linux_dsm_epyc7002/drivers/iio/adc
Greg Kroah-Hartman 3f3d31622a First set of IIO fixes for the 5.4 cycle.
* adis16400
   - Make sure to free memory on a few failure paths.
 * adxl372
   - Fix wrong fifo depth
   - Fix wrong indexing of data from the fifo.
   - Perform a reset at startup to avoid a problem with inconsistent state.
 * axp288
   - This is a fix for a fix.  The original fix made sure we kept the
     configuration from some firmwares to preserve a bias current.
     Unfortunately it appears the previous behaviour was working around
     a buggy firmware by overwriting the wrong value it had.  Hence
     a regression was seen.
 * bmc150
   - Fix the centre temperature.  This was due to an error in one of the
     datasheets.
 * hx711
   - Fix an issue where a badly timed interrupt could lead to a control
     line being high long enough to put the device into a low power state.
 * meson_sar_adc
   - Fix a case where the irq was enabled before everything it uses was
     allocated.
 * st_lsm6dsx
   - Ensure we don't set the sensor sensitivity to 0 as it will force
     all readings to 0.
   - Fix a wait time for the slave i2c controller when the accelerometer
     is not enabled.
 * stm32-adc
   - Precursor for fix. Move a set of register definitions to a header.
   - Fix a race when several ADCs are in use with some using interrupts
     to control the dataflow and some using DMA.
 * vcnl4000
   - Fix a garbage of_match_table in which a string was passed instead
     of the intended enum.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl2eJHgRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojPzA/+KHWytPVz58/DWZ2tRYvfcj4xF3HGEbOV
 FX1qgDVe1zixHkL8S3R5tNhdCSIl1016tknBv1ZcE1M8BewQF+GE6eyAw+5Gm8Ge
 3P1dt17EHfvcOpMBNMP1c9Mp/+OdKs+cSjp8G2MN2O0UGGBQdTPuhC+l4nzmOwCo
 kbAass0JVTlgxxgcnh6D37Slq4/QqZJBwEmHWEHQJmQfGd+ue+VEdh3XFLPC+gu9
 xh63WkubPuzkW2u9iJBDmGedq70pcMbfq6Fj+4YWdxrf0NzNwZIpVaIBRT4/15T0
 h+OVFnmFZVRoyiC7WvntIO4/dc3EtxOTTm38OqQpDpy/9DfkI+Nn5Z0bninIU5/x
 QT8puyyiuoOABHIttDabxSJQphjH3QeoCnWZiaGy/4ZZl1iHQsxF69N4WaDLl8An
 G/oqy0Zjb1C4pID1RY3jB+kdqRIZD+o0keoSxM2eIt9qcZXIQUHoGNuBXxrHWYis
 OGxuGci5Vr6IF3KOL3KG08at9JVwFiQRKRebOWn7eCiT8iTqyujHGh2HxBvRvZxq
 KXMqanTjbbwmv1vl+yMPYwuPPpcMTOxOhhBuT4L0TqYMi2dlnA8BP+YIIZFsOxbg
 LSJUZn1to9TTkjNCW4q3fTkrlgcBL9MGnQtzAgDzdvnwDqVG7cWYhsYSvxh7hpTN
 4EUtoqLKgjI=
 =s9EA
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.4 cycle.

* adis16400
  - Make sure to free memory on a few failure paths.
* adxl372
  - Fix wrong fifo depth
  - Fix wrong indexing of data from the fifo.
  - Perform a reset at startup to avoid a problem with inconsistent state.
* axp288
  - This is a fix for a fix.  The original fix made sure we kept the
    configuration from some firmwares to preserve a bias current.
    Unfortunately it appears the previous behaviour was working around
    a buggy firmware by overwriting the wrong value it had.  Hence
    a regression was seen.
* bmc150
  - Fix the centre temperature.  This was due to an error in one of the
    datasheets.
* hx711
  - Fix an issue where a badly timed interrupt could lead to a control
    line being high long enough to put the device into a low power state.
* meson_sar_adc
  - Fix a case where the irq was enabled before everything it uses was
    allocated.
* st_lsm6dsx
  - Ensure we don't set the sensor sensitivity to 0 as it will force
    all readings to 0.
  - Fix a wait time for the slave i2c controller when the accelerometer
    is not enabled.
* stm32-adc
  - Precursor for fix. Move a set of register definitions to a header.
  - Fix a race when several ADCs are in use with some using interrupts
    to control the dataflow and some using DMA.
* vcnl4000
  - Fix a garbage of_match_table in which a string was passed instead
    of the intended enum.

* tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: Fix an undefied reference error in noa1305_probe
  iio: light: opt3001: fix mutex unlock race
  iio: adc: ad799x: fix probe error handling
  iio: light: add missing vcnl4040 of_compatible
  iio: light: fix vcnl4000 devicetree hooks
  iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  iio: adc: axp288: Override TS pin bias current for some models
  iio: imu: adis16400: fix memory leak
  iio: imu: adis16400: release allocated memory on failure
  iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
  iio: adc: stm32-adc: move registers definitions
  iio: accel: adxl372: Perform a reset at start up
  iio: accel: adxl372: Fix push to buffers lost samples
  iio: accel: adxl372: Fix/remove limitation for FIFO samples
  iio: adc: hx711: fix bug in sampling of data
  iio: fix center temperature of bmc150-accel-core
  iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
  iio: adc: meson_saradc: Fix memory allocation order
2019-10-10 11:18:37 +02:00
..
ad799x.c iio: adc: ad799x: fix probe error handling 2019-10-09 19:11:29 +01:00
ad7124.c iio: adc: ad7124: Shift to dynamic allocation for channel configuration 2019-06-26 21:24:21 +01:00
ad7266.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad7291.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ad7298.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad7476.c iio: adc: ad7476: Add support for TI ADS786X ADCs 2019-02-09 18:46:02 +00:00
ad7606_par.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
ad7606_spi.c iio: adc: ad7606: Add support for AD7606B ADC 2019-08-25 16:11:00 +01:00
ad7606.c iio: adc: ad7606: Add support for AD7606B ADC 2019-08-25 16:11:00 +01:00
ad7606.h iio: adc: ad7606: Add support for AD7606B ADC 2019-08-25 16:11:00 +01:00
ad7766.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ad7768-1.c iio: adc: ad7768-1: Add support for setting the sampling frequency 2019-02-09 18:46:01 +00:00
ad7780.c iio: adc: ad7780: Add parentheses to macros 2019-04-04 20:20:30 +01:00
ad7791.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad7793.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad7887.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad7923.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad7949.c iio:adc:ad7949: Add AD7949 ADC driver family 2018-11-03 09:44:34 +00:00
ad_sigma_delta.c Second set of IIO device support, features, cleanups and minor fixes for 5.3. 2019-07-01 10:58:13 +02:00
aspeed_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422 2019-06-05 17:37:15 +02:00
at91_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
at91-sama5d2_adc.c Merge 5.2-rc6 into staging-next 2019-06-23 13:29:03 +02:00
axp20x_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
axp288_adc.c iio: adc: axp288: Override TS pin bias current for some models 2019-10-09 19:11:27 +01:00
bcm_iproc_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
berlin2-adc.c
cc10001_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
cpcap-adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
da9150-gpadc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
dln2-adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372 2019-06-05 17:37:10 +02:00
envelope-detector.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
ep93xx_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
exynos_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
fsl-imx25-gcq.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
hi8435.c iio: hi8435: Drop hi8435_remove() by using devres for remaining elements 2019-08-11 09:59:38 +01:00
hx711.c iio: adc: hx711: fix bug in sampling of data 2019-10-09 19:11:25 +01:00
imx7d_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
ina2xx-adc.c iio: adc: ina2xx: add in early -EINVAL returns in case statements 2018-10-21 15:43:11 +01:00
ingenic-adc.c IIO: Ingenic JZ47xx: Set clock divider on probe 2019-07-14 16:02:08 +01:00
Kconfig hwmon: Remove ads1015 driver 2019-09-03 12:47:17 -07:00
lp8788_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
lpc18xx_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
lpc32xx_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
ltc2471.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 253 2019-06-05 17:30:27 +02:00
ltc2485.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ltc2497.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
Makefile iio: adc: Add driver for the TI ADS8344 A/DC chips 2019-04-22 11:34:13 +01:00
max1027.c iio: adc: max1027: Use device-managed APIs 2019-08-18 20:16:46 +01:00
max1118.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330 2019-06-05 17:37:06 +02:00
max1363.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
max9611.c iio: adc: max9611: Fix temperature reading in probe 2019-08-05 17:42:24 +01:00
max11100.c iio: adc: max11100: convert to SPDX identifiers 2018-11-16 18:32:27 +00:00
mcp320x.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mcp3422.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
mcp3911.c iio: adc: add support for mcp3911 2018-08-19 20:02:48 +01:00
men_z188_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 2019-06-05 17:37:17 +02:00
meson_saradc.c iio: adc: meson_saradc: Fix memory allocation order 2019-09-08 12:30:32 +01:00
mt6577_auxadc.c Merge 5.2-rc3 into staging-next 2019-06-03 07:27:16 +02:00
mxs-lradc-adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
nau7802.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 71 2019-05-24 17:36:47 +02:00
npcm_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
palmas_gpadc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372 2019-06-05 17:37:10 +02:00
qcom-pm8xxx-xoadc.c treewide: Add SPDX license identifier for more missed files 2019-05-21 10:50:45 +02:00
qcom-spmi-adc5.c iio: adc: qcom-spmi-adc5: Fix of-based module autoloading 2019-04-22 11:51:29 +01:00
qcom-spmi-iadc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
qcom-spmi-vadc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
qcom-vadc-common.c iio: adc: Add QCOM SPMI PMIC5 ADC driver 2018-08-18 18:11:43 +01:00
qcom-vadc-common.h iio: adc: Add QCOM SPMI PMIC5 ADC driver 2018-08-18 18:11:43 +01:00
rcar-gyroadc.c iio: adc: gyroadc: fix uninitialized return code 2019-07-27 21:56:59 +01:00
rockchip_saradc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
sc27xx_adc.c iio: adc: sc27xx: Change to polling mode to read data 2019-08-18 20:26:47 +01:00
sd_adc_modulator.c IIO: ADC: add sigma delta modulator support 2018-01-10 10:30:09 +00:00
spear_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
stm32-adc-core.c iio: adc: stm32-adc: fix a race when using several adcs with dma and irq 2019-10-09 19:11:26 +01:00
stm32-adc-core.h iio: adc: stm32-adc: fix a race when using several adcs with dma and irq 2019-10-09 19:11:26 +01:00
stm32-adc.c iio: adc: stm32-adc: move registers definitions 2019-10-09 19:11:26 +01:00
stm32-dfsdm-adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
stm32-dfsdm-core.c iio: adc: stm32-dfsdm: missing error case during probe 2019-04-27 14:09:28 +01:00
stm32-dfsdm.h iio: adc: stm32-dfsdm: add fast mode support 2019-06-22 10:29:19 +01:00
stmpe-adc.c iio: stmpe-adc: Reset possible interrupts 2019-05-11 11:18:34 +01:00
stx104.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
sun4i-gpadc-iio.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
ti_am335x_adc.c iio: adc: ti_am335x_tscadc: Improve accuracy of measurement 2018-12-03 11:33:20 +00:00
ti-adc081c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ti-adc084s021.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ti-adc108s102.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288 2019-06-05 17:36:37 +02:00
ti-adc128s052.c iio: adc128s052: use SPDX-License-Identifier 2018-11-03 09:44:33 +00:00
ti-adc161s626.c iio: add SPDX identifier for various drivers 2018-02-18 11:55:19 +00:00
ti-adc0832.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330 2019-06-05 17:37:06 +02:00
ti-adc12138.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330 2019-06-05 17:37:06 +02:00
ti-ads124s08.c iio: adc: ads124: avoid buffer overflow 2019-04-07 13:01:36 +01:00
ti-ads1015.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330 2019-06-05 17:37:06 +02:00
ti-ads7950.c iio: adc: ti-ads7950: add GPIO support 2019-04-04 20:19:53 +01:00
ti-ads8344.c iio: adc: Add driver for the TI ADS8344 A/DC chips 2019-04-22 11:34:13 +01:00
ti-ads8688.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ti-tlc4541.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
twl4030-madc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336 2019-06-05 17:37:07 +02:00
twl6030-gpadc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
vf610_adc.c iio: Remove dev_err() usage after platform_get_irq() 2019-08-05 15:59:14 +01:00
viperboard_adc.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
xilinx-xadc-core.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
xilinx-xadc-events.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
xilinx-xadc.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00