mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 08:15:17 +07:00
becf123772
Add the ability for the iproc pll to calculate the pll parameters at runtime instead of only using predefined tables. This ability allows the clock users to select from the full range of vco frequencies. The old method of table based programming is retained so that existing users will retain expected behavior. The flag IPROC_CLK_PLL_CALC_PARAM will need to be set to enable the new runtime calculation method. Currently, this is only being enabled for the audio pll. This feature also revealed a problem with the driver using the round_rate api. The round_rate api does not allow for frequencies larger than 2^31 to be returned. Those large frequencies are interpreted as an error code. Therefore, we are moving to the determine_rate api which solves this problem. Signed-off-by: Simran Rai <ssimran@broadcom.com> Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
315 lines
9.9 KiB
C
315 lines
9.9 KiB
C
/*
|
|
* Copyright (C) 2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <dt-bindings/clock/bcm-cygnus.h>
|
|
#include "clk-iproc.h"
|
|
|
|
#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
|
|
|
|
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
|
|
.pwr_shift = ps, .iso_shift = is }
|
|
|
|
#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
|
|
|
|
#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
|
|
{ .offset = o, .en_shift = es, .high_shift = hs, \
|
|
.high_width = hw, .low_shift = ls, .low_width = lw }
|
|
|
|
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
|
|
.p_reset_shift = prs }
|
|
|
|
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
|
|
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
|
|
.ka_width = kaw }
|
|
|
|
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
|
|
|
|
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
|
|
.hold_shift = hs, .bypass_shift = bs }
|
|
|
|
#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
|
|
|
|
static void __init cygnus_armpll_init(struct device_node *node)
|
|
{
|
|
iproc_armpll_setup(node);
|
|
}
|
|
CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
|
|
|
|
static const struct iproc_pll_ctrl genpll = {
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
|
|
IPROC_CLK_PLL_NEEDS_SW_CFG,
|
|
.aon = AON_VAL(0x0, 2, 1, 0),
|
|
.reset = RESET_VAL(0x0, 11, 10),
|
|
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
|
|
.sw_ctrl = SW_CTRL_VAL(0x10, 31),
|
|
.ndiv_int = REG_VAL(0x10, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x10, 0, 20),
|
|
.pdiv = REG_VAL(0x14, 0, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
|
|
.status = REG_VAL(0x28, 12, 1),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl genpll_clk[] = {
|
|
[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 6, 0, 12),
|
|
.mdiv = REG_VAL(0x20, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 7, 1, 13),
|
|
.mdiv = REG_VAL(0x20, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 8, 2, 14),
|
|
.mdiv = REG_VAL(0x20, 20, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 9, 3, 15),
|
|
.mdiv = REG_VAL(0x24, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 10, 4, 16),
|
|
.mdiv = REG_VAL(0x24, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_GENPLL_CAN_CLK] = {
|
|
.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x4, 11, 5, 17),
|
|
.mdiv = REG_VAL(0x24, 20, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_genpll_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
|
|
ARRAY_SIZE(genpll_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
|
|
|
|
static const struct iproc_pll_ctrl lcpll0 = {
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
|
|
.aon = AON_VAL(0x0, 2, 5, 4),
|
|
.reset = RESET_VAL(0x0, 31, 30),
|
|
.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
|
|
.sw_ctrl = SW_CTRL_VAL(0x4, 31),
|
|
.ndiv_int = REG_VAL(0x4, 16, 10),
|
|
.pdiv = REG_VAL(0x4, 26, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
|
|
.status = REG_VAL(0x18, 12, 1),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl lcpll0_clk[] = {
|
|
[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 7, 1, 13),
|
|
.mdiv = REG_VAL(0x8, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 8, 2, 14),
|
|
.mdiv = REG_VAL(0x8, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 9, 3, 15),
|
|
.mdiv = REG_VAL(0x8, 20, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 10, 4, 16),
|
|
.mdiv = REG_VAL(0xc, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 11, 5, 17),
|
|
.mdiv = REG_VAL(0xc, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
|
|
.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x0, 12, 6, 18),
|
|
.mdiv = REG_VAL(0xc, 20, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_lcpll0_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
|
|
ARRAY_SIZE(lcpll0_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
|
|
|
|
/*
|
|
* MIPI PLL VCO frequency parameter table
|
|
*/
|
|
static const struct iproc_pll_vco_param mipipll_vco_params[] = {
|
|
/* rate (Hz) ndiv_int ndiv_frac pdiv */
|
|
{ 750000000UL, 30, 0, 1 },
|
|
{ 1000000000UL, 40, 0, 1 },
|
|
{ 1350000000ul, 54, 0, 1 },
|
|
{ 2000000000UL, 80, 0, 1 },
|
|
{ 2100000000UL, 84, 0, 1 },
|
|
{ 2250000000UL, 90, 0, 1 },
|
|
{ 2500000000UL, 100, 0, 1 },
|
|
{ 2700000000UL, 54, 0, 0 },
|
|
{ 2975000000UL, 119, 0, 1 },
|
|
{ 3100000000UL, 124, 0, 1 },
|
|
{ 3150000000UL, 126, 0, 1 },
|
|
};
|
|
|
|
static const struct iproc_pll_ctrl mipipll = {
|
|
.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
|
|
IPROC_CLK_NEEDS_READ_BACK,
|
|
.aon = AON_VAL(0x0, 4, 17, 16),
|
|
.asiu = ASIU_GATE_VAL(0x0, 3),
|
|
.reset = RESET_VAL(0x0, 11, 10),
|
|
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
|
|
.ndiv_int = REG_VAL(0x10, 20, 10),
|
|
.ndiv_frac = REG_VAL(0x10, 0, 20),
|
|
.pdiv = REG_VAL(0x14, 0, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
|
|
.status = REG_VAL(0x28, 12, 1),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl mipipll_clk[] = {
|
|
[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 12, 6, 18),
|
|
.mdiv = REG_VAL(0x20, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 13, 7, 19),
|
|
.mdiv = REG_VAL(0x20, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 14, 8, 20),
|
|
.mdiv = REG_VAL(0x20, 20, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 15, 9, 21),
|
|
.mdiv = REG_VAL(0x24, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 16, 10, 22),
|
|
.mdiv = REG_VAL(0x24, 10, 8),
|
|
},
|
|
[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
|
|
.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
|
|
.flags = IPROC_CLK_NEEDS_READ_BACK,
|
|
.enable = ENABLE_VAL(0x4, 17, 11, 23),
|
|
.mdiv = REG_VAL(0x24, 20, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_mipipll_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
|
|
ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
|
|
ARRAY_SIZE(mipipll_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
|
|
|
|
static const struct iproc_asiu_div asiu_div[] = {
|
|
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
|
|
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
|
|
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
|
|
};
|
|
|
|
static const struct iproc_asiu_gate asiu_gate[] = {
|
|
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
|
|
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
|
|
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
|
|
};
|
|
|
|
static void __init cygnus_asiu_init(struct device_node *node)
|
|
{
|
|
iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
|
|
|
|
static const struct iproc_pll_ctrl audiopll = {
|
|
.flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
|
|
IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW |
|
|
IPROC_CLK_PLL_CALC_PARAM,
|
|
.reset = RESET_VAL(0x5c, 0, 1),
|
|
.dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
|
|
.sw_ctrl = SW_CTRL_VAL(0x4, 0),
|
|
.ndiv_int = REG_VAL(0x8, 0, 10),
|
|
.ndiv_frac = REG_VAL(0x8, 10, 20),
|
|
.pdiv = REG_VAL(0x44, 0, 4),
|
|
.vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10),
|
|
.status = REG_VAL(0x54, 0, 1),
|
|
.macro_mode = REG_VAL(0x0, 0, 3),
|
|
};
|
|
|
|
static const struct iproc_clk_ctrl audiopll_clk[] = {
|
|
[BCM_CYGNUS_AUDIOPLL_CH0] = {
|
|
.channel = BCM_CYGNUS_AUDIOPLL_CH0,
|
|
.flags = IPROC_CLK_AON | IPROC_CLK_MCLK_DIV_BY_2,
|
|
.enable = ENABLE_VAL(0x14, 8, 10, 9),
|
|
.mdiv = REG_VAL(0x14, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_AUDIOPLL_CH1] = {
|
|
.channel = BCM_CYGNUS_AUDIOPLL_CH1,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x18, 8, 10, 9),
|
|
.mdiv = REG_VAL(0x18, 0, 8),
|
|
},
|
|
[BCM_CYGNUS_AUDIOPLL_CH2] = {
|
|
.channel = BCM_CYGNUS_AUDIOPLL_CH2,
|
|
.flags = IPROC_CLK_AON,
|
|
.enable = ENABLE_VAL(0x1c, 8, 10, 9),
|
|
.mdiv = REG_VAL(0x1c, 0, 8),
|
|
},
|
|
};
|
|
|
|
static void __init cygnus_audiopll_clk_init(struct device_node *node)
|
|
{
|
|
iproc_pll_clk_setup(node, &audiopll, NULL, 0,
|
|
audiopll_clk, ARRAY_SIZE(audiopll_clk));
|
|
}
|
|
CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
|
|
cygnus_audiopll_clk_init);
|