mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:55:04 +07:00
0b255e927d
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
710 lines
15 KiB
C
710 lines
15 KiB
C
/*
|
|
* drivers/i2c/busses/i2c-rcar.c
|
|
*
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*
|
|
* This file is based on the drivers/i2c/busses/i2c-sh7760.c
|
|
* (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
|
|
*
|
|
* This file used out-of-tree driver i2c-rcar.c
|
|
* Copyright (C) 2011-2012 Renesas Electronics Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/i2c-rcar.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* register offsets */
|
|
#define ICSCR 0x00 /* slave ctrl */
|
|
#define ICMCR 0x04 /* master ctrl */
|
|
#define ICSSR 0x08 /* slave status */
|
|
#define ICMSR 0x0C /* master status */
|
|
#define ICSIER 0x10 /* slave irq enable */
|
|
#define ICMIER 0x14 /* master irq enable */
|
|
#define ICCCR 0x18 /* clock dividers */
|
|
#define ICSAR 0x1C /* slave address */
|
|
#define ICMAR 0x20 /* master address */
|
|
#define ICRXTX 0x24 /* data port */
|
|
|
|
/* ICMCR */
|
|
#define MDBS (1 << 7) /* non-fifo mode switch */
|
|
#define FSCL (1 << 6) /* override SCL pin */
|
|
#define FSDA (1 << 5) /* override SDA pin */
|
|
#define OBPC (1 << 4) /* override pins */
|
|
#define MIE (1 << 3) /* master if enable */
|
|
#define TSBE (1 << 2)
|
|
#define FSB (1 << 1) /* force stop bit */
|
|
#define ESG (1 << 0) /* en startbit gen */
|
|
|
|
/* ICMSR */
|
|
#define MNR (1 << 6) /* nack received */
|
|
#define MAL (1 << 5) /* arbitration lost */
|
|
#define MST (1 << 4) /* sent a stop */
|
|
#define MDE (1 << 3)
|
|
#define MDT (1 << 2)
|
|
#define MDR (1 << 1)
|
|
#define MAT (1 << 0) /* slave addr xfer done */
|
|
|
|
/* ICMIE */
|
|
#define MNRE (1 << 6) /* nack irq en */
|
|
#define MALE (1 << 5) /* arblos irq en */
|
|
#define MSTE (1 << 4) /* stop irq en */
|
|
#define MDEE (1 << 3)
|
|
#define MDTE (1 << 2)
|
|
#define MDRE (1 << 1)
|
|
#define MATE (1 << 0) /* address sent irq en */
|
|
|
|
|
|
enum {
|
|
RCAR_BUS_PHASE_ADDR,
|
|
RCAR_BUS_PHASE_DATA,
|
|
RCAR_BUS_PHASE_STOP,
|
|
};
|
|
|
|
enum {
|
|
RCAR_IRQ_CLOSE,
|
|
RCAR_IRQ_OPEN_FOR_SEND,
|
|
RCAR_IRQ_OPEN_FOR_RECV,
|
|
RCAR_IRQ_OPEN_FOR_STOP,
|
|
};
|
|
|
|
/*
|
|
* flags
|
|
*/
|
|
#define ID_LAST_MSG (1 << 0)
|
|
#define ID_IOERROR (1 << 1)
|
|
#define ID_DONE (1 << 2)
|
|
#define ID_ARBLOST (1 << 3)
|
|
#define ID_NACK (1 << 4)
|
|
|
|
struct rcar_i2c_priv {
|
|
void __iomem *io;
|
|
struct i2c_adapter adap;
|
|
struct i2c_msg *msg;
|
|
|
|
spinlock_t lock;
|
|
wait_queue_head_t wait;
|
|
|
|
int pos;
|
|
int irq;
|
|
u32 icccr;
|
|
u32 flags;
|
|
};
|
|
|
|
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent)
|
|
#define rcar_i2c_is_recv(p) ((p)->msg->flags & I2C_M_RD)
|
|
|
|
#define rcar_i2c_flags_set(p, f) ((p)->flags |= (f))
|
|
#define rcar_i2c_flags_has(p, f) ((p)->flags & (f))
|
|
|
|
#define LOOP_TIMEOUT 1024
|
|
|
|
/*
|
|
* basic functions
|
|
*/
|
|
static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val)
|
|
{
|
|
writel(val, priv->io + reg);
|
|
}
|
|
|
|
static u32 rcar_i2c_read(struct rcar_i2c_priv *priv, int reg)
|
|
{
|
|
return readl(priv->io + reg);
|
|
}
|
|
|
|
static void rcar_i2c_init(struct rcar_i2c_priv *priv)
|
|
{
|
|
/*
|
|
* reset slave mode.
|
|
* slave mode is not used on this driver
|
|
*/
|
|
rcar_i2c_write(priv, ICSIER, 0);
|
|
rcar_i2c_write(priv, ICSAR, 0);
|
|
rcar_i2c_write(priv, ICSCR, 0);
|
|
rcar_i2c_write(priv, ICSSR, 0);
|
|
|
|
/* reset master mode */
|
|
rcar_i2c_write(priv, ICMIER, 0);
|
|
rcar_i2c_write(priv, ICMCR, 0);
|
|
rcar_i2c_write(priv, ICMSR, 0);
|
|
rcar_i2c_write(priv, ICMAR, 0);
|
|
}
|
|
|
|
static void rcar_i2c_irq_mask(struct rcar_i2c_priv *priv, int open)
|
|
{
|
|
u32 val = MNRE | MALE | MSTE | MATE; /* default */
|
|
|
|
switch (open) {
|
|
case RCAR_IRQ_OPEN_FOR_SEND:
|
|
val |= MDEE; /* default + send */
|
|
break;
|
|
case RCAR_IRQ_OPEN_FOR_RECV:
|
|
val |= MDRE; /* default + read */
|
|
break;
|
|
case RCAR_IRQ_OPEN_FOR_STOP:
|
|
val = MSTE; /* stop irq only */
|
|
break;
|
|
case RCAR_IRQ_CLOSE:
|
|
default:
|
|
val = 0; /* all close */
|
|
break;
|
|
}
|
|
rcar_i2c_write(priv, ICMIER, val);
|
|
}
|
|
|
|
static void rcar_i2c_set_addr(struct rcar_i2c_priv *priv, u32 recv)
|
|
{
|
|
rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | recv);
|
|
}
|
|
|
|
/*
|
|
* bus control functions
|
|
*/
|
|
static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < LOOP_TIMEOUT; i++) {
|
|
/* make sure that bus is not busy */
|
|
if (!(rcar_i2c_read(priv, ICMCR) & FSDA))
|
|
return 0;
|
|
udelay(1);
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static void rcar_i2c_bus_phase(struct rcar_i2c_priv *priv, int phase)
|
|
{
|
|
switch (phase) {
|
|
case RCAR_BUS_PHASE_ADDR:
|
|
rcar_i2c_write(priv, ICMCR, MDBS | MIE | ESG);
|
|
break;
|
|
case RCAR_BUS_PHASE_DATA:
|
|
rcar_i2c_write(priv, ICMCR, MDBS | MIE);
|
|
break;
|
|
case RCAR_BUS_PHASE_STOP:
|
|
rcar_i2c_write(priv, ICMCR, MDBS | MIE | FSB);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* clock function
|
|
*/
|
|
static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
|
|
u32 bus_speed,
|
|
struct device *dev)
|
|
{
|
|
struct clk *clkp = clk_get(NULL, "peripheral_clk");
|
|
u32 scgd, cdf;
|
|
u32 round, ick;
|
|
u32 scl;
|
|
|
|
if (!clkp) {
|
|
dev_err(dev, "there is no peripheral_clk\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* calculate SCL clock
|
|
* see
|
|
* ICCCR
|
|
*
|
|
* ick = clkp / (1 + CDF)
|
|
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
|
|
*
|
|
* ick : I2C internal clock < 20 MHz
|
|
* ticf : I2C SCL falling time = 35 ns here
|
|
* tr : I2C SCL rising time = 200 ns here
|
|
* intd : LSI internal delay = 50 ns here
|
|
* clkp : peripheral_clk
|
|
* F[] : integer up-valuation
|
|
*/
|
|
for (cdf = 0; cdf < 4; cdf++) {
|
|
ick = clk_get_rate(clkp) / (1 + cdf);
|
|
if (ick < 20000000)
|
|
goto ick_find;
|
|
}
|
|
dev_err(dev, "there is no best CDF\n");
|
|
return -EIO;
|
|
|
|
ick_find:
|
|
/*
|
|
* it is impossible to calculate large scale
|
|
* number on u32. separate it
|
|
*
|
|
* F[(ticf + tr + intd) * ick]
|
|
* = F[(35 + 200 + 50)ns * ick]
|
|
* = F[285 * ick / 1000000000]
|
|
* = F[(ick / 1000000) * 285 / 1000]
|
|
*/
|
|
round = (ick + 500000) / 1000000 * 285;
|
|
round = (round + 500) / 1000;
|
|
|
|
/*
|
|
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
|
|
*
|
|
* Calculation result (= SCL) should be less than
|
|
* bus_speed for hardware safety
|
|
*/
|
|
for (scgd = 0; scgd < 0x40; scgd++) {
|
|
scl = ick / (20 + (scgd * 8) + round);
|
|
if (scl <= bus_speed)
|
|
goto scgd_find;
|
|
}
|
|
dev_err(dev, "it is impossible to calculate best SCL\n");
|
|
return -EIO;
|
|
|
|
scgd_find:
|
|
dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
|
|
scl, bus_speed, clk_get_rate(clkp), round, cdf, scgd);
|
|
|
|
/*
|
|
* keep icccr value
|
|
*/
|
|
priv->icccr = (scgd << 2 | cdf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcar_i2c_clock_start(struct rcar_i2c_priv *priv)
|
|
{
|
|
rcar_i2c_write(priv, ICCCR, priv->icccr);
|
|
}
|
|
|
|
/*
|
|
* status functions
|
|
*/
|
|
static u32 rcar_i2c_status_get(struct rcar_i2c_priv *priv)
|
|
{
|
|
return rcar_i2c_read(priv, ICMSR);
|
|
}
|
|
|
|
#define rcar_i2c_status_clear(priv) rcar_i2c_status_bit_clear(priv, 0xffffffff)
|
|
static void rcar_i2c_status_bit_clear(struct rcar_i2c_priv *priv, u32 bit)
|
|
{
|
|
rcar_i2c_write(priv, ICMSR, ~bit);
|
|
}
|
|
|
|
/*
|
|
* recv/send functions
|
|
*/
|
|
static int rcar_i2c_recv(struct rcar_i2c_priv *priv)
|
|
{
|
|
rcar_i2c_set_addr(priv, 1);
|
|
rcar_i2c_status_clear(priv);
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR);
|
|
rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_RECV);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_i2c_send(struct rcar_i2c_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* It should check bus status when send case
|
|
*/
|
|
ret = rcar_i2c_bus_barrier(priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rcar_i2c_set_addr(priv, 0);
|
|
rcar_i2c_status_clear(priv);
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR);
|
|
rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_SEND);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define rcar_i2c_send_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDE))
|
|
#define rcar_i2c_recv_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDR))
|
|
|
|
/*
|
|
* interrupt functions
|
|
*/
|
|
static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
|
|
{
|
|
struct i2c_msg *msg = priv->msg;
|
|
|
|
/*
|
|
* FIXME
|
|
* sometimes, unknown interrupt happened.
|
|
* Do nothing
|
|
*/
|
|
if (!(msr & MDE))
|
|
return 0;
|
|
|
|
/*
|
|
* If address transfer phase finished,
|
|
* goto data phase.
|
|
*/
|
|
if (msr & MAT)
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA);
|
|
|
|
if (priv->pos < msg->len) {
|
|
/*
|
|
* Prepare next data to ICRXTX register.
|
|
* This data will go to _SHIFT_ register.
|
|
*
|
|
* *
|
|
* [ICRXTX] -> [SHIFT] -> [I2C bus]
|
|
*/
|
|
rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]);
|
|
priv->pos++;
|
|
|
|
} else {
|
|
/*
|
|
* The last data was pushed to ICRXTX on _PREV_ empty irq.
|
|
* It is on _SHIFT_ register, and will sent to I2C bus.
|
|
*
|
|
* *
|
|
* [ICRXTX] -> [SHIFT] -> [I2C bus]
|
|
*/
|
|
|
|
if (priv->flags & ID_LAST_MSG)
|
|
/*
|
|
* If current msg is the _LAST_ msg,
|
|
* prepare stop condition here.
|
|
* ID_DONE will be set on STOP irq.
|
|
*/
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP);
|
|
else
|
|
/*
|
|
* If current msg is _NOT_ last msg,
|
|
* it doesn't call stop phase.
|
|
* thus, there is no STOP irq.
|
|
* return ID_DONE here.
|
|
*/
|
|
return ID_DONE;
|
|
}
|
|
|
|
rcar_i2c_send_restart(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
|
|
{
|
|
struct i2c_msg *msg = priv->msg;
|
|
|
|
/*
|
|
* FIXME
|
|
* sometimes, unknown interrupt happened.
|
|
* Do nothing
|
|
*/
|
|
if (!(msr & MDR))
|
|
return 0;
|
|
|
|
if (msr & MAT) {
|
|
/*
|
|
* Address transfer phase finished,
|
|
* but, there is no data at this point.
|
|
* Do nothing.
|
|
*/
|
|
} else if (priv->pos < msg->len) {
|
|
/*
|
|
* get received data
|
|
*/
|
|
msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX);
|
|
priv->pos++;
|
|
}
|
|
|
|
/*
|
|
* If next received data is the _LAST_,
|
|
* go to STOP phase,
|
|
* otherwise, go to DATA phase.
|
|
*/
|
|
if (priv->pos + 1 >= msg->len)
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP);
|
|
else
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA);
|
|
|
|
rcar_i2c_recv_restart(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
|
|
{
|
|
struct rcar_i2c_priv *priv = ptr;
|
|
struct device *dev = rcar_i2c_priv_to_dev(priv);
|
|
u32 msr;
|
|
|
|
/*-------------- spin lock -----------------*/
|
|
spin_lock(&priv->lock);
|
|
|
|
msr = rcar_i2c_status_get(priv);
|
|
|
|
/*
|
|
* Arbitration lost
|
|
*/
|
|
if (msr & MAL) {
|
|
/*
|
|
* CAUTION
|
|
*
|
|
* When arbitration lost, device become _slave_ mode.
|
|
*/
|
|
dev_dbg(dev, "Arbitration Lost\n");
|
|
rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST));
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Stop
|
|
*/
|
|
if (msr & MST) {
|
|
dev_dbg(dev, "Stop\n");
|
|
rcar_i2c_flags_set(priv, ID_DONE);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Nack
|
|
*/
|
|
if (msr & MNR) {
|
|
dev_dbg(dev, "Nack\n");
|
|
|
|
/* go to stop phase */
|
|
rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP);
|
|
rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_STOP);
|
|
rcar_i2c_flags_set(priv, ID_NACK);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* recv/send
|
|
*/
|
|
if (rcar_i2c_is_recv(priv))
|
|
rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
|
|
else
|
|
rcar_i2c_flags_set(priv, rcar_i2c_irq_send(priv, msr));
|
|
|
|
out:
|
|
if (rcar_i2c_flags_has(priv, ID_DONE)) {
|
|
rcar_i2c_irq_mask(priv, RCAR_IRQ_CLOSE);
|
|
rcar_i2c_status_clear(priv);
|
|
wake_up(&priv->wait);
|
|
}
|
|
|
|
spin_unlock(&priv->lock);
|
|
/*-------------- spin unlock -----------------*/
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
struct device *dev = rcar_i2c_priv_to_dev(priv);
|
|
unsigned long flags;
|
|
int i, ret, timeout;
|
|
|
|
pm_runtime_get_sync(dev);
|
|
|
|
/*-------------- spin lock -----------------*/
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
rcar_i2c_init(priv);
|
|
rcar_i2c_clock_start(priv);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
/*-------------- spin unlock -----------------*/
|
|
|
|
ret = -EINVAL;
|
|
for (i = 0; i < num; i++) {
|
|
/*-------------- spin lock -----------------*/
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* init each data */
|
|
priv->msg = &msgs[i];
|
|
priv->pos = 0;
|
|
priv->flags = 0;
|
|
if (priv->msg == &msgs[num - 1])
|
|
rcar_i2c_flags_set(priv, ID_LAST_MSG);
|
|
|
|
/* start send/recv */
|
|
if (rcar_i2c_is_recv(priv))
|
|
ret = rcar_i2c_recv(priv);
|
|
else
|
|
ret = rcar_i2c_send(priv);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
/*-------------- spin unlock -----------------*/
|
|
|
|
if (ret < 0)
|
|
break;
|
|
|
|
/*
|
|
* wait result
|
|
*/
|
|
timeout = wait_event_timeout(priv->wait,
|
|
rcar_i2c_flags_has(priv, ID_DONE),
|
|
5 * HZ);
|
|
if (!timeout) {
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* error handling
|
|
*/
|
|
if (rcar_i2c_flags_has(priv, ID_NACK)) {
|
|
ret = -EREMOTEIO;
|
|
break;
|
|
}
|
|
|
|
if (rcar_i2c_flags_has(priv, ID_ARBLOST)) {
|
|
ret = -EAGAIN;
|
|
break;
|
|
}
|
|
|
|
if (rcar_i2c_flags_has(priv, ID_IOERROR)) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
|
|
ret = i + 1; /* The number of transfer */
|
|
}
|
|
|
|
pm_runtime_put(dev);
|
|
|
|
if (ret < 0)
|
|
dev_err(dev, "error %d : %x\n", ret, priv->flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 rcar_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm rcar_i2c_algo = {
|
|
.master_xfer = rcar_i2c_master_xfer,
|
|
.functionality = rcar_i2c_func,
|
|
};
|
|
|
|
static int rcar_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct i2c_rcar_platform_data *pdata = pdev->dev.platform_data;
|
|
struct rcar_i2c_priv *priv;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
struct device *dev = &pdev->dev;
|
|
u32 bus_speed;
|
|
int ret;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(dev, "no mmio resources\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(dev, "no mem for private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bus_speed = 100000; /* default 100 kHz */
|
|
if (pdata && pdata->bus_speed)
|
|
bus_speed = pdata->bus_speed;
|
|
ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
priv->io = devm_request_and_ioremap(dev, res);
|
|
if (!priv->io) {
|
|
dev_err(dev, "cannot ioremap\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
init_waitqueue_head(&priv->wait);
|
|
spin_lock_init(&priv->lock);
|
|
|
|
adap = &priv->adap;
|
|
adap->nr = pdev->id;
|
|
adap->algo = &rcar_i2c_algo;
|
|
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
|
|
adap->retries = 3;
|
|
adap->dev.parent = dev;
|
|
i2c_set_adapdata(adap, priv);
|
|
strlcpy(adap->name, pdev->name, sizeof(adap->name));
|
|
|
|
ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0,
|
|
dev_name(dev), priv);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot get irq %d\n", priv->irq);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret < 0) {
|
|
dev_err(dev, "reg adap failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
dev_info(dev, "probed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct rcar_i2c_priv *priv = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
|
|
i2c_del_adapter(&priv->adap);
|
|
pm_runtime_disable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rcar_i2c_driver = {
|
|
.driver = {
|
|
.name = "i2c-rcar",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = rcar_i2c_probe,
|
|
.remove = rcar_i2c_remove,
|
|
};
|
|
|
|
module_platform_driver(rcar_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Renesas R-Car I2C bus driver");
|
|
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
|