linux_dsm_epyc7002/arch/x86/realmode/init.c
Andy Lutomirski 18bc7bd523 x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly
The initialization process for trampoline_cr4_features and
mmu_cr4_features was confusing.  The intent is for mmu_cr4_features
and *trampoline_cr4_features to stay in sync, but
trampoline_cr4_features is NULL until setup_real_mode() runs.  The
old code synchronized *trampoline_cr4_features *twice*, once in
setup_real_mode() and once in setup_arch().  It also initialized
mmu_cr4_features in setup_real_mode(), which causes the actual value
of mmu_cr4_features to potentially depend on when setup_real_mode()
is called.

With this patch, mmu_cr4_features is initialized directly in
setup_arch(), and *trampoline_cr4_features is synchronized to
mmu_cr4_features when the trampoline is set up.

After this patch, it should be safe to defer setup_real_mode().

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d48a263f9912389b957dd495a7127b009259ffe0.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11 11:15:00 +02:00

127 lines
3.4 KiB
C

#include <linux/io.h>
#include <linux/memblock.h>
#include <asm/cacheflush.h>
#include <asm/pgtable.h>
#include <asm/realmode.h>
#include <asm/tlbflush.h>
struct real_mode_header *real_mode_header;
u32 *trampoline_cr4_features;
/* Hold the pgd entry used on booting additional CPUs */
pgd_t trampoline_pgd_entry;
void __init reserve_real_mode(void)
{
phys_addr_t mem;
unsigned char *base;
size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob);
/* Has to be under 1M so we can execute real-mode AP code. */
mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
if (!mem)
panic("Cannot allocate trampoline\n");
base = __va(mem);
memblock_reserve(mem, size);
real_mode_header = (struct real_mode_header *) base;
printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
base, (unsigned long long)mem, size);
}
void __init setup_real_mode(void)
{
u16 real_mode_seg;
const u32 *rel;
u32 count;
unsigned char *base;
unsigned long phys_base;
struct trampoline_header *trampoline_header;
size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob);
#ifdef CONFIG_X86_64
u64 *trampoline_pgd;
u64 efer;
#endif
base = (unsigned char *)real_mode_header;
memcpy(base, real_mode_blob, size);
phys_base = __pa(base);
real_mode_seg = phys_base >> 4;
rel = (u32 *) real_mode_relocs;
/* 16-bit segment relocations. */
count = *rel++;
while (count--) {
u16 *seg = (u16 *) (base + *rel++);
*seg = real_mode_seg;
}
/* 32-bit linear relocations. */
count = *rel++;
while (count--) {
u32 *ptr = (u32 *) (base + *rel++);
*ptr += phys_base;
}
/* Must be perfomed *after* relocation. */
trampoline_header = (struct trampoline_header *)
__va(real_mode_header->trampoline_header);
#ifdef CONFIG_X86_32
trampoline_header->start = __pa_symbol(startup_32_smp);
trampoline_header->gdt_limit = __BOOT_DS + 7;
trampoline_header->gdt_base = __pa_symbol(boot_gdt);
#else
/*
* Some AMD processors will #GP(0) if EFER.LMA is set in WRMSR
* so we need to mask it out.
*/
rdmsrl(MSR_EFER, efer);
trampoline_header->efer = efer & ~EFER_LMA;
trampoline_header->start = (u64) secondary_startup_64;
trampoline_cr4_features = &trampoline_header->cr4;
*trampoline_cr4_features = mmu_cr4_features;
trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
trampoline_pgd[0] = trampoline_pgd_entry.pgd;
trampoline_pgd[511] = init_level4_pgt[511].pgd;
#endif
}
/*
* reserve_real_mode() gets called very early, to guarantee the
* availability of low memory. This is before the proper kernel page
* tables are set up, so we cannot set page permissions in that
* function. Also trampoline code will be executed by APs so we
* need to mark it executable at do_pre_smp_initcalls() at least,
* thus run it as a early_initcall().
*/
static int __init set_real_mode_permissions(void)
{
unsigned char *base = (unsigned char *) real_mode_header;
size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob);
size_t ro_size =
PAGE_ALIGN(real_mode_header->ro_end) -
__pa(base);
size_t text_size =
PAGE_ALIGN(real_mode_header->ro_end) -
real_mode_header->text_start;
unsigned long text_start =
(unsigned long) __va(real_mode_header->text_start);
set_memory_nx((unsigned long) base, size >> PAGE_SHIFT);
set_memory_ro((unsigned long) base, ro_size >> PAGE_SHIFT);
set_memory_x((unsigned long) text_start, text_size >> PAGE_SHIFT);
return 0;
}
early_initcall(set_real_mode_permissions);