mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 08:58:11 +07:00
724dc336b7
Try to print out startup pgm check info including exact linux kernel version, pgm interruption code and ilc, psw and general registers. Like the following: Linux version 5.3.0-rc7-07282-ge7b4d41d61bd-dirty (gor@tuxmaker) #3 SMP PREEMPT Thu Sep 5 16:07:34 CEST 2019 Kernel fault: interruption code 0005 ilc:2 PSW : 0000000180000000 0000000000012e52 R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 RI:0 EA:3 GPRS: 0000000000000000 00ffffffffffffff 0000000000000000 0000000000019a58 000000000000bf68 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 000000000001a041 0000000000000000 0000000004c9c000 0000000000010070 0000000000012e42 000000000000beb0 This info makes it apparent that kernel startup failed and might help to understand what went wrong without actual standalone dump. Printing code runs on its own stack of 1 page (at unused 0x5000), which should be sufficient for sclp_early_printk usage (typical stack usage observed has been around 512 bytes). The code has pgm check recursion prevention, despite pgm check info printing failure (follow on pgm check) or success it restores original faulty psw and gprs and does disabled wait. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
404 lines
11 KiB
ArmAsm
404 lines
11 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright IBM Corp. 1999, 2010
|
|
*
|
|
* Author(s): Hartmut Penner <hp@de.ibm.com>
|
|
* Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
* Rob van der Heij <rvdhei@iae.nl>
|
|
* Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
*
|
|
* There are 5 different IPL methods
|
|
* 1) load the image directly into ram at address 0 and do an PSW restart
|
|
* 2) linload will load the image from address 0x10000 to memory 0x10000
|
|
* and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
|
|
* 3) generate the tape ipl header, store the generated image on a tape
|
|
* and ipl from it
|
|
* In case of SL tape you need to IPL 5 times to get past VOL1 etc
|
|
* 4) generate the vm reader ipl header, move the generated image to the
|
|
* VM reader (use option NOH!) and do a ipl from reader (VM only)
|
|
* 5) direct call of start by the SALIPL loader
|
|
* We use the cpuid to distinguish between VM and native ipl
|
|
* params for kernel are pushed to 0x10400 (see setup.h)
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/page.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#define ARCH_OFFSET 4
|
|
|
|
__HEAD
|
|
|
|
#define IPL_BS 0x730
|
|
.org 0
|
|
.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
|
|
.long 0x02000018,0x60000050 # by ipl to addresses 0-23.
|
|
.long 0x02000068,0x60000050 # (a PSW and two CCWs).
|
|
.fill 80-24,1,0x40 # bytes 24-79 are discarded !!
|
|
.long 0x020000f0,0x60000050 # The next 160 byte are loaded
|
|
.long 0x02000140,0x60000050 # to addresses 0x18-0xb7
|
|
.long 0x02000190,0x60000050 # They form the continuation
|
|
.long 0x020001e0,0x60000050 # of the CCW program started
|
|
.long 0x02000230,0x60000050 # by ipl and load the range
|
|
.long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
|
|
.long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
|
|
.long 0x02000320,0x60000050 # in memory. At the end of
|
|
.long 0x02000370,0x60000050 # the channel program the PSW
|
|
.long 0x020003c0,0x60000050 # at location 0 is loaded.
|
|
.long 0x02000410,0x60000050 # Initial processing starts
|
|
.long 0x02000460,0x60000050 # at 0x200 = iplstart.
|
|
.long 0x020004b0,0x60000050
|
|
.long 0x02000500,0x60000050
|
|
.long 0x02000550,0x60000050
|
|
.long 0x020005a0,0x60000050
|
|
.long 0x020005f0,0x60000050
|
|
.long 0x02000640,0x60000050
|
|
.long 0x02000690,0x60000050
|
|
.long 0x020006e0,0x20000050
|
|
|
|
.org __LC_RST_NEW_PSW # 0x1a0
|
|
.quad 0,iplstart
|
|
.org __LC_PGM_NEW_PSW # 0x1d0
|
|
.quad 0x0000000180000000,startup_pgm_check_handler
|
|
|
|
.org 0x200
|
|
|
|
#
|
|
# subroutine to wait for end I/O
|
|
#
|
|
.Lirqwait:
|
|
mvc __LC_IO_NEW_PSW(16),.Lnewpsw # set up IO interrupt psw
|
|
lpsw .Lwaitpsw
|
|
.Lioint:
|
|
br %r14
|
|
.align 8
|
|
.Lnewpsw:
|
|
.quad 0x0000000080000000,.Lioint
|
|
.Lwaitpsw:
|
|
.long 0x020a0000,0x80000000+.Lioint
|
|
|
|
#
|
|
# subroutine for loading cards from the reader
|
|
#
|
|
.Lloader:
|
|
la %r4,0(%r14)
|
|
la %r3,.Lorb # r2 = address of orb into r2
|
|
la %r5,.Lirb # r4 = address of irb
|
|
la %r6,.Lccws
|
|
la %r7,20
|
|
.Linit:
|
|
st %r2,4(%r6) # initialize CCW data addresses
|
|
la %r2,0x50(%r2)
|
|
la %r6,8(%r6)
|
|
bct 7,.Linit
|
|
|
|
lctl %c6,%c6,.Lcr6 # set IO subclass mask
|
|
slr %r2,%r2
|
|
.Lldlp:
|
|
ssch 0(%r3) # load chunk of 1600 bytes
|
|
bnz .Llderr
|
|
.Lwait4irq:
|
|
bas %r14,.Lirqwait
|
|
c %r1,__LC_SUBCHANNEL_ID # compare subchannel number
|
|
bne .Lwait4irq
|
|
tsch 0(%r5)
|
|
|
|
slr %r0,%r0
|
|
ic %r0,8(%r5) # get device status
|
|
chi %r0,8 # channel end ?
|
|
be .Lcont
|
|
chi %r0,12 # channel end + device end ?
|
|
be .Lcont
|
|
|
|
l %r0,4(%r5)
|
|
s %r0,8(%r3) # r0/8 = number of ccws executed
|
|
mhi %r0,10 # *10 = number of bytes in ccws
|
|
lh %r3,10(%r5) # get residual count
|
|
sr %r0,%r3 # #ccws*80-residual=#bytes read
|
|
ar %r2,%r0
|
|
|
|
br %r4 # r2 contains the total size
|
|
|
|
.Lcont:
|
|
ahi %r2,0x640 # add 0x640 to total size
|
|
la %r6,.Lccws
|
|
la %r7,20
|
|
.Lincr:
|
|
l %r0,4(%r6) # update CCW data addresses
|
|
ahi %r0,0x640
|
|
st %r0,4(%r6)
|
|
ahi %r6,8
|
|
bct 7,.Lincr
|
|
|
|
b .Lldlp
|
|
.Llderr:
|
|
lpsw .Lcrash
|
|
|
|
.align 8
|
|
.Lorb: .long 0x00000000,0x0080ff00,.Lccws
|
|
.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
|
|
.Lcr6: .long 0xff000000
|
|
.Lloadp:.long 0,0
|
|
.align 8
|
|
.Lcrash:.long 0x000a0000,0x00000000
|
|
|
|
.align 8
|
|
.Lccws: .rept 19
|
|
.long 0x02600050,0x00000000
|
|
.endr
|
|
.long 0x02200050,0x00000000
|
|
|
|
iplstart:
|
|
mvi __LC_AR_MODE_ID,1 # set esame flag
|
|
slr %r0,%r0 # set cpuid to zero
|
|
lhi %r1,2 # mode 2 = esame (dump)
|
|
sigp %r1,%r0,0x12 # switch to esame mode
|
|
bras %r13,0f
|
|
.fill 16,4,0x0
|
|
0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
|
|
sam31 # switch to 31 bit addressing mode
|
|
lh %r1,__LC_SUBCHANNEL_ID # test if subchannel number
|
|
bct %r1,.Lnoload # is valid
|
|
l %r1,__LC_SUBCHANNEL_ID # load ipl subchannel number
|
|
la %r2,IPL_BS # load start address
|
|
bas %r14,.Lloader # load rest of ipl image
|
|
l %r12,.Lparm # pointer to parameter area
|
|
st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
|
|
|
|
#
|
|
# load parameter file from ipl device
|
|
#
|
|
.Lagain1:
|
|
l %r2,.Linitrd # ramdisk loc. is temp
|
|
bas %r14,.Lloader # load parameter file
|
|
ltr %r2,%r2 # got anything ?
|
|
bz .Lnopf
|
|
chi %r2,895
|
|
bnh .Lnotrunc
|
|
la %r2,895
|
|
.Lnotrunc:
|
|
l %r4,.Linitrd
|
|
clc 0(3,%r4),.L_hdr # if it is HDRx
|
|
bz .Lagain1 # skip dataset header
|
|
clc 0(3,%r4),.L_eof # if it is EOFx
|
|
bz .Lagain1 # skip dateset trailer
|
|
la %r5,0(%r4,%r2)
|
|
lr %r3,%r2
|
|
la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
|
|
mvc 0(256,%r3),0(%r4)
|
|
mvc 256(256,%r3),256(%r4)
|
|
mvc 512(256,%r3),512(%r4)
|
|
mvc 768(122,%r3),768(%r4)
|
|
slr %r0,%r0
|
|
b .Lcntlp
|
|
.Ldelspc:
|
|
ic %r0,0(%r2,%r3)
|
|
chi %r0,0x20 # is it a space ?
|
|
be .Lcntlp
|
|
ahi %r2,1
|
|
b .Leolp
|
|
.Lcntlp:
|
|
brct %r2,.Ldelspc
|
|
.Leolp:
|
|
slr %r0,%r0
|
|
stc %r0,0(%r2,%r3) # terminate buffer
|
|
.Lnopf:
|
|
|
|
#
|
|
# load ramdisk from ipl device
|
|
#
|
|
.Lagain2:
|
|
l %r2,.Linitrd # addr of ramdisk
|
|
st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
|
|
bas %r14,.Lloader # load ramdisk
|
|
st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
|
|
ltr %r2,%r2
|
|
bnz .Lrdcont
|
|
st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
|
|
.Lrdcont:
|
|
l %r2,.Linitrd
|
|
|
|
clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
|
|
bz .Lagain2
|
|
clc 0(3,%r2),.L_eof
|
|
bz .Lagain2
|
|
|
|
#
|
|
# reset files in VM reader
|
|
#
|
|
stidp .Lcpuid # store cpuid
|
|
tm .Lcpuid,0xff # running VM ?
|
|
bno .Lnoreset
|
|
la %r2,.Lreset
|
|
lhi %r3,26
|
|
diag %r2,%r3,8
|
|
la %r5,.Lirb
|
|
stsch 0(%r5) # check if irq is pending
|
|
tm 30(%r5),0x0f # by verifying if any of the
|
|
bnz .Lwaitforirq # activity or status control
|
|
tm 31(%r5),0xff # bits is set in the schib
|
|
bz .Lnoreset
|
|
.Lwaitforirq:
|
|
bas %r14,.Lirqwait # wait for IO interrupt
|
|
c %r1,__LC_SUBCHANNEL_ID # compare subchannel number
|
|
bne .Lwaitforirq
|
|
la %r5,.Lirb
|
|
tsch 0(%r5)
|
|
.Lnoreset:
|
|
b .Lnoload
|
|
|
|
#
|
|
# everything loaded, go for it
|
|
#
|
|
.Lnoload:
|
|
l %r1,.Lstartup
|
|
br %r1
|
|
|
|
.Linitrd:.long _end # default address of initrd
|
|
.Lparm: .long PARMAREA
|
|
.Lstartup: .long startup
|
|
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
|
|
.byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
|
|
.byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
|
|
.L_eof: .long 0xc5d6c600 /* C'EOF' */
|
|
.L_hdr: .long 0xc8c4d900 /* C'HDR' */
|
|
.align 8
|
|
.Lcpuid:.fill 8,1,0
|
|
|
|
#
|
|
# startup-code at 0x10000, running in absolute addressing mode
|
|
# this is called either by the ipl loader or directly by PSW restart
|
|
# or linload or SALIPL
|
|
#
|
|
.org 0x10000
|
|
ENTRY(startup)
|
|
j .Lep_startup_normal
|
|
.org EP_OFFSET
|
|
#
|
|
# This is a list of s390 kernel entry points. At address 0x1000f the number of
|
|
# valid entry points is stored.
|
|
#
|
|
# IMPORTANT: Do not change this table, it is s390 kernel ABI!
|
|
#
|
|
.ascii EP_STRING
|
|
.byte 0x00,0x01
|
|
#
|
|
# kdump startup-code at 0x10010, running in 64 bit absolute addressing mode
|
|
#
|
|
.org 0x10010
|
|
ENTRY(startup_kdump)
|
|
j .Lep_startup_kdump
|
|
.Lep_startup_normal:
|
|
mvi __LC_AR_MODE_ID,1 # set esame flag
|
|
slr %r0,%r0 # set cpuid to zero
|
|
lhi %r1,2 # mode 2 = esame (dump)
|
|
sigp %r1,%r0,0x12 # switch to esame mode
|
|
bras %r13,0f
|
|
.fill 16,4,0x0
|
|
0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
|
|
sam64 # switch to 64 bit addressing mode
|
|
basr %r13,0 # get base
|
|
.LPG0:
|
|
xc 0x200(256),0x200 # partially clear lowcore
|
|
xc 0x300(256),0x300
|
|
xc 0xe00(256),0xe00
|
|
xc 0xf00(256),0xf00
|
|
lctlg %c0,%c15,.Lctl-.LPG0(%r13) # load control registers
|
|
stcke __LC_BOOT_CLOCK
|
|
mvc __LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1
|
|
spt 6f-.LPG0(%r13)
|
|
mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
|
|
l %r15,.Lstack-.LPG0(%r13)
|
|
brasl %r14,verify_facilities
|
|
brasl %r14,startup_kernel
|
|
|
|
.Lstack:
|
|
.long 0x8000 + (1<<(PAGE_SHIFT+BOOT_STACK_ORDER)) - STACK_FRAME_OVERHEAD
|
|
.align 8
|
|
6: .long 0x7fffffff,0xffffffff
|
|
|
|
.Lctl: .quad 0x04040000 # cr0: AFP registers & secondary space
|
|
.quad 0 # cr1: primary space segment table
|
|
.quad .Lduct # cr2: dispatchable unit control table
|
|
.quad 0 # cr3: instruction authorization
|
|
.quad 0xffff # cr4: instruction authorization
|
|
.quad .Lduct # cr5: primary-aste origin
|
|
.quad 0 # cr6: I/O interrupts
|
|
.quad 0 # cr7: secondary space segment table
|
|
.quad 0 # cr8: access registers translation
|
|
.quad 0 # cr9: tracing off
|
|
.quad 0 # cr10: tracing off
|
|
.quad 0 # cr11: tracing off
|
|
.quad 0 # cr12: tracing off
|
|
.quad 0 # cr13: home space segment table
|
|
.quad 0xc0000000 # cr14: machine check handling off
|
|
.quad .Llinkage_stack # cr15: linkage stack operations
|
|
|
|
.section .dma.data,"aw",@progbits
|
|
.Lduct: .long 0,.Laste,.Laste,0,.Lduald,0,0,0
|
|
.long 0,0,0,0,0,0,0,0
|
|
.Llinkage_stack:
|
|
.long 0,0,0x89000000,0,0,0,0x8a000000,0
|
|
.align 64
|
|
.Laste: .quad 0,0xffffffffffffffff,0,0,0,0,0,0
|
|
.align 128
|
|
.Lduald:.rept 8
|
|
.long 0x80000000,0,0,0 # invalid access-list entries
|
|
.endr
|
|
.previous
|
|
|
|
#include "head_kdump.S"
|
|
|
|
#
|
|
# This program check is active immediately after kernel start
|
|
# and until early_pgm_check_handler is set in kernel/early.c
|
|
# It simply saves general/control registers and psw in
|
|
# the save area and does disabled wait with a faulty address.
|
|
#
|
|
ENTRY(startup_pgm_check_handler)
|
|
stmg %r0,%r15,__LC_SAVE_AREA_SYNC
|
|
la %r1,4095
|
|
stctg %c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r1)
|
|
mvc __LC_GPREGS_SAVE_AREA-4095(128,%r1),__LC_SAVE_AREA_SYNC
|
|
mvc __LC_PSW_SAVE_AREA-4095(16,%r1),__LC_PGM_OLD_PSW
|
|
mvc __LC_RETURN_PSW(16),__LC_PGM_OLD_PSW
|
|
ni __LC_RETURN_PSW,0xfc # remove IO and EX bits
|
|
ni __LC_RETURN_PSW+1,0xfb # remove MCHK bit
|
|
oi __LC_RETURN_PSW+1,0x2 # set wait state bit
|
|
larl %r2,.Lold_psw_disabled_wait
|
|
stg %r2,__LC_PGM_NEW_PSW+8
|
|
l %r15,.Ldump_info_stack-.Lold_psw_disabled_wait(%r2)
|
|
brasl %r14,print_pgm_check_info
|
|
.Lold_psw_disabled_wait:
|
|
la %r1,4095
|
|
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
|
|
lpswe __LC_RETURN_PSW # disabled wait
|
|
.Ldump_info_stack:
|
|
.long 0x5000 + PAGE_SIZE - STACK_FRAME_OVERHEAD
|
|
ENDPROC(startup_pgm_check_handler)
|
|
|
|
#
|
|
# params at 10400 (setup.h)
|
|
# Must be keept in sync with struct parmarea in setup.h
|
|
#
|
|
.org PARMAREA
|
|
.quad 0 # IPL_DEVICE
|
|
.quad 0 # INITRD_START
|
|
.quad 0 # INITRD_SIZE
|
|
.quad 0 # OLDMEM_BASE
|
|
.quad 0 # OLDMEM_SIZE
|
|
.quad kernel_version # points to kernel version string
|
|
|
|
.org COMMAND_LINE
|
|
.byte "root=/dev/ram0 ro"
|
|
.byte 0
|
|
|
|
.org EARLY_SCCB_OFFSET
|
|
.fill 4096
|
|
|
|
.org HEAD_END
|