linux_dsm_epyc7002/include
David S. Miller 6c2257062e mlx5e-pedit 2017-03-28
Or Gerlitz says:
 
 This series adds support for offloading modifications of packet headers using
 ConnectX-5 HW header re-write as an action applied during packet steering.
 
 The offloaded SW mechanism is TC's pedit action. The offloading is
 supported for E-Switch steering of VF traffic in the SRIOV
 switchdev mode and for NIC (non eswitch) RX.
 
 One use-case for this offload on virtual networks, is when the hypervisor
 implements flow based router such as Open-Stack's DVR, where L2 headers
 of guest packets re-written with routers' MAC addresses and the IP TTL
 is decremented.
 
 Another use case (which can be applied in parallel with routing) is
 stateless NAT where guest L3/L4 headers are re-written.
 
 The series is built as follows: the 1st six patches are preperations which
 don't yet add new functionality, patches 7-8 add the FW APIs (data-structures
 and commands) for header re-write, and patch nine allows offloading driver
 to access pedit keys.
 
 The 10th patch is somehow the core of the series, where we translate from
 the pedit way to represent set of header modification elements to the FW
 API for that same matter.
 
 Once a set of HW modification is established, we register it with the FW
 and get a modify header ID. When this ID is used with an action during
 packet steering, the HW applies the header modification on the packet.
 
 Patches 11 and 12 implement the above logic as an offload for pedit action
 for the NIC and E-Switch use-cases.
 
 I'd like to thanks Elijah Shakkour <elijahs@mellanox.com> for implementing
 and helping me testing this functionality on HW simulator, before it could
 be done with FW.
 
 - Or.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJY2lwEAAoJEEg/ir3gV/o+rFIH+wdwGawEjoDhpihLqJHoRtwo
 Wvy88Lczj++Pfzt9E0kgwgmOdnj7j+GVOh6ALjneE3PDBJEFWG/GWY5aRYonlhhf
 zibafMTYf+8Dmm9qHW/C4OvhQowSrkG1RDucM2eyjXJfnAShZCh7dV4CDD7paxhu
 N2rlDdSEl0Im4aPCNHzyrdGg06Fy3A0DQkDvVLIQhKV0cLPIoC0U/i+ymVtsCUY/
 sSEEuSohvwdD5Ga5ZZdKicCo61lIRSi2rX5v4sK0exhAO3S8xyrKnwbiN7nVAQqg
 eVZ/ekbBiksD8MRMKctt/zGxd0X4PDaQ8J9XyF9CL6pRC5VipsDy+P/GEhj/x8U=
 =l2Qo
 -----END PGP SIGNATURE-----

Merge tag 'mlx5e-pedit' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Or Gerlitz says:

====================
mlx5e-pedit 2017-03-28

This series adds support for offloading modifications of packet headers using
ConnectX-5 HW header re-write as an action applied during packet steering.

The offloaded SW mechanism is TC's pedit action. The offloading is
supported for E-Switch steering of VF traffic in the SRIOV
switchdev mode and for NIC (non eswitch) RX.

One use-case for this offload on virtual networks, is when the hypervisor
implements flow based router such as Open-Stack's DVR, where L2 headers
of guest packets re-written with routers' MAC addresses and the IP TTL
is decremented.

Another use case (which can be applied in parallel with routing) is
stateless NAT where guest L3/L4 headers are re-written.

The series is built as follows: the 1st six patches are preperations which
don't yet add new functionality, patches 7-8 add the FW APIs (data-structures
and commands) for header re-write, and patch nine allows offloading driver
to access pedit keys.

The 10th patch is somehow the core of the series, where we translate from
the pedit way to represent set of header modification elements to the FW
API for that same matter.

Once a set of HW modification is established, we register it with the FW
and get a modify header ID. When this ID is used with an action during
packet steering, the HW applies the header modification on the packet.

Patches 11 and 12 implement the above logic as an offload for pedit action
for the NIC and E-Switch use-cases.

I'd like to thanks Elijah Shakkour <elijahs@mellanox.com> for implementing
and helping me testing this functionality on HW simulator, before it could
be done with FW.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29 11:24:21 -07:00
..
acpi
asm-generic mm: convert generic code to 5-level paging 2017-03-09 11:48:47 -08:00
clocksource
crypto net: Work around lockdep limitation in sockets that use sockets 2017-03-09 18:23:27 -08:00
drm sched/headers: Prepare to remove the <linux/mm_types.h> dependency from <linux/sched.h> 2017-03-02 08:42:37 +01:00
dt-bindings scripts/spelling.txt: add "overide" pattern and fix typo instances 2017-03-09 17:01:09 -08:00
keys KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload() 2017-03-02 10:09:00 +11:00
kvm
linux mlx5e-pedit 2017-03-28 2017-03-29 11:24:21 -07:00
math-emu
media media fixes for v4.11-rc2 2017-03-09 15:50:56 -08:00
memory
misc
net mlx5e-pedit 2017-03-28 2017-03-29 11:24:21 -07:00
pcmcia
ras
rdma sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h> 2017-03-02 08:42:31 +01:00
rxrpc
scsi scsi: mpt3sas: Avoid sleeping in interrupt context 2017-03-01 21:52:13 -05:00
soc
sound sched/headers: Prepare to remove spurious <linux/sched.h> inclusion dependencies 2017-03-02 08:42:41 +01:00
target target: fix ALUA transition timeout handling 2017-03-18 14:47:28 -07:00
trace There was some breakage with the changes for jump labels in the 4.11 merge 2017-03-07 09:37:28 -08:00
uapi rtnetlink: Add RTM_DELNETCONF 2017-03-28 22:32:42 -07:00
video
xen Merge branch 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb 2017-03-07 10:23:17 -08:00
Kbuild