linux_dsm_epyc7002/drivers/scsi/isci/task.c
Jeff Skirvin 18d3d72a42 isci: isci_request_cleanup_completed_loiterer checks task before task_done
In the condition where outstanding I/Os are being cleaned from the device
requests in process list, the cleanup function needs to check that the
request is actually a sas-task and not a task management function.

Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 03:55:29 -07:00

1645 lines
47 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/completion.h>
#include "scic_task_request.h"
#include "scic_remote_device.h"
#include "scic_io_request.h"
#include "scic_sds_remote_device.h"
#include "scic_sds_remote_node_context.h"
#include "isci.h"
#include "request.h"
#include "sata.h"
#include "task.h"
/**
* isci_task_execute_task() - This function is one of the SAS Domain Template
* functions. This function is called by libsas to send a task down to
* hardware.
* @task: This parameter specifies the SAS task to send.
* @num: This parameter specifies the number of tasks to queue.
* @gfp_flags: This parameter specifies the context of this call.
*
* status, zero indicates success.
*/
int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags)
{
struct isci_host *isci_host;
struct isci_request *request = NULL;
struct isci_remote_device *device;
unsigned long flags;
int ret;
enum sci_status status;
dev_dbg(task->dev->port->ha->dev, "%s: num=%d\n", __func__, num);
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
isci_task_complete_for_upper_layer(
task,
SAS_TASK_UNDELIVERED,
SAM_STAT_TASK_ABORTED,
isci_perform_normal_io_completion
);
return 0; /* The I/O was accepted (and failed). */
}
if ((task->dev == NULL) || (task->dev->port == NULL)) {
/* Indicate SAS_TASK_UNDELIVERED, so that the scsi midlayer
* removes the target.
*/
isci_task_complete_for_upper_layer(
task,
SAS_TASK_UNDELIVERED,
SAS_DEVICE_UNKNOWN,
isci_perform_normal_io_completion
);
return 0; /* The I/O was accepted (and failed). */
}
isci_host = isci_host_from_sas_ha(task->dev->port->ha);
/* Check if we have room for more tasks */
ret = isci_host_can_queue(isci_host, num);
if (ret) {
dev_warn(task->dev->port->ha->dev, "%s: queue full\n", __func__);
return ret;
}
do {
dev_dbg(task->dev->port->ha->dev,
"task = %p, num = %d; dev = %p; cmd = %p\n",
task, num, task->dev, task->uldd_task);
if ((task->dev == NULL) || (task->dev->port == NULL)) {
dev_warn(task->dev->port->ha->dev,
"%s: task %p's port or dev == NULL!\n",
__func__, task);
/* Indicate SAS_TASK_UNDELIVERED, so that the scsi
* midlayer removes the target.
*/
isci_task_complete_for_upper_layer(
task,
SAS_TASK_UNDELIVERED,
SAS_DEVICE_UNKNOWN,
isci_perform_normal_io_completion
);
/* We don't have a valid host reference, so we
* can't control the host queueing condition.
*/
continue;
}
device = isci_dev_from_domain_dev(task->dev);
isci_host = isci_host_from_sas_ha(task->dev->port->ha);
if (device && device->status == isci_ready) {
/* Forces a retry from scsi mid layer. */
dev_warn(task->dev->port->ha->dev,
"%s: task %p: isci_host->status = %d, "
"device = %p\n",
__func__,
task,
isci_host_get_state(isci_host),
device);
if (device)
dev_dbg(task->dev->port->ha->dev,
"%s: device->status = 0x%x\n",
__func__, device->status);
/* Indicate QUEUE_FULL so that the scsi midlayer
* retries.
*/
isci_task_complete_for_upper_layer(
task,
SAS_TASK_COMPLETE,
SAS_QUEUE_FULL,
isci_perform_normal_io_completion
);
isci_host_can_dequeue(isci_host, 1);
}
/* the device is going down... */
else if (!device || device->status != isci_ready_for_io) {
dev_dbg(task->dev->port->ha->dev,
"%s: task %p: isci_host->status = %d, "
"device = %p\n",
__func__,
task,
isci_host_get_state(isci_host),
device);
if (device)
dev_dbg(task->dev->port->ha->dev,
"%s: device->status = 0x%x\n",
__func__, device->status);
/* Indicate SAS_TASK_UNDELIVERED, so that the scsi
* midlayer removes the target.
*/
isci_task_complete_for_upper_layer(
task,
SAS_TASK_UNDELIVERED,
SAS_DEVICE_UNKNOWN,
isci_perform_normal_io_completion
);
isci_host_can_dequeue(isci_host, 1);
} else {
/* build and send the request. */
status = isci_request_execute(isci_host, task, &request,
gfp_flags);
if (status == SCI_SUCCESS) {
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
} else {
/* Indicate QUEUE_FULL so that the scsi
* midlayer retries. if the request
* failed for remote device reasons,
* it gets returned as
* SAS_TASK_UNDELIVERED next time
* through.
*/
isci_task_complete_for_upper_layer(
task,
SAS_TASK_COMPLETE,
SAS_QUEUE_FULL,
isci_perform_normal_io_completion
);
isci_host_can_dequeue(isci_host, 1);
}
}
task = list_entry(task->list.next, struct sas_task, list);
} while (--num > 0);
return 0;
}
/**
* isci_task_request_build() - This function builds the task request object.
* @isci_host: This parameter specifies the ISCI host object
* @request: This parameter points to the isci_request object allocated in the
* request construct function.
* @tmf: This parameter is the task management struct to be built
*
* SCI_SUCCESS on successfull completion, or specific failure code.
*/
static enum sci_status isci_task_request_build(
struct isci_host *isci_host,
struct isci_request **isci_request,
struct isci_tmf *isci_tmf)
{
struct scic_sds_remote_device *sci_device;
enum sci_status status = SCI_FAILURE;
struct isci_request *request;
struct isci_remote_device *isci_device;
/* struct sci_sas_identify_address_frame_protocols dev_protocols; */
struct smp_discover_response_protocols dev_protocols;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_tmf = %p\n", __func__, isci_tmf);
isci_device = isci_tmf->device;
sci_device = to_sci_dev(isci_device);
/* do common allocation and init of request object. */
status = isci_request_alloc_tmf(
isci_host,
isci_tmf,
&request,
isci_device,
GFP_ATOMIC
);
if (status != SCI_SUCCESS)
goto out;
/* let the core do it's construct. */
status = scic_task_request_construct(
isci_host->core_controller,
sci_device,
SCI_CONTROLLER_INVALID_IO_TAG,
request,
request->sci_request_mem_ptr,
&request->sci_request_handle
);
if (status != SCI_SUCCESS) {
dev_warn(&isci_host->pdev->dev,
"%s: scic_task_request_construct failed - "
"status = 0x%x\n",
__func__,
status);
goto errout;
}
sci_object_set_association(
request->sci_request_handle,
request
);
scic_remote_device_get_protocols(
sci_device,
&dev_protocols
);
/* let the core do it's protocol
* specific construction.
*/
if (dev_protocols.u.bits.attached_ssp_target) {
isci_tmf->proto = SAS_PROTOCOL_SSP;
status = scic_task_request_construct_ssp(
request->sci_request_handle
);
if (status != SCI_SUCCESS)
goto errout;
}
if (dev_protocols.u.bits.attached_stp_target) {
isci_tmf->proto = SAS_PROTOCOL_SATA;
status = isci_sata_management_task_request_build(request);
if (status != SCI_SUCCESS)
goto errout;
}
goto out;
errout:
/* release the dma memory if we fail. */
isci_request_free(isci_host, request);
request = NULL;
out:
*isci_request = request;
return status;
}
/**
* isci_tmf_timeout_cb() - This function is called as a kernel callback when
* the timeout period for the TMF has expired.
*
*
*/
static void isci_tmf_timeout_cb(void *tmf_request_arg)
{
struct isci_request *request = (struct isci_request *)tmf_request_arg;
struct isci_tmf *tmf = isci_request_access_tmf(request);
enum sci_status status;
BUG_ON(request->ttype != tmf_task);
/* This task management request has timed-out. Terminate the request
* so that the request eventually completes to the requestor in the
* request completion callback path.
*/
/* Note - the timer callback function itself has provided spinlock
* exclusion from the start and completion paths. No need to take
* the request->isci_host->scic_lock here.
*/
if (tmf->timeout_timer != NULL) {
/* Call the users callback, if any. */
if (tmf->cb_state_func != NULL)
tmf->cb_state_func(isci_tmf_timed_out, tmf,
tmf->cb_data);
/* Terminate the TMF transmit request. */
status = scic_controller_terminate_request(
request->isci_host->core_controller,
to_sci_dev(request->isci_device),
request->sci_request_handle
);
dev_dbg(&request->isci_host->pdev->dev,
"%s: tmf_request = %p; tmf = %p; status = %d\n",
__func__, request, tmf, status);
} else
dev_dbg(&request->isci_host->pdev->dev,
"%s: timer already canceled! "
"tmf_request = %p; tmf = %p\n",
__func__, request, tmf);
/* No need to unlock since the caller to this callback is doing it for
* us.
* request->isci_host->scic_lock
*/
}
/**
* isci_task_execute_tmf() - This function builds and sends a task request,
* then waits for the completion.
* @isci_host: This parameter specifies the ISCI host object
* @tmf: This parameter is the pointer to the task management structure for
* this request.
* @timeout_ms: This parameter specifies the timeout period for the task
* management request.
*
* TMF_RESP_FUNC_COMPLETE on successful completion of the TMF (this includes
* error conditions reported in the IU status), or TMF_RESP_FUNC_FAILED.
*/
int isci_task_execute_tmf(
struct isci_host *isci_host,
struct isci_tmf *tmf,
unsigned long timeout_ms)
{
DECLARE_COMPLETION_ONSTACK(completion);
enum sci_status status = SCI_FAILURE;
struct scic_sds_remote_device *sci_device;
struct isci_remote_device *isci_device = tmf->device;
struct isci_request *request;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
/* sanity check, return TMF_RESP_FUNC_FAILED
* if the device is not there and ready.
*/
if (!isci_device || isci_device->status != isci_ready_for_io) {
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p not ready (%d)\n",
__func__,
isci_device, isci_device->status);
return TMF_RESP_FUNC_FAILED;
} else
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p\n",
__func__, isci_device);
sci_device = to_sci_dev(isci_device);
/* Assign the pointer to the TMF's completion kernel wait structure. */
tmf->complete = &completion;
isci_task_request_build(
isci_host,
&request,
tmf
);
if (!request) {
dev_warn(&isci_host->pdev->dev,
"%s: isci_task_request_build failed\n",
__func__);
return TMF_RESP_FUNC_FAILED;
}
/* Allocate the TMF timeout timer. */
spin_lock_irqsave(&isci_host->scic_lock, flags);
tmf->timeout_timer = isci_timer_create(isci_host, request, isci_tmf_timeout_cb);
/* Start the timer. */
if (tmf->timeout_timer)
isci_timer_start(tmf->timeout_timer, timeout_ms);
else
dev_warn(&isci_host->pdev->dev,
"%s: isci_timer_create failed!!!!\n",
__func__);
/* start the TMF io. */
status = scic_controller_start_task(
isci_host->core_controller,
sci_device,
request->sci_request_handle,
SCI_CONTROLLER_INVALID_IO_TAG
);
if (status != SCI_SUCCESS) {
dev_warn(&isci_host->pdev->dev,
"%s: start_io failed - status = 0x%x, request = %p\n",
__func__,
status,
request);
goto cleanup_request;
}
/* Call the users callback, if any. */
if (tmf->cb_state_func != NULL)
tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data);
/* Change the state of the TMF-bearing request to "started". */
isci_request_change_state(request, started);
/* add the request to the remote device request list. */
list_add(&request->dev_node, &isci_device->reqs_in_process);
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
/* Wait for the TMF to complete, or a timeout. */
wait_for_completion(&completion);
isci_print_tmf(tmf);
if (tmf->status == SCI_SUCCESS)
ret = TMF_RESP_FUNC_COMPLETE;
else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) {
dev_dbg(&isci_host->pdev->dev,
"%s: tmf.status == "
"SCI_FAILURE_IO_RESPONSE_VALID\n",
__func__);
ret = TMF_RESP_FUNC_COMPLETE;
}
/* Else - leave the default "failed" status alone. */
dev_dbg(&isci_host->pdev->dev,
"%s: completed request = %p\n",
__func__,
request);
if (request->io_request_completion != NULL) {
/* The fact that this is non-NULL for a TMF request
* means there is a thread waiting for this TMF to
* finish.
*/
complete(request->io_request_completion);
}
spin_lock_irqsave(&isci_host->scic_lock, flags);
cleanup_request:
/* Clean up the timer if needed. */
if (tmf->timeout_timer) {
isci_del_timer(isci_host, tmf->timeout_timer);
tmf->timeout_timer = NULL;
}
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
isci_request_free(isci_host, request);
return ret;
}
void isci_task_build_tmf(
struct isci_tmf *tmf,
struct isci_remote_device *isci_device,
enum isci_tmf_function_codes code,
void (*tmf_sent_cb)(enum isci_tmf_cb_state,
struct isci_tmf *,
void *),
void *cb_data)
{
dev_dbg(&isci_device->isci_port->isci_host->pdev->dev,
"%s: isci_device = %p\n", __func__, isci_device);
memset(tmf, 0, sizeof(*tmf));
tmf->device = isci_device;
tmf->tmf_code = code;
tmf->timeout_timer = NULL;
tmf->cb_state_func = tmf_sent_cb;
tmf->cb_data = cb_data;
}
static struct isci_request *isci_task_get_request_from_task(
struct sas_task *task,
struct isci_host **isci_host,
struct isci_remote_device **isci_device)
{
struct isci_request *request = NULL;
unsigned long flags;
spin_lock_irqsave(&task->task_state_lock, flags);
request = task->lldd_task;
/* If task is already done, the request isn't valid */
if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&
(task->task_state_flags & SAS_TASK_AT_INITIATOR) &&
(request != NULL)) {
if (isci_host != NULL)
*isci_host = request->isci_host;
if (isci_device != NULL)
*isci_device = request->isci_device;
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
return request;
}
/**
* isci_task_validate_request_to_abort() - This function checks the given I/O
* against the "started" state. If the request is still "started", it's
* state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD
* BEFORE CALLING THIS FUNCTION.
* @isci_request: This parameter specifies the request object to control.
* @isci_host: This parameter specifies the ISCI host object
* @isci_device: This is the device to which the request is pending.
* @aborted_io_completion: This is a completion structure that will be added to
* the request in case it is changed to aborting; this completion is
* triggered when the request is fully completed.
*
* Either "started" on successful change of the task status to "aborted", or
* "unallocated" if the task cannot be controlled.
*/
static enum isci_request_status isci_task_validate_request_to_abort(
struct isci_request *isci_request,
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
struct completion *aborted_io_completion)
{
enum isci_request_status old_state = unallocated;
/* Only abort the task if it's in the
* device's request_in_process list
*/
if (isci_request && !list_empty(&isci_request->dev_node)) {
old_state = isci_request_change_started_to_aborted(
isci_request, aborted_io_completion);
/* Only abort requests in the started state. */
if (old_state != started)
old_state = unallocated;
}
return old_state;
}
static void isci_request_cleanup_completed_loiterer(
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
struct isci_request *isci_request)
{
struct sas_task *task;
unsigned long flags;
task = (isci_request->ttype == io_task)
? isci_request_access_task(isci_request)
: NULL;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device=%p, request=%p, task=%p\n",
__func__, isci_device, isci_request, task);
spin_lock_irqsave(&isci_host->scic_lock, flags);
list_del_init(&isci_request->dev_node);
if (task != NULL)
task->lldd_task = NULL;
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
isci_request_free(isci_host, isci_request);
}
/**
* isci_terminate_request_core() - This function will terminate the given
* request, and wait for it to complete. This function must only be called
* from a thread that can wait. Note that the request is terminated and
* completed (back to the host, if started there).
* @isci_host: This SCU.
* @isci_device: The target.
* @isci_request: The I/O request to be terminated.
*
*
*/
static void isci_terminate_request_core(
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
struct isci_request *isci_request,
struct completion *request_completion)
{
enum sci_status status = SCI_SUCCESS;
bool was_terminated = false;
bool needs_cleanup_handling = false;
enum isci_request_status request_status;
unsigned long flags;
dev_dbg(&isci_host->pdev->dev,
"%s: device = %p; request = %p\n",
__func__, isci_device, isci_request);
/* Peek at the current status of the request. This will tell
* us if there was special handling on the request such that it
* needs to be detached and freed here.
*/
spin_lock_irqsave(&isci_request->state_lock, flags);
request_status = isci_request_get_state(isci_request);
/* TMFs are in their own thread */
if ((isci_request->ttype == io_task) &&
((request_status == aborted) ||
(request_status == aborting) ||
(request_status == terminating)))
/* The completion routine won't free a request in
* the aborted/aborting/terminating state, so we do
* it here.
*/
needs_cleanup_handling = true;
spin_unlock_irqrestore(&isci_request->state_lock, flags);
spin_lock_irqsave(&isci_host->scic_lock, flags);
/* Make sure the request wasn't just sitting around signalling
* device condition (if the request handle is NULL, then the
* request completed but needed additional handling here).
*/
if (isci_request->sci_request_handle != NULL) {
was_terminated = true;
status = scic_controller_terminate_request(
isci_host->core_controller,
to_sci_dev(isci_device),
isci_request->sci_request_handle
);
}
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
/*
* The only time the request to terminate will
* fail is when the io request is completed and
* being aborted.
*/
if (status != SCI_SUCCESS)
dev_err(&isci_host->pdev->dev,
"%s: scic_controller_terminate_request"
" returned = 0x%x\n",
__func__,
status);
else {
if (was_terminated) {
dev_dbg(&isci_host->pdev->dev,
"%s: before completion wait (%p)\n",
__func__,
request_completion);
/* Wait here for the request to complete. */
wait_for_completion(request_completion);
dev_dbg(&isci_host->pdev->dev,
"%s: after completion wait (%p)\n",
__func__,
request_completion);
}
if (needs_cleanup_handling)
isci_request_cleanup_completed_loiterer(
isci_host, isci_device, isci_request
);
}
}
static void isci_terminate_request(
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
struct isci_request *isci_request,
enum isci_request_status new_request_state)
{
enum isci_request_status old_state;
DECLARE_COMPLETION_ONSTACK(request_completion);
unsigned long flags;
spin_lock_irqsave(&isci_host->scic_lock, flags);
/* Change state to "new_request_state" if it is currently "started" */
old_state = isci_request_change_started_to_newstate(
isci_request,
&request_completion,
new_request_state
);
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
if (old_state == started)
/* This request was not already being aborted. If it had been,
* then the aborting I/O (ie. the TMF request) would not be in
* the aborting state, and thus would be terminated here. Note
* that since the TMF completion's call to the kernel function
* "complete()" does not happen until the pending I/O request
* terminate fully completes, we do not have to implement a
* special wait here for already aborting requests - the
* termination of the TMF request will force the request
* to finish it's already started terminate.
*/
isci_terminate_request_core(isci_host, isci_device,
isci_request, &request_completion);
}
/**
* isci_terminate_pending_requests() - This function will change the all of the
* requests on the given device's state to "aborting", will terminate the
* requests, and wait for them to complete. This function must only be
* called from a thread that can wait. Note that the requests are all
* terminated and completed (back to the host, if started there).
* @isci_host: This parameter specifies SCU.
* @isci_device: This parameter specifies the target.
*
*
*/
void isci_terminate_pending_requests(
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
enum isci_request_status new_request_state)
{
struct isci_request *isci_request;
struct sas_task *task;
bool done = false;
unsigned long flags;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p (new request state = %d)\n",
__func__, isci_device, new_request_state);
#define ISCI_TERMINATE_SHOW_PENDING_REQUESTS
#ifdef ISCI_TERMINATE_SHOW_PENDING_REQUESTS
{
struct isci_request *request;
/* Only abort the task if it's in the
* device's request_in_process list
*/
list_for_each_entry(request,
&isci_device->reqs_in_process,
dev_node)
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p; request is on "
"reqs_in_process list: %p\n",
__func__, isci_device, request);
}
#endif /* ISCI_TERMINATE_SHOW_PENDING_REQUESTS */
/* Clean up all pending requests. */
do {
spin_lock_irqsave(&isci_host->scic_lock, flags);
if (list_empty(&isci_device->reqs_in_process)) {
done = true;
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p; done.\n",
__func__, isci_device);
} else {
/* The list was not empty - grab the first request. */
isci_request = list_first_entry(
&isci_device->reqs_in_process,
struct isci_request, dev_node
);
/* Note that we are not expecting to have to control
* the target to abort the request.
*/
isci_request->complete_in_target = true;
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
/* Get the libsas task reference. */
task = isci_request_access_task(isci_request);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device=%p request=%p; task=%p\n",
__func__, isci_device, isci_request, task);
/* Mark all still pending I/O with the selected next
* state.
*/
isci_terminate_request(isci_host, isci_device,
isci_request, new_request_state
);
/* Set the 'done' state on the task. */
if (task)
isci_task_all_done(task);
}
} while (!done);
}
/**
* isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain
* Template functions.
* @lun: This parameter specifies the lun to be reset.
*
* status, zero indicates success.
*/
static int isci_task_send_lu_reset_sas(
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
u8 *lun)
{
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p, isci_device = %p\n",
__func__, isci_host, isci_device);
/* Send the LUN reset to the target. By the time the call returns,
* the TMF has fully exected in the target (in which case the return
* value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or
* was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED").
*/
isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_lun_reset, NULL,
NULL);
#define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */
ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_LU_RESET_TIMEOUT_MS);
if (ret == TMF_RESP_FUNC_COMPLETE)
dev_dbg(&isci_host->pdev->dev,
"%s: %p: TMF_LU_RESET passed\n",
__func__, isci_device);
else
dev_dbg(&isci_host->pdev->dev,
"%s: %p: TMF_LU_RESET failed (%x)\n",
__func__, isci_device, ret);
return ret;
}
/**
* isci_task_lu_reset() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas,
* to reset the given lun. Note the assumption that while this call is
* executing, no I/O will be sent by the host to the device.
* @lun: This parameter specifies the lun to be reset.
*
* status, zero indicates success.
*/
int isci_task_lu_reset(
struct domain_device *domain_device,
u8 *lun)
{
struct isci_host *isci_host = NULL;
struct isci_remote_device *isci_device = NULL;
int ret;
bool device_stopping = false;
if (domain_device == NULL) {
pr_warn("%s: domain_device == NULL\n", __func__);
return TMF_RESP_FUNC_FAILED;
}
isci_device = isci_dev_from_domain_dev(domain_device);
if (domain_device->port != NULL)
isci_host = isci_host_from_sas_ha(domain_device->port->ha);
pr_debug("%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
__func__, domain_device, isci_host, isci_device);
if (isci_device != NULL)
device_stopping = (isci_device->status == isci_stopping)
|| (isci_device->status == isci_stopped);
/* If there is a device reset pending on any request in the
* device's list, fail this LUN reset request in order to
* escalate to the device reset.
*/
if ((isci_device == NULL) ||
(isci_host == NULL) ||
((isci_host != NULL) &&
(isci_device != NULL) &&
(device_stopping ||
(isci_device_is_reset_pending(isci_host, isci_device))))) {
dev_warn(&isci_host->pdev->dev,
"%s: No dev (%p), no host (%p), or "
"RESET PENDING: domain_device=%p\n",
__func__, isci_device, isci_host, domain_device);
return TMF_RESP_FUNC_FAILED;
}
/* Send the task management part of the reset. */
if (sas_protocol_ata(domain_device->tproto)) {
ret = isci_task_send_lu_reset_sata(
isci_host, isci_device, lun
);
} else
ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun);
/* If the LUN reset worked, all the I/O can now be terminated. */
if (ret == TMF_RESP_FUNC_COMPLETE)
/* Terminate all I/O now. */
isci_terminate_pending_requests(isci_host,
isci_device,
terminating);
return ret;
}
/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */
int isci_task_clear_nexus_port(struct asd_sas_port *port)
{
return TMF_RESP_FUNC_FAILED;
}
int isci_task_clear_nexus_ha(struct sas_ha_struct *ha)
{
return TMF_RESP_FUNC_FAILED;
}
int isci_task_I_T_nexus_reset(struct domain_device *dev)
{
return TMF_RESP_FUNC_FAILED;
}
/* Task Management Functions. Must be called from process context. */
/**
* isci_abort_task_process_cb() - This is a helper function for the abort task
* TMF command. It manages the request state with respect to the successful
* transmission / completion of the abort task request.
* @cb_state: This parameter specifies when this function was called - after
* the TMF request has been started and after it has timed-out.
* @tmf: This parameter specifies the TMF in progress.
*
*
*/
static void isci_abort_task_process_cb(
enum isci_tmf_cb_state cb_state,
struct isci_tmf *tmf,
void *cb_data)
{
struct isci_request *old_request;
old_request = (struct isci_request *)cb_data;
dev_dbg(&old_request->isci_host->pdev->dev,
"%s: tmf=%p, old_request=%p\n",
__func__, tmf, old_request);
switch (cb_state) {
case isci_tmf_started:
/* The TMF has been started. Nothing to do here, since the
* request state was already set to "aborted" by the abort
* task function.
*/
BUG_ON(old_request->status != aborted);
break;
case isci_tmf_timed_out:
/* Set the task's state to "aborting", since the abort task
* function thread set it to "aborted" (above) in anticipation
* of the task management request working correctly. Since the
* timeout has now fired, the TMF request failed. We set the
* state such that the request completion will indicate the
* device is no longer present.
*/
isci_request_change_state(old_request, aborting);
break;
default:
dev_err(&old_request->isci_host->pdev->dev,
"%s: Bad cb_state (%d): tmf=%p, old_request=%p\n",
__func__, cb_state, tmf, old_request);
break;
}
}
/**
* isci_task_abort_task() - This function is one of the SAS Domain Template
* functions. This function is called by libsas to abort a specified task.
* @task: This parameter specifies the SAS task to abort.
*
* status, zero indicates success.
*/
int isci_task_abort_task(struct sas_task *task)
{
DECLARE_COMPLETION_ONSTACK(aborted_io_completion);
struct isci_request *old_request = NULL;
struct isci_remote_device *isci_device = NULL;
struct isci_host *isci_host = NULL;
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
bool any_dev_reset, device_stopping;
/* Get the isci_request reference from the task. Note that
* this check does not depend on the pending request list
* in the device, because tasks driving resets may land here
* after completion in the core.
*/
old_request = isci_task_get_request_from_task(task, &isci_host,
&isci_device);
dev_dbg(&isci_host->pdev->dev,
"%s: task = %p\n", __func__, task);
/* Check if the device has been / is currently being removed.
* If so, no task management will be done, and the I/O will
* be terminated.
*/
device_stopping = (isci_device->status == isci_stopping)
|| (isci_device->status == isci_stopped);
#ifdef NOMORE
/* This abort task function is the first stop of the libsas error
* handler thread. Since libsas is executing in a thread with a
* referernce to the "task" parameter, that task cannot be completed
* directly back to the upper layers. In order to make sure that
* the task is managed correctly if this abort task fails, set the
* "SAS_TASK_STATE_ABORTED" bit now such that completions up the
* stack will be intercepted and only allowed to happen in the
* libsas SCSI error handler thread.
*/
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
spin_unlock_irqrestore(&task->task_state_lock, flags);
#endif /* NOMORE */
/* This version of the driver will fail abort requests for
* SATA/STP. Failing the abort request this way will cause the
* SCSI error handler thread to escalate to LUN reset
*/
if (sas_protocol_ata(task->task_proto) && !device_stopping) {
dev_warn(&isci_host->pdev->dev,
" task %p is for a STP/SATA device;"
" returning TMF_RESP_FUNC_FAILED\n"
" to cause a LUN reset...\n", task);
return TMF_RESP_FUNC_FAILED;
}
dev_dbg(&isci_host->pdev->dev,
"%s: old_request == %p\n", __func__, old_request);
spin_lock_irqsave(&task->task_state_lock, flags);
/* Don't do resets to stopping devices. */
if (device_stopping)
task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
/* See if there is a pending device reset for this device. */
any_dev_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
spin_unlock_irqrestore(&task->task_state_lock, flags);
if ((isci_device != NULL) && !device_stopping)
any_dev_reset = any_dev_reset
|| isci_device_is_reset_pending(isci_host,
isci_device
);
/* If the extraction of the request reference from the task
* failed, then the request has been completed (or if there is a
* pending reset then this abort request function must be failed
* in order to escalate to the target reset).
*/
if ((old_request == NULL) ||
((old_request != NULL) &&
(old_request->sci_request_handle == NULL) &&
(old_request->complete_in_target)) ||
any_dev_reset) {
spin_lock_irqsave(&task->task_state_lock, flags);
/* If the device reset task flag is set, fail the task
* management request. Otherwise, the original request
* has completed.
*/
if (any_dev_reset) {
/* Turn off the task's DONE to make sure this
* task is escalated to a target reset.
*/
task->task_state_flags &= ~SAS_TASK_STATE_DONE;
/* Fail the task management request in order to
* escalate to the target reset.
*/
ret = TMF_RESP_FUNC_FAILED;
dev_dbg(&isci_host->pdev->dev,
"%s: Failing task abort in order to "
"escalate to target reset because\n"
"SAS_TASK_NEED_DEV_RESET is set for "
"task %p on dev %p\n",
__func__, task, isci_device);
} else {
ret = TMF_RESP_FUNC_COMPLETE;
dev_dbg(&isci_host->pdev->dev,
"%s: abort task not needed for %p\n",
__func__, task);
/* The request has already completed and there
* is nothing to do here other than to set the task
* done bit, and indicate that the task abort function
* was sucessful.
*/
isci_set_task_doneflags(task);
/* Set the abort bit to make sure that libsas sticks the
* task in the completed task queue.
*/
/* task->task_state_flags |= SAS_TASK_STATE_ABORTED; */
/* Check for the situation where the request was
* left around on the device list but the
* request already completed.
*/
if (old_request && !old_request->sci_request_handle) {
isci_request_cleanup_completed_loiterer(
isci_host, isci_device, old_request
);
}
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
return ret;
}
spin_lock_irqsave(&isci_host->scic_lock, flags);
/* Sanity check the request status, and set the I/O kernel completion
* struct that will be triggered when the request completes.
*/
if (isci_task_validate_request_to_abort(
old_request,
isci_host,
isci_device,
&aborted_io_completion)
== unallocated) {
dev_dbg(&isci_host->pdev->dev,
"%s: old_request not valid for device = %p\n",
__func__,
isci_device);
old_request = NULL;
}
if (!old_request) {
/* There is no isci_request attached to the sas_task.
* It must have been completed and detached.
*/
dev_dbg(&isci_host->pdev->dev,
"%s: old_request == NULL\n",
__func__);
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
/* Set the state on the task. */
isci_task_all_done(task);
return TMF_RESP_FUNC_COMPLETE;
}
if (task->task_proto == SAS_PROTOCOL_SMP || device_stopping) {
if (device_stopping)
dev_dbg(&isci_host->pdev->dev,
"%s: device is stopping, thus no TMF\n",
__func__);
else
dev_dbg(&isci_host->pdev->dev,
"%s: request is SMP, thus no TMF\n",
__func__);
old_request->complete_in_target = true;
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
/* Set the state on the task. */
isci_task_all_done(task);
ret = TMF_RESP_FUNC_COMPLETE;
/* Stopping and SMP devices are not sent a TMF, and are not
* reset, but the outstanding I/O request is terminated here.
*
* Clean up the request on our side, and wait for the aborted
* I/O to complete.
*/
isci_terminate_request_core(isci_host, isci_device, old_request,
&aborted_io_completion);
} else {
/* Fill in the tmf stucture */
isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_task_abort,
isci_abort_task_process_cb, old_request);
tmf.io_tag = scic_io_request_get_io_tag(
old_request->sci_request_handle
);
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
#define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
ret = isci_task_execute_tmf(isci_host, &tmf,
ISCI_ABORT_TASK_TIMEOUT_MS);
if (ret == TMF_RESP_FUNC_COMPLETE) {
old_request->complete_in_target = true;
/* Clean up the request on our side, and wait for the aborted I/O to
* complete.
*/
isci_terminate_request_core(isci_host, isci_device, old_request,
&aborted_io_completion);
/* Set the state on the task. */
isci_task_all_done(task);
} else
dev_err(&isci_host->pdev->dev,
"%s: isci_task_send_tmf failed\n",
__func__);
}
return ret;
}
/**
* isci_task_abort_task_set() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas,
* to abort all task for the given lun.
* @d_device: This parameter specifies the domain device associated with this
* request.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_abort_task_set(
struct domain_device *d_device,
u8 *lun)
{
return TMF_RESP_FUNC_FAILED;
}
/**
* isci_task_clear_aca() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas.
* @d_device: This parameter specifies the domain device associated with this
* request.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_clear_aca(
struct domain_device *d_device,
u8 *lun)
{
return TMF_RESP_FUNC_FAILED;
}
/**
* isci_task_clear_task_set() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas.
* @d_device: This parameter specifies the domain device associated with this
* request.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_clear_task_set(
struct domain_device *d_device,
u8 *lun)
{
return TMF_RESP_FUNC_FAILED;
}
/**
* isci_task_query_task() - This function is implemented to cause libsas to
* correctly escalate the failed abort to a LUN or target reset (this is
* because sas_scsi_find_task libsas function does not correctly interpret
* all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is
* returned, libsas turns this into a LUN reset; when FUNC_FAILED is
* returned, libsas will turn this into a target reset
* @task: This parameter specifies the sas task being queried.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_query_task(
struct sas_task *task)
{
/* See if there is a pending device reset for this device. */
if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
return TMF_RESP_FUNC_FAILED;
else
return TMF_RESP_FUNC_SUCC;
}
/**
* isci_task_request_complete() - This function is called by the sci core when
* an task request completes.
* @isci_host: This parameter specifies the ISCI host object
* @request: This parameter is the completed isci_request object.
* @completion_status: This parameter specifies the completion status from the
* sci core.
*
* none.
*/
void isci_task_request_complete(
struct isci_host *isci_host,
struct isci_request *request,
enum sci_task_status completion_status)
{
struct isci_remote_device *isci_device = request->isci_device;
enum isci_request_status old_state;
struct isci_tmf *tmf = isci_request_access_tmf(request);
struct completion *tmf_complete;
dev_dbg(&isci_host->pdev->dev,
"%s: request = %p, status=%d\n",
__func__, request, completion_status);
old_state = isci_request_change_state(request, completed);
tmf->status = completion_status;
request->complete_in_target = true;
if (SAS_PROTOCOL_SSP == tmf->proto) {
memcpy(&tmf->resp.resp_iu,
scic_io_request_get_response_iu_address(
request->sci_request_handle
),
sizeof(struct sci_ssp_response_iu));
} else if (SAS_PROTOCOL_SATA == tmf->proto) {
memcpy(&tmf->resp.d2h_fis,
scic_stp_io_request_get_d2h_reg_address(
request->sci_request_handle
),
sizeof(struct sata_fis_reg_d2h)
);
}
/* Manage the timer if it is still running. */
if (tmf->timeout_timer) {
isci_del_timer(isci_host, tmf->timeout_timer);
tmf->timeout_timer = NULL;
}
/* PRINT_TMF( ((struct isci_tmf *)request->task)); */
tmf_complete = tmf->complete;
scic_controller_complete_task(
isci_host->core_controller,
to_sci_dev(isci_device),
request->sci_request_handle
);
/* NULL the request handle to make sure it cannot be terminated
* or completed again.
*/
request->sci_request_handle = NULL;
isci_request_change_state(request, unallocated);
list_del_init(&request->dev_node);
/* The task management part completes last. */
complete(tmf_complete);
}
/**
* isci_task_ssp_request_get_lun() - This function is called by the sci core to
* retrieve the lun for a given task request.
* @request: This parameter is the isci_request object.
*
* lun for specified task request.
*/
u32 isci_task_ssp_request_get_lun(struct isci_request *request)
{
struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
dev_dbg(&request->isci_host->pdev->dev,
"%s: lun = %d\n", __func__, isci_tmf->lun[0]);
/* @todo: build lun from array of bytes to 32 bit */
return isci_tmf->lun[0];
}
/**
* isci_task_ssp_request_get_function() - This function is called by the sci
* core to retrieve the function for a given task request.
* @request: This parameter is the isci_request object.
*
* function code for specified task request.
*/
u8 isci_task_ssp_request_get_function(struct isci_request *request)
{
struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
dev_dbg(&request->isci_host->pdev->dev,
"%s: func = %d\n", __func__, isci_tmf->tmf_code);
return isci_tmf->tmf_code;
}
/**
* isci_task_ssp_request_get_io_tag_to_manage() - This function is called by
* the sci core to retrieve the io tag for a given task request.
* @request: This parameter is the isci_request object.
*
* io tag for specified task request.
*/
u16 isci_task_ssp_request_get_io_tag_to_manage(struct isci_request *request)
{
u16 io_tag = SCI_CONTROLLER_INVALID_IO_TAG;
if (tmf_task == request->ttype) {
struct isci_tmf *tmf = isci_request_access_tmf(request);
io_tag = tmf->io_tag;
}
dev_dbg(&request->isci_host->pdev->dev,
"%s: request = %p, io_tag = %d\n",
__func__, request, io_tag);
return io_tag;
}
/**
* isci_task_ssp_request_get_response_data_address() - This function is called
* by the sci core to retrieve the response data address for a given task
* request.
* @request: This parameter is the isci_request object.
*
* response data address for specified task request.
*/
void *isci_task_ssp_request_get_response_data_address(
struct isci_request *request)
{
struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
return &isci_tmf->resp.resp_iu;
}
/**
* isci_task_ssp_request_get_response_data_length() - This function is called
* by the sci core to retrieve the response data length for a given task
* request.
* @request: This parameter is the isci_request object.
*
* response data length for specified task request.
*/
u32 isci_task_ssp_request_get_response_data_length(
struct isci_request *request)
{
struct isci_tmf *isci_tmf = isci_request_access_tmf(request);
return sizeof(isci_tmf->resp.resp_iu);
}
/**
* isci_bus_reset_handler() - This function performs a target reset of the
* device referenced by "cmd'. This function is exported through the
* "struct scsi_host_template" structure such that it is called when an I/O
* recovery process has escalated to a target reset. Note that this function
* is called from the scsi error handler event thread, so may block on calls.
* @scsi_cmd: This parameter specifies the target to be reset.
*
* SUCCESS if the reset process was successful, else FAILED.
*/
int isci_bus_reset_handler(struct scsi_cmnd *cmd)
{
unsigned long flags = 0;
struct isci_host *isci_host = NULL;
enum sci_status status;
int base_status;
struct isci_remote_device *isci_dev
= isci_dev_from_domain_dev(
sdev_to_domain_dev(cmd->device));
dev_dbg(&cmd->device->sdev_gendev,
"%s: cmd %p, isci_dev %p\n",
__func__, cmd, isci_dev);
if (!isci_dev) {
dev_warn(&cmd->device->sdev_gendev,
"%s: isci_dev is GONE!\n",
__func__);
return TMF_RESP_FUNC_COMPLETE; /* Nothing to reset. */
}
if (isci_dev->isci_port != NULL)
isci_host = isci_dev->isci_port->isci_host;
if (isci_host != NULL)
spin_lock_irqsave(&isci_host->scic_lock, flags);
status = scic_remote_device_reset(to_sci_dev(isci_dev));
if (status != SCI_SUCCESS) {
if (isci_host != NULL)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
scmd_printk(KERN_WARNING, cmd,
"%s: scic_remote_device_reset(%p) returned %d!\n",
__func__, isci_dev, status);
return TMF_RESP_FUNC_FAILED;
}
if (isci_host != NULL)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
/* Make sure all pending requests are able to be fully terminated. */
isci_device_clear_reset_pending(isci_dev);
/* Terminate in-progress I/O now. */
isci_remote_device_nuke_requests(isci_dev);
/* Call into the libsas default handler (which calls sas_phy_reset). */
base_status = sas_eh_bus_reset_handler(cmd);
if (base_status != SUCCESS) {
/* There can be cases where the resets to individual devices
* behind an expander will fail because of an unplug of the
* expander itself.
*/
scmd_printk(KERN_WARNING, cmd,
"%s: sas_eh_bus_reset_handler(%p) returned %d!\n",
__func__, cmd, base_status);
}
/* WHAT TO DO HERE IF sas_phy_reset FAILS? */
if (isci_host != NULL)
spin_lock_irqsave(&isci_host->scic_lock, flags);
status = scic_remote_device_reset_complete(to_sci_dev(isci_dev));
if (isci_host != NULL)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
if (status != SCI_SUCCESS) {
scmd_printk(KERN_WARNING, cmd,
"%s: scic_remote_device_reset_complete(%p) "
"returned %d!\n",
__func__, isci_dev, status);
}
/* WHAT TO DO HERE IF scic_remote_device_reset_complete FAILS? */
dev_dbg(&cmd->device->sdev_gendev,
"%s: cmd %p, isci_dev %p complete.\n",
__func__, cmd, isci_dev);
return TMF_RESP_FUNC_COMPLETE;
}