linux_dsm_epyc7002/drivers/spi/spi-dw-pci.c
Serge Semin 5778441172
spi: dw: Cleanup generic DW DMA code namings
Since from now the former Intel MID platform layer is used as a generic
DW SPI DMA module, let's alter the internal methods naming to be
DMA-related instead of having the "mid_" prefix.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-14-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29 15:55:52 +01:00

220 lines
5.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* PCI interface driver for DW SPI Core
*
* Copyright (c) 2009, 2014 Intel Corporation.
*/
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include "spi-dw.h"
#define DRIVER_NAME "dw_spi_pci"
/* HW info for MRST Clk Control Unit, 32b reg per controller */
#define MRST_SPI_CLK_BASE 100000000 /* 100m */
#define MRST_CLK_SPI_REG 0xff11d86c
#define CLK_SPI_BDIV_OFFSET 0
#define CLK_SPI_BDIV_MASK 0x00000007
#define CLK_SPI_CDIV_OFFSET 9
#define CLK_SPI_CDIV_MASK 0x00000e00
#define CLK_SPI_DISABLE_OFFSET 8
struct spi_pci_desc {
int (*setup)(struct dw_spi *);
u16 num_cs;
u16 bus_num;
u32 max_freq;
};
static int spi_mid_init(struct dw_spi *dws)
{
void __iomem *clk_reg;
u32 clk_cdiv;
clk_reg = ioremap(MRST_CLK_SPI_REG, 16);
if (!clk_reg)
return -ENOMEM;
/* Get SPI controller operating freq info */
clk_cdiv = readl(clk_reg + dws->bus_num * sizeof(u32));
clk_cdiv &= CLK_SPI_CDIV_MASK;
clk_cdiv >>= CLK_SPI_CDIV_OFFSET;
dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
iounmap(clk_reg);
/* Register hook to configure CTRLR0 */
dws->update_cr0 = dw_spi_update_cr0;
dw_spi_dma_setup_mfld(dws);
return 0;
}
static int spi_generic_init(struct dw_spi *dws)
{
/* Register hook to configure CTRLR0 */
dws->update_cr0 = dw_spi_update_cr0;
dw_spi_dma_setup_generic(dws);
return 0;
}
static struct spi_pci_desc spi_pci_mid_desc_1 = {
.setup = spi_mid_init,
.num_cs = 5,
.bus_num = 0,
};
static struct spi_pci_desc spi_pci_mid_desc_2 = {
.setup = spi_mid_init,
.num_cs = 2,
.bus_num = 1,
};
static struct spi_pci_desc spi_pci_ehl_desc = {
.setup = spi_generic_init,
.num_cs = 2,
.bus_num = -1,
.max_freq = 100000000,
};
static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct dw_spi *dws;
struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data;
int pci_bar = 0;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
dws = devm_kzalloc(&pdev->dev, sizeof(*dws), GFP_KERNEL);
if (!dws)
return -ENOMEM;
/* Get basic io resource and map it */
dws->paddr = pci_resource_start(pdev, pci_bar);
pci_set_master(pdev);
ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev));
if (ret)
return ret;
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
dws->regs = pcim_iomap_table(pdev)[pci_bar];
dws->irq = pci_irq_vector(pdev, 0);
/*
* Specific handling for platforms, like dma setup,
* clock rate, FIFO depth.
*/
if (desc) {
dws->num_cs = desc->num_cs;
dws->bus_num = desc->bus_num;
dws->max_freq = desc->max_freq;
if (desc->setup) {
ret = desc->setup(dws);
if (ret)
return ret;
}
} else {
pci_free_irq_vectors(pdev);
return -ENODEV;
}
ret = dw_spi_add_host(&pdev->dev, dws);
if (ret) {
pci_free_irq_vectors(pdev);
return ret;
}
/* PCI hook and SPI hook use the same drv data */
pci_set_drvdata(pdev, dws);
dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
pdev->vendor, pdev->device);
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void spi_pci_remove(struct pci_dev *pdev)
{
struct dw_spi *dws = pci_get_drvdata(pdev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
dw_spi_remove_host(dws);
pci_free_irq_vectors(pdev);
}
#ifdef CONFIG_PM_SLEEP
static int spi_suspend(struct device *dev)
{
struct dw_spi *dws = dev_get_drvdata(dev);
return dw_spi_suspend_host(dws);
}
static int spi_resume(struct device *dev)
{
struct dw_spi *dws = dev_get_drvdata(dev);
return dw_spi_resume_host(dws);
}
#endif
static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume);
static const struct pci_device_id pci_ids[] = {
/* Intel MID platform SPI controller 0 */
/*
* The access to the device 8086:0801 is disabled by HW, since it's
* exclusively used by SCU to communicate with MSIC.
*/
/* Intel MID platform SPI controller 1 */
{ PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc_1},
/* Intel MID platform SPI controller 2 */
{ PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&spi_pci_mid_desc_2},
/* Intel Elkhart Lake PSE SPI controllers */
{ PCI_VDEVICE(INTEL, 0x4b84), (kernel_ulong_t)&spi_pci_ehl_desc},
{ PCI_VDEVICE(INTEL, 0x4b85), (kernel_ulong_t)&spi_pci_ehl_desc},
{ PCI_VDEVICE(INTEL, 0x4b86), (kernel_ulong_t)&spi_pci_ehl_desc},
{ PCI_VDEVICE(INTEL, 0x4b87), (kernel_ulong_t)&spi_pci_ehl_desc},
{},
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static struct pci_driver dw_spi_driver = {
.name = DRIVER_NAME,
.id_table = pci_ids,
.probe = spi_pci_probe,
.remove = spi_pci_remove,
.driver = {
.pm = &dw_spi_pm_ops,
},
};
module_pci_driver(dw_spi_driver);
MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
MODULE_DESCRIPTION("PCI interface driver for DW SPI Core");
MODULE_LICENSE("GPL v2");