|
|
|
|
void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
|
|
{
|
|
struct ssb_device *dev = pc->dev;
|
|
|
|
if (!dev)
|
|
return;
|
|
if (!ssb_device_is_enabled(dev))
|
|
ssb_device_enable(dev, 0);
|
|
|
|
#ifdef CONFIG_SSB_PCICORE_HOSTMODE
|
|
pc->hostmode = pcicore_is_in_hostmode(pc);
|
|
if (pc->hostmode)
|
|
ssb_pcicore_init_hostmode(pc);
|
|
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
|
|
if (!pc->hostmode)
|
|
ssb_pcicore_init_clientmode(pc);
|
|
}
|
|
|
|
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
|
|
{
|
|
pcicore_write32(pc, 0x130, address);
|
|
return pcicore_read32(pc, 0x134);
|
|
}
|
|
|
|
static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data)
|
|
{
|
|
pcicore_write32(pc, 0x130, address);
|
|
pcicore_write32(pc, 0x134, data);
|
|
}
|
|
|
|
static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
|
|
{
|
|
const u16 mdio_control = 0x128;
|
|
const u16 mdio_data = 0x12C;
|
|
u32 v;
|
|
int i;
|
|
|
|
v = (1 << 30); /* Start of Transaction */
|
|
v |= (1 << 28); /* Write Transaction */
|
|
v |= (1 << 17); /* Turnaround */
|
|
v |= (0x1F << 18);
|
|
v |= (phy << 4);
|
|
pcicore_write32(pc, mdio_data, v);
|
|
|
|
udelay(10);
|
|
for (i = 0; i < 200; i++) {
|
|
v = pcicore_read32(pc, mdio_control);
|
|
if (v & 0x100 /* Trans complete */)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
}
|
|
|
|
static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
|
|
{
|
|
const u16 mdio_control = 0x128;
|
|
const u16 mdio_data = 0x12C;
|
|
int max_retries = 10;
|
|
u16 ret = 0;
|
|
u32 v;
|
|
int i;
|
|
|
|
v = 0x80; /* Enable Preamble Sequence */
|
|
v |= 0x2; /* MDIO Clock Divisor */
|
|
pcicore_write32(pc, mdio_control, v);
|
|
|
|
if (pc->dev->id.revision >= 10) {
|
|
max_retries = 200;
|
|
ssb_pcie_mdio_set_phy(pc, device);
|
|
}
|
|
|
|
v = (1 << 30); /* Start of Transaction */
|
|
v |= (1 << 29); /* Read Transaction */
|
|
v |= (1 << 17); /* Turnaround */
|
|
if (pc->dev->id.revision < 10)
|
|
v |= (u32)device << 22;
|
|
v |= (u32)address << 18;
|
|
pcicore_write32(pc, mdio_data, v);
|
|
/* Wait for the device to complete the transaction */
|
|
udelay(10);
|
|
for (i = 0; i < max_retries; i++) {
|
|
v = pcicore_read32(pc, mdio_control);
|
|
if (v & 0x100 /* Trans complete */) {
|
|
udelay(10);
|
|
ret = pcicore_read32(pc, mdio_data);
|
|
break;
|
|
}
|
|
msleep(1);
|
|
}
|
|
pcicore_write32(pc, mdio_control, 0);
|
|
return ret;
|
|
}
|
|
|
|
static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
|
|
u8 address, u16 data)
|
|
{
|
|
const u16 mdio_control = 0x128;
|
|
const u16 mdio_data = 0x12C;
|
|
int max_retries = 10;
|
|
u32 v;
|
|
int i;
|
|
|
|
v = 0x80; /* Enable Preamble Sequence */
|
|
v |= 0x2; /* MDIO Clock Divisor */
|
|
pcicore_write32(pc, mdio_control, v);
|
|
|
|
if (pc->dev->id.revision >= 10) {
|
|
max_retries = 200;
|
|
ssb_pcie_mdio_set_phy(pc, device);
|
|
}
|
|
|
|
v = (1 << 30); /* Start of Transaction */
|
|
v |= (1 << 28); /* Write Transaction */
|
|
v |= (1 << 17); /* Turnaround */
|
|
if (pc->dev->id.revision < 10)
|
|
v |= (u32)device << 22;
|
|
v |= (u32)address << 18;
|
|
v |= data;
|
|
pcicore_write32(pc, mdio_data, v);
|
|
/* Wait for the device to complete the transaction */
|
|
udelay(10);
|
|
for (i = 0; i < max_retries; i++) {
|
|
v = pcicore_read32(pc, mdio_control);
|
|
if (v & 0x100 /* Trans complete */)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
pcicore_write32(pc, mdio_control, 0);
|
|
}
|
|
|
|
int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
|
|
struct ssb_device *dev)
|
|
{
|
|
struct ssb_device *pdev = pc->dev;
|
|
struct ssb_bus *bus;
|
|
int err = 0;
|
|
u32 tmp;
|
|
|
|
if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
|
|
/* This SSB device is not on a PCI host-bus. So the IRQs are
|
|
* not routed through the PCI core.
|
|
* So we must not enable routing through the PCI core. */
|
|
goto out;
|
|
}
|
|
|
|
if (!pdev)
|
|
goto out;
|
|
bus = pdev->bus;
|
|
|
|
might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
|
|
|
|
/* Enable interrupts for this device. */
|
|
if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
|
|
u32 coremask;
|
|
|
|
/* Calculate the "coremask" for the device. */
|
|
coremask = (1 << dev->core_index);
|
|
|
|
SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
|
|
err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
|
|
if (err)
|
|
goto out;
|
|
tmp |= coremask << 8;
|
|
err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp);
|
|
if (err)
|
|
goto out;
|
|
} else {
|
|
u32 intvec;
|
|
|
|
intvec = ssb_read32(pdev, SSB_INTVEC);
|
|
tmp = ssb_read32(dev, SSB_TPSFLAG);
|
|
tmp &= SSB_TPSFLAG_BPFLAG;
|
|
intvec |= (1 << tmp);
|
|
ssb_write32(pdev, SSB_INTVEC, intvec);
|
|
}
|
|
|
|
/* Setup PCIcore operation. */
|
|
if (pc->setup_done)
|
|
goto out;
|
|
if (pdev->id.coreid == SSB_DEV_PCI) {
|
|
ssb_pcicore_pci_setup_workarounds(pc);
|
|
} else {
|
|
WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
|
|
ssb_pcicore_pcie_setup_workarounds(pc);
|
|
}
|
|
pc->setup_done = 1;
|
|
out:
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable);
|