AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 10:15:13 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
1a68ab4d4c
linux_dsm_epyc7002/arch/arm/boot/dts/sun8i-a83t.dtsi
Quentin Schulz 2db639d8c1
ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq 
The Allwinner A83T is an octacore A7 divided in two clusters of 4 A7,
each cluster having its own regulator and clock.

The operating points were found in Allwinner BSP and fex files.

Note that there are a few OPPs that are missing:

1608000000Hz with 920000mV
1800000000Hz with 1000000mV
2016000000Hz with 1080000mV

These OPPs are pretty unstable but it might be due to the SoC quickly
overheating (till the board completely shuts down).
It seems impossible to reach those frequencies with none or passive
cooling, so better leave them out by default.

It's still possible to add those OPPs on a per-board basis though.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
[maxime: Reordered the nodes alphabetically]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-02-28 15:26:59 +01:00

967 lines
24 KiB
Plaintext
Raw Blame History

/*
* Copyright 2015 Vishnu Patekar
*
* Vishnu Patekar <vishnupatekar0510@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-a83t-ccu.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/reset/sun8i-a83t-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
clocks = <&ccu CLK_C0CPUX>;
clock-names = "cpu";
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
reg = <3>;
};
cpu100: cpu@100 {
clocks = <&ccu CLK_C1CPUX>;
clock-names = "cpu";
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
reg = <0x100>;
};
cpu@101 {
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
reg = <0x101>;
};
cpu@102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
reg = <0x102>;
};
cpu@103 {
compatible = "arm,cortex-a7";
device_type = "cpu";
operating-points-v2 = <&cpu1_opp_table>;
reg = <0x103>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/* TODO: PRCM block has a mux for this. */
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
/*
* This is called "internal OSC" in some places.
* It is an internal RC-based oscillator.
* TODO: Its controls are in the PRCM block.
*/
osc16M: osc16M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-output-names = "osc16M";
};
osc16Md512: osc16Md512_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <512>;
clock-mult = <1>;
clocks = <&osc16M>;
clock-output-names = "osc16M-d512";
};
};
de: display-engine {
compatible = "allwinner,sun8i-a83t-display-engine";
allwinner,pipelines = <&mixer0>, <&mixer1>;
status = "disabled";
};
memory {
reg = <0x40000000 0x80000000>;
device_type = "memory";
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-864000000 {
opp-hz = /bits/ 64 <864000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-912000000 {
opp-hz = /bits/ 64 <912000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1128000000 {
opp-hz = /bits/ 64 <1128000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
};
cpu1_opp_table: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-864000000 {
opp-hz = /bits/ 64 <864000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-912000000 {
opp-hz = /bits/ 64 <912000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1128000000 {
opp-hz = /bits/ 64 <1128000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <840000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-a83t-de2-clk";
reg = <0x01000000 0x100000>;
clocks = <&ccu CLK_PLL_DE>,
<&ccu CLK_BUS_DE>;
clock-names = "mod",
"bus";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@1100000 {
compatible = "allwinner,sun8i-a83t-de2-mixer-0";
reg = <0x01100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mixer0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_mixer0>;
};
};
};
};
mixer1: mixer@1200000 {
compatible = "allwinner,sun8i-a83t-de2-mixer-1";
reg = <0x01200000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER1>,
<&display_clocks CLK_MIXER1>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_WB>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer1_out: port@1 {
reg = <1>;
mixer1_out_tcon1: endpoint {
remote-endpoint = <&tcon1_in_mixer1>;
};
};
};
};
syscon: syscon@1c00000 {
compatible = "allwinner,sun8i-a83t-system-controller",
"syscon";
reg = <0x01c00000 0x1000>;
};
dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-a83t-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DMA>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-a83t-tcon-lcd";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun8i-a83t-tcon-tv";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON1>;
reset-names = "lcd";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon1_in: port@0 {
reg = <0>;
tcon1_in_mixer1: endpoint {
remote-endpoint = <&mixer1_out_tcon1>;
};
};
tcon1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon1_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon1>;
};
};
};
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun8i-a83t-mmc",
"allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
<&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@1c10000 {
compatible = "allwinner,sun8i-a83t-mmc",
"allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
<&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@1c11000 {
compatible = "allwinner,sun8i-a83t-emmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
<&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a83t-musb",
"allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@1c19400 {
compatible = "allwinner,sun8i-a83t-usb-phy";
reg = <0x01c19400 0x10>,
<0x01c1a800 0x14>,
<0x01c1b800 0x14>;
reg-names = "phy_ctrl",
"pmu1",
"pmu2";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_HSIC>,
<&ccu CLK_USB_HSIC_12M>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy",
"usb2_hsic_12M";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_HSIC>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-a83t-ehci",
"generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI0>;
resets = <&ccu RST_BUS_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-a83t-ohci",
"generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ehci1: usb@1c1b000 {
compatible = "allwinner,sun8i-a83t-ehci",
"generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-a83t-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc16Md512>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-a83t-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c20800 0x400>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
emac_rgmii_pins: emac-rgmii-pins {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD11", "PD12", "PD13", "PD14", "PD18",
"PD19", "PD21", "PD22", "PD23";
function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
drive-strength = <40>;
};
hdmi_pins: hdmi-pins {
pins = "PH6", "PH7", "PH8";
function = "hdmi";
};
i2c0_pins: i2c0-pins {
pins = "PH0", "PH1";
function = "i2c0";
};
i2c1_pins: i2c1-pins {
pins = "PH2", "PH3";
function = "i2c1";
};
i2c2_ph_pins: i2c2-ph-pins {
pins = "PH4", "PH5";
function = "i2c2";
};
i2s1_pins: i2s1-pins {
/* I2S1 does not have external MCLK pin */
pins = "PG10", "PG11", "PG12", "PG13";
function = "i2s1";
};
lcd_lvds_pins: lcd-lvds-pins {
pins = "PD18", "PD19", "PD20", "PD21", "PD22",
"PD23", "PD24", "PD25", "PD26", "PD27";
function = "lvds0";
};
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
pins = "PC5", "PC6", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
pwm_pin: pwm-pin {
pins = "PD28";
function = "pwm";
};
spdif_tx_pin: spdif-tx-pin {
pins = "PE18";
function = "spdif";
};
uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
function = "uart0";
};
uart0_pf_pins: uart0-pf-pins {
pins = "PF2", "PF4";
function = "uart0";
};
uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
};
};
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a83t-spdif",
"allwinner,sun8i-h3-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
resets = <&ccu RST_BUS_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma 2>;
dma-names = "tx";
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pin>;
status = "disabled";
};
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a83t-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma 3>, <&dma 3>;
resets = <&ccu RST_BUS_I2S0>;
dma-names = "rx", "tx";
status = "disabled";
};
i2s1: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a83t-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma 4>, <&dma 4>;
resets = <&ccu RST_BUS_I2S1>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_pins>;
status = "disabled";
};
i2s2: i2s@1c22800 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a83t-i2s";
reg = <0x01c22800 0x400>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma 27>;
resets = <&ccu RST_BUS_I2S2>;
dma-names = "tx";
status = "disabled";
};
pwm: pwm@1c21400 {
compatible = "allwinner,sun8i-a83t-pwm",
"allwinner,sun8i-h3-pwm";
reg = <0x01c21400 0x400>;
clocks = <&osc24M>;
#pwm-cells = <3>;
status = "disabled";
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun8i-a83t-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun8i-a83t-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun8i-a83t-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
emac: ethernet@1c30000 {
compatible = "allwinner,sun8i-a83t-emac";
syscon = <&syscon>;
reg = <0x01c30000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu 13>;
reset-names = "stmmaceth";
clocks = <&ccu 27>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon1: endpoint {
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-a83t-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun8i-a83t-r-intc",
"allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01f00c00 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
r_ccu: clock@1f01400 {
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
<&ccu 6>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
<&osc16Md512>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
drive-strength = <20>;
bias-pull-up;
};
};
r_rsb: rsb@1f03400 {
compatible = "allwinner,sun8i-a83t-rsb",
"allwinner,sun8i-a23-rsb";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_RSB>;
clock-frequency = <3000000>;
resets = <&r_ccu RST_APB0_RSB>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink