linux_dsm_epyc7002/drivers/tty/serial
Christopher Covington 1aabf523a2 tty: amba-pl011: Use 32-bit accesses for SBSA UART
Version 2 of the Server Base System Architecture (SBSAv2) describes UART
hardware registers as 32 bits wide, giving no guidance on access sizes. The
SBSA UART driver previously assumed partial-length 16 and 8 bit accesses would
work. But the SBSAv2 UART hardware on the Qualcomm Technologies QDF2432 only
supports full-length 32 bit register accesses, so use those exclusively. This
is compatible with SBSAv3, which explicitly requires UART hardware support 32
(and 16 and sometimes 8) bit accesses.

Tested on Juno, Midway, QDF2432, Seattle, and X-Gene 1.

Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
..
8250 serial: 8250_pci: fix divide error bug if baud rate is 0 2016-04-28 20:07:10 -07:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm tty: serial: jsm_tty: fixed redundant variable issue. 2016-02-07 13:36:09 -08:00
21285.c
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c serial: altera_uart: Use of_property_read_u32 instead of open-coding it 2015-10-04 17:47:49 +01:00
amba-pl010.c
amba-pl011.c tty: amba-pl011: Use 32-bit accesses for SBSA UART 2016-04-30 09:26:55 -07:00
amba-pl011.h tty: amba-pl011: clean up LCR register offsets 2015-12-13 19:59:48 -08:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c
arc_uart.c earlycon: Use common framework for earlycon declarations 2016-02-06 22:07:37 -08:00
atmel_serial.c tty/serial: atmel: fix hardware handshake selection 2016-04-28 20:07:10 -07:00
bcm63xx_uart.c serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes 2015-12-13 19:59:48 -08:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c serial:bfin-uart:Remove 'struct timeval' 2015-12-13 19:59:48 -08:00
clps711x.c serial: clps711x: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
crisv10.c tty: Remove ASYNC_CLOSING 2016-01-28 14:19:12 -08:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c serial: earlycon: Show the earlycon "driver" in banner 2016-02-06 22:07:37 -08:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c serial: fsl_lpuart: add earlycon support 2015-10-17 21:18:30 -07:00
icom.c tty: Remove unused SERIAL_DO_RESTART define 2015-12-13 19:59:48 -08:00
icom.h
ifx6x60.c serial: ifx6x60: avoid uninitialized variable use 2016-03-07 16:11:14 -08:00
ifx6x60.h
imx.c serial: imx: Fix suspend / resume. 2016-02-06 22:53:43 -08:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig serial: mvebu-uart: initial support for Armada-3700 serial port 2016-03-07 16:11:14 -08:00
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio_reg.h
m32r_sio.c TTY: serial/m32r_sio, remove unused members 2016-02-06 22:16:58 -08:00
Makefile serial: mvebu-uart: initial support for Armada-3700 serial port 2016-03-07 16:11:14 -08:00
max310x.c gpio: change member .dev to .parent 2015-11-19 09:24:35 +01:00
max3100.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c serial/men_z135_uart: Deinline men_z135_reg_clr, save 176 bytes 2015-12-13 19:59:48 -08:00
meson_uart.c tty: serial: meson: Add support for XTAL clock input 2016-02-14 17:39:36 -08:00
mpc52xx_uart.c tty: serial: constify psc_ops structs 2016-02-06 22:31:47 -08:00
mpsc.c TTY: serial/mpsc, remove unused fields 2016-02-06 22:16:21 -08:00
msm_serial.c earlycon: Use common framework for earlycon declarations 2016-02-06 22:07:37 -08:00
msm_serial.h tty: serial: msm: Add RX DMA support 2015-10-04 19:15:17 +01:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mvebu-uart.c serial: mvebu-uart: initial support for Armada-3700 serial port 2016-03-07 16:11:14 -08:00
mxs-auart.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
netx-serial.c
omap-serial.c Merge 4.5-rc4 into tty-next 2016-02-14 14:36:04 -08:00
pch_uart.c
pmac_zilog.c
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial/pxa: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
rp2.c
sa1100.c
samsung.c serial: samsung: optimize UART rx fifo access routine 2016-03-07 16:11:14 -08:00
samsung.h serial: samsung: fix DMA mode enter condition for small FIFO sizes 2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c Revert "sc16is7xx: implemented get_mctrl" 2016-03-07 16:10:08 -08:00
sccnxp.c
serial_core.c serial: core: remove baud_rates when serial console setup 2016-02-06 22:54:55 -08:00
serial_ks8695.c serial: Fix ASYNC_* => UPF_* flags misuse 2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c serial: mctrl_gpio: Add missing module license 2016-03-07 16:11:14 -08:00
serial_mctrl_gpio.h serial: fix mctrl helper functions 2015-10-17 21:21:07 -07:00
serial_txx9.c
serial-tegra.c serial: tegra: Add helper function for handling RX buffer 2015-10-17 21:07:57 -07:00
sh-sci.c serial: sh-sci: Remove redundant instances of EARLYCON_DECLARE() 2016-03-07 16:11:14 -08:00
sh-sci.h serial: sh-sci: Add more Serial Mode Register documentation 2016-02-06 22:54:55 -08:00
sirfsoc_uart.c serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sirfsoc_uart.h serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c earlycon: Use common framework for earlycon declarations 2016-02-06 22:07:37 -08:00
st-asc.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
stm32-usart.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c tty/serial: Skip 'NULL' char after console break when sysrq enabled 2015-12-24 12:13:37 -05:00
sunsab.c
sunsab.h
sunsu.c serial/sunsu: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c Revert "serial-uartlite: Constify uartlite_be/uartlite_le" 2016-04-19 15:15:38 +09:00
ucc_uart.c QE: Move QE from arch/powerpc to drivers/soc 2015-12-22 17:12:56 -06:00
vr41xx_siu.c
vt8500_serial.c serial/vt8500_serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
xilinx_uartps.c serial: xuartps: Enable OF earlycon support 2016-03-07 16:11:14 -08:00
zs.c serial: zs: Fix a transmit lockup in console output 2016-02-06 23:13:30 -08:00
zs.h