mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 01:15:38 +07:00
c2c25cc397
Because the SPI controller deasserts the chip select when the TX fifo is empty (which may happen in the middle of a transfer), the CS should be handled by linux. Unfortunately, some or all of the first four chip selects are not muxable as GPIOs, depending on the SoC. There is a way to bitbang those pins by using the SPI boot controller so use it to set the chip selects. At init time, it is also necessary to give control of the SPI interface to the Designware IP. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
233 lines
5.8 KiB
C
233 lines
5.8 KiB
C
/*
|
|
* Memory-mapped interface driver for DW SPI Core
|
|
*
|
|
* Copyright (c) 2010, Octasic semiconductor.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include "spi-dw.h"
|
|
|
|
#define DRIVER_NAME "dw_spi_mmio"
|
|
|
|
struct dw_spi_mmio {
|
|
struct dw_spi dws;
|
|
struct clk *clk;
|
|
void *priv;
|
|
};
|
|
|
|
#define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL 0x24
|
|
#define OCELOT_IF_SI_OWNER_MASK GENMASK(5, 4)
|
|
#define OCELOT_IF_SI_OWNER_OFFSET 4
|
|
#define MSCC_IF_SI_OWNER_SISL 0
|
|
#define MSCC_IF_SI_OWNER_SIBM 1
|
|
#define MSCC_IF_SI_OWNER_SIMC 2
|
|
|
|
#define MSCC_SPI_MST_SW_MODE 0x14
|
|
#define MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE BIT(13)
|
|
#define MSCC_SPI_MST_SW_MODE_SW_SPI_CS(x) (x << 5)
|
|
|
|
struct dw_spi_mscc {
|
|
struct regmap *syscon;
|
|
void __iomem *spi_mst;
|
|
};
|
|
|
|
/*
|
|
* The Designware SPI controller (referred to as master in the documentation)
|
|
* automatically deasserts chip select when the tx fifo is empty. The chip
|
|
* selects then needs to be either driven as GPIOs or, for the first 4 using the
|
|
* the SPI boot controller registers. the final chip select is an OR gate
|
|
* between the Designware SPI controller and the SPI boot controller.
|
|
*/
|
|
static void dw_spi_mscc_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
struct dw_spi *dws = spi_master_get_devdata(spi->master);
|
|
struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
|
|
struct dw_spi_mscc *dwsmscc = dwsmmio->priv;
|
|
u32 cs = spi->chip_select;
|
|
|
|
if (cs < 4) {
|
|
u32 sw_mode = MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE;
|
|
|
|
if (!enable)
|
|
sw_mode |= MSCC_SPI_MST_SW_MODE_SW_SPI_CS(BIT(cs));
|
|
|
|
writel(sw_mode, dwsmscc->spi_mst + MSCC_SPI_MST_SW_MODE);
|
|
}
|
|
|
|
dw_spi_set_cs(spi, enable);
|
|
}
|
|
|
|
static int dw_spi_mscc_init(struct platform_device *pdev,
|
|
struct dw_spi_mmio *dwsmmio)
|
|
{
|
|
struct dw_spi_mscc *dwsmscc;
|
|
struct resource *res;
|
|
|
|
dwsmscc = devm_kzalloc(&pdev->dev, sizeof(*dwsmscc), GFP_KERNEL);
|
|
if (!dwsmscc)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
dwsmscc->spi_mst = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(dwsmscc->spi_mst)) {
|
|
dev_err(&pdev->dev, "SPI_MST region map failed\n");
|
|
return PTR_ERR(dwsmscc->spi_mst);
|
|
}
|
|
|
|
dwsmscc->syscon = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
|
|
if (IS_ERR(dwsmscc->syscon))
|
|
return PTR_ERR(dwsmscc->syscon);
|
|
|
|
/* Deassert all CS */
|
|
writel(0, dwsmscc->spi_mst + MSCC_SPI_MST_SW_MODE);
|
|
|
|
/* Select the owner of the SI interface */
|
|
regmap_update_bits(dwsmscc->syscon, MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL,
|
|
OCELOT_IF_SI_OWNER_MASK,
|
|
MSCC_IF_SI_OWNER_SIMC << OCELOT_IF_SI_OWNER_OFFSET);
|
|
|
|
dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
|
|
dwsmmio->priv = dwsmscc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_spi_mmio_probe(struct platform_device *pdev)
|
|
{
|
|
int (*init_func)(struct platform_device *pdev,
|
|
struct dw_spi_mmio *dwsmmio);
|
|
struct dw_spi_mmio *dwsmmio;
|
|
struct dw_spi *dws;
|
|
struct resource *mem;
|
|
int ret;
|
|
int num_cs;
|
|
|
|
dwsmmio = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_mmio),
|
|
GFP_KERNEL);
|
|
if (!dwsmmio)
|
|
return -ENOMEM;
|
|
|
|
dws = &dwsmmio->dws;
|
|
|
|
/* Get basic io resource and map it */
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dws->regs = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(dws->regs)) {
|
|
dev_err(&pdev->dev, "SPI region map failed\n");
|
|
return PTR_ERR(dws->regs);
|
|
}
|
|
|
|
dws->irq = platform_get_irq(pdev, 0);
|
|
if (dws->irq < 0) {
|
|
dev_err(&pdev->dev, "no irq resource?\n");
|
|
return dws->irq; /* -ENXIO */
|
|
}
|
|
|
|
dwsmmio->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(dwsmmio->clk))
|
|
return PTR_ERR(dwsmmio->clk);
|
|
ret = clk_prepare_enable(dwsmmio->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dws->bus_num = pdev->id;
|
|
|
|
dws->max_freq = clk_get_rate(dwsmmio->clk);
|
|
|
|
device_property_read_u32(&pdev->dev, "reg-io-width", &dws->reg_io_width);
|
|
|
|
num_cs = 4;
|
|
|
|
device_property_read_u32(&pdev->dev, "num-cs", &num_cs);
|
|
|
|
dws->num_cs = num_cs;
|
|
|
|
if (pdev->dev.of_node) {
|
|
int i;
|
|
|
|
for (i = 0; i < dws->num_cs; i++) {
|
|
int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
|
|
"cs-gpios", i);
|
|
|
|
if (cs_gpio == -EPROBE_DEFER) {
|
|
ret = cs_gpio;
|
|
goto out;
|
|
}
|
|
|
|
if (gpio_is_valid(cs_gpio)) {
|
|
ret = devm_gpio_request(&pdev->dev, cs_gpio,
|
|
dev_name(&pdev->dev));
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
init_func = device_get_match_data(&pdev->dev);
|
|
if (init_func) {
|
|
ret = init_func(pdev, dwsmmio);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
ret = dw_spi_add_host(&pdev->dev, dws);
|
|
if (ret)
|
|
goto out;
|
|
|
|
platform_set_drvdata(pdev, dwsmmio);
|
|
return 0;
|
|
|
|
out:
|
|
clk_disable_unprepare(dwsmmio->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int dw_spi_mmio_remove(struct platform_device *pdev)
|
|
{
|
|
struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
|
|
|
|
dw_spi_remove_host(&dwsmmio->dws);
|
|
clk_disable_unprepare(dwsmmio->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id dw_spi_mmio_of_match[] = {
|
|
{ .compatible = "snps,dw-apb-ssi", },
|
|
{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_init},
|
|
{ /* end of table */}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
|
|
|
|
static struct platform_driver dw_spi_mmio_driver = {
|
|
.probe = dw_spi_mmio_probe,
|
|
.remove = dw_spi_mmio_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = dw_spi_mmio_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(dw_spi_mmio_driver);
|
|
|
|
MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>");
|
|
MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
|
|
MODULE_LICENSE("GPL v2");
|