linux_dsm_epyc7002/arch/arm64/include/asm/asm-uaccess.h
Catalin Marinas 6b88a32c7a arm64: kpti: Fix the interaction between ASID switching and software PAN
With ARM64_SW_TTBR0_PAN enabled, the exception entry code checks the
active ASID to decide whether user access was enabled (non-zero ASID)
when the exception was taken. On return from exception, if user access
was previously disabled, it re-instates TTBR0_EL1 from the per-thread
saved value (updated in switch_mm() or efi_set_pgd()).

Commit 7655abb953 ("arm64: mm: Move ASID from TTBR0 to TTBR1") makes a
TTBR0_EL1 + ASID switching non-atomic. Subsequently, commit 27a921e757
("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN") changes the
__uaccess_ttbr0_disable() function and asm macro to first write the
reserved TTBR0_EL1 followed by the ASID=0 update in TTBR1_EL1. If an
exception occurs between these two, the exception return code will
re-instate a valid TTBR0_EL1. Similar scenario can happen in
cpu_switch_mm() between setting the reserved TTBR0_EL1 and the ASID
update in cpu_do_switch_mm().

This patch reverts the entry.S check for ASID == 0 to TTBR0_EL1 and
disables the interrupts around the TTBR0_EL1 and ASID switching code in
__uaccess_ttbr0_disable(). It also ensures that, when returning from the
EFI runtime services, efi_set_pgd() doesn't leave a non-zero ASID in
TTBR1_EL1 by using uaccess_ttbr0_{enable,disable}.

The accesses to current_thread_info()->ttbr0 are updated to use
READ_ONCE/WRITE_ONCE.

As a safety measure, __uaccess_ttbr0_enable() always masks out any
existing non-zero ASID TTBR1_EL1 before writing in the new ASID.

Fixes: 27a921e757 ("arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN")
Acked-by: Will Deacon <will.deacon@arm.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-16 17:37:48 +00:00

88 lines
2.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_ASM_UACCESS_H
#define __ASM_ASM_UACCESS_H
#include <asm/alternative.h>
#include <asm/kernel-pgtable.h>
#include <asm/mmu.h>
#include <asm/sysreg.h>
#include <asm/assembler.h>
/*
* User access enabling/disabling macros.
*/
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
.macro __uaccess_ttbr0_disable, tmp1
mrs \tmp1, ttbr1_el1 // swapper_pg_dir
bic \tmp1, \tmp1, #TTBR_ASID_MASK
sub \tmp1, \tmp1, #RESERVED_TTBR0_SIZE // reserved_ttbr0 just before swapper_pg_dir
msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1
isb
add \tmp1, \tmp1, #RESERVED_TTBR0_SIZE
msr ttbr1_el1, \tmp1 // set reserved ASID
isb
.endm
.macro __uaccess_ttbr0_enable, tmp1, tmp2
get_thread_info \tmp1
ldr \tmp1, [\tmp1, #TSK_TI_TTBR0] // load saved TTBR0_EL1
mrs \tmp2, ttbr1_el1
extr \tmp2, \tmp2, \tmp1, #48
ror \tmp2, \tmp2, #16
msr ttbr1_el1, \tmp2 // set the active ASID
isb
msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1
isb
.endm
.macro uaccess_ttbr0_disable, tmp1, tmp2
alternative_if_not ARM64_HAS_PAN
save_and_disable_irq \tmp2 // avoid preemption
__uaccess_ttbr0_disable \tmp1
restore_irq \tmp2
alternative_else_nop_endif
.endm
.macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3
alternative_if_not ARM64_HAS_PAN
save_and_disable_irq \tmp3 // avoid preemption
__uaccess_ttbr0_enable \tmp1, \tmp2
restore_irq \tmp3
alternative_else_nop_endif
.endm
#else
.macro uaccess_ttbr0_disable, tmp1, tmp2
.endm
.macro uaccess_ttbr0_enable, tmp1, tmp2, tmp3
.endm
#endif
/*
* These macros are no-ops when UAO is present.
*/
.macro uaccess_disable_not_uao, tmp1, tmp2
uaccess_ttbr0_disable \tmp1, \tmp2
alternative_if ARM64_ALT_PAN_NOT_UAO
SET_PSTATE_PAN(1)
alternative_else_nop_endif
.endm
.macro uaccess_enable_not_uao, tmp1, tmp2, tmp3
uaccess_ttbr0_enable \tmp1, \tmp2, \tmp3
alternative_if ARM64_ALT_PAN_NOT_UAO
SET_PSTATE_PAN(0)
alternative_else_nop_endif
.endm
/*
* Remove the address tag from a virtual address, if present.
*/
.macro clear_address_tag, dst, addr
tst \addr, #(1 << 55)
bic \dst, \addr, #(0xff << 56)
csel \dst, \dst, \addr, eq
.endm
#endif