mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 01:30:52 +07:00
47c3e7783b
PPPOL2TP_MSG_* and L2TP_MSG_* are duplicates, and are being used interchangeably in the kernel, so let's standardize on L2TP_MSG_* internally, and keep PPPOL2TP_MSG_* defined in UAPI for compatibility. Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> Signed-off-by: David S. Miller <davem@davemloft.net>
346 lines
14 KiB
Plaintext
346 lines
14 KiB
Plaintext
This document describes how to use the kernel's L2TP drivers to
|
|
provide L2TP functionality. L2TP is a protocol that tunnels one or
|
|
more sessions over an IP tunnel. It is commonly used for VPNs
|
|
(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
|
|
network infrastructure. With L2TPv3, it is also useful as a Layer-2
|
|
tunneling infrastructure.
|
|
|
|
Features
|
|
========
|
|
|
|
L2TPv2 (PPP over L2TP (UDP tunnels)).
|
|
L2TPv3 ethernet pseudowires.
|
|
L2TPv3 PPP pseudowires.
|
|
L2TPv3 IP encapsulation.
|
|
Netlink sockets for L2TPv3 configuration management.
|
|
|
|
History
|
|
=======
|
|
|
|
The original pppol2tp driver was introduced in 2.6.23 and provided
|
|
L2TPv2 functionality (rfc2661). L2TPv2 is used to tunnel one or more PPP
|
|
sessions over a UDP tunnel.
|
|
|
|
L2TPv3 (rfc3931) changes the protocol to allow different frame types
|
|
to be passed over an L2TP tunnel by moving the PPP-specific parts of
|
|
the protocol out of the core L2TP packet headers. Each frame type is
|
|
known as a pseudowire type. Ethernet, PPP, HDLC, Frame Relay and ATM
|
|
pseudowires for L2TP are defined in separate RFC standards. Another
|
|
change for L2TPv3 is that it can be carried directly over IP with no
|
|
UDP header (UDP is optional). It is also possible to create static
|
|
unmanaged L2TPv3 tunnels manually without a control protocol
|
|
(userspace daemon) to manage them.
|
|
|
|
To support L2TPv3, the original pppol2tp driver was split up to
|
|
separate the L2TP and PPP functionality. Existing L2TPv2 userspace
|
|
apps should be unaffected as the original pppol2tp sockets API is
|
|
retained. L2TPv3, however, uses netlink to manage L2TPv3 tunnels and
|
|
sessions.
|
|
|
|
Design
|
|
======
|
|
|
|
The L2TP protocol separates control and data frames. The L2TP kernel
|
|
drivers handle only L2TP data frames; control frames are always
|
|
handled by userspace. L2TP control frames carry messages between L2TP
|
|
clients/servers and are used to setup / teardown tunnels and
|
|
sessions. An L2TP client or server is implemented in userspace.
|
|
|
|
Each L2TP tunnel is implemented using a UDP or L2TPIP socket; L2TPIP
|
|
provides L2TPv3 IP encapsulation (no UDP) and is implemented using a
|
|
new l2tpip socket family. The tunnel socket is typically created by
|
|
userspace, though for unmanaged L2TPv3 tunnels, the socket can also be
|
|
created by the kernel. Each L2TP session (pseudowire) gets a network
|
|
interface instance. In the case of PPP, these interfaces are created
|
|
indirectly by pppd using a pppol2tp socket. In the case of ethernet,
|
|
the netdevice is created upon a netlink request to create an L2TPv3
|
|
ethernet pseudowire.
|
|
|
|
For PPP, the PPPoL2TP driver, net/l2tp/l2tp_ppp.c, provides a
|
|
mechanism by which PPP frames carried through an L2TP session are
|
|
passed through the kernel's PPP subsystem. The standard PPP daemon,
|
|
pppd, handles all PPP interaction with the peer. PPP network
|
|
interfaces are created for each local PPP endpoint. The kernel's PPP
|
|
subsystem arranges for PPP control frames to be delivered to pppd,
|
|
while data frames are forwarded as usual.
|
|
|
|
For ethernet, the L2TPETH driver, net/l2tp/l2tp_eth.c, implements a
|
|
netdevice driver, managing virtual ethernet devices, one per
|
|
pseudowire. These interfaces can be managed using standard Linux tools
|
|
such as "ip" and "ifconfig". If only IP frames are passed over the
|
|
tunnel, the interface can be given an IP addresses of itself and its
|
|
peer. If non-IP frames are to be passed over the tunnel, the interface
|
|
can be added to a bridge using brctl. All L2TP datapath protocol
|
|
functions are handled by the L2TP core driver.
|
|
|
|
Each tunnel and session within a tunnel is assigned a unique tunnel_id
|
|
and session_id. These ids are carried in the L2TP header of every
|
|
control and data packet. (Actually, in L2TPv3, the tunnel_id isn't
|
|
present in data frames - it is inferred from the IP connection on
|
|
which the packet was received.) The L2TP driver uses the ids to lookup
|
|
internal tunnel and/or session contexts to determine how to handle the
|
|
packet. Zero tunnel / session ids are treated specially - zero ids are
|
|
never assigned to tunnels or sessions in the network. In the driver,
|
|
the tunnel context keeps a reference to the tunnel UDP or L2TPIP
|
|
socket. The session context holds data that lets the driver interface
|
|
to the kernel's network frame type subsystems, i.e. PPP, ethernet.
|
|
|
|
Userspace Programming
|
|
=====================
|
|
|
|
For L2TPv2, there are a number of requirements on the userspace L2TP
|
|
daemon in order to use the pppol2tp driver.
|
|
|
|
1. Use a UDP socket per tunnel.
|
|
|
|
2. Create a single PPPoL2TP socket per tunnel bound to a special null
|
|
session id. This is used only for communicating with the driver but
|
|
must remain open while the tunnel is active. Opening this tunnel
|
|
management socket causes the driver to mark the tunnel socket as an
|
|
L2TP UDP encapsulation socket and flags it for use by the
|
|
referenced tunnel id. This hooks up the UDP receive path via
|
|
udp_encap_rcv() in net/ipv4/udp.c. PPP data frames are never passed
|
|
in this special PPPoX socket.
|
|
|
|
3. Create a PPPoL2TP socket per L2TP session. This is typically done
|
|
by starting pppd with the pppol2tp plugin and appropriate
|
|
arguments. A PPPoL2TP tunnel management socket (Step 2) must be
|
|
created before the first PPPoL2TP session socket is created.
|
|
|
|
When creating PPPoL2TP sockets, the application provides information
|
|
to the driver about the socket in a socket connect() call. Source and
|
|
destination tunnel and session ids are provided, as well as the file
|
|
descriptor of a UDP socket. See struct pppol2tp_addr in
|
|
include/linux/if_pppol2tp.h. Note that zero tunnel / session ids are
|
|
treated specially. When creating the per-tunnel PPPoL2TP management
|
|
socket in Step 2 above, zero source and destination session ids are
|
|
specified, which tells the driver to prepare the supplied UDP file
|
|
descriptor for use as an L2TP tunnel socket.
|
|
|
|
Userspace may control behavior of the tunnel or session using
|
|
setsockopt and ioctl on the PPPoX socket. The following socket
|
|
options are supported:-
|
|
|
|
DEBUG - bitmask of debug message categories. See below.
|
|
SENDSEQ - 0 => don't send packets with sequence numbers
|
|
1 => send packets with sequence numbers
|
|
RECVSEQ - 0 => receive packet sequence numbers are optional
|
|
1 => drop receive packets without sequence numbers
|
|
LNSMODE - 0 => act as LAC.
|
|
1 => act as LNS.
|
|
REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
|
|
|
|
Only the DEBUG option is supported by the special tunnel management
|
|
PPPoX socket.
|
|
|
|
In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
|
|
to retrieve tunnel and session statistics from the kernel using the
|
|
PPPoX socket of the appropriate tunnel or session.
|
|
|
|
For L2TPv3, userspace must use the netlink API defined in
|
|
include/linux/l2tp.h to manage tunnel and session contexts. The
|
|
general procedure to create a new L2TP tunnel with one session is:-
|
|
|
|
1. Open a GENL socket using L2TP_GENL_NAME for configuring the kernel
|
|
using netlink.
|
|
|
|
2. Create a UDP or L2TPIP socket for the tunnel.
|
|
|
|
3. Create a new L2TP tunnel using a L2TP_CMD_TUNNEL_CREATE
|
|
request. Set attributes according to desired tunnel parameters,
|
|
referencing the UDP or L2TPIP socket created in the previous step.
|
|
|
|
4. Create a new L2TP session in the tunnel using a
|
|
L2TP_CMD_SESSION_CREATE request.
|
|
|
|
The tunnel and all of its sessions are closed when the tunnel socket
|
|
is closed. The netlink API may also be used to delete sessions and
|
|
tunnels. Configuration and status info may be set or read using netlink.
|
|
|
|
The L2TP driver also supports static (unmanaged) L2TPv3 tunnels. These
|
|
are where there is no L2TP control message exchange with the peer to
|
|
setup the tunnel; the tunnel is configured manually at each end of the
|
|
tunnel. There is no need for an L2TP userspace application in this
|
|
case -- the tunnel socket is created by the kernel and configured
|
|
using parameters sent in the L2TP_CMD_TUNNEL_CREATE netlink
|
|
request. The "ip" utility of iproute2 has commands for managing static
|
|
L2TPv3 tunnels; do "ip l2tp help" for more information.
|
|
|
|
Debugging
|
|
=========
|
|
|
|
The driver supports a flexible debug scheme where kernel trace
|
|
messages may be optionally enabled per tunnel and per session. Care is
|
|
needed when debugging a live system since the messages are not
|
|
rate-limited and a busy system could be swamped. Userspace uses
|
|
setsockopt on the PPPoX socket to set a debug mask.
|
|
|
|
The following debug mask bits are available:
|
|
|
|
L2TP_MSG_DEBUG verbose debug (if compiled in)
|
|
L2TP_MSG_CONTROL userspace - kernel interface
|
|
L2TP_MSG_SEQ sequence numbers handling
|
|
L2TP_MSG_DATA data packets
|
|
|
|
If enabled, files under a l2tp debugfs directory can be used to dump
|
|
kernel state about L2TP tunnels and sessions. To access it, the
|
|
debugfs filesystem must first be mounted.
|
|
|
|
# mount -t debugfs debugfs /debug
|
|
|
|
Files under the l2tp directory can then be accessed.
|
|
|
|
# cat /debug/l2tp/tunnels
|
|
|
|
The debugfs files should not be used by applications to obtain L2TP
|
|
state information because the file format is subject to change. It is
|
|
implemented to provide extra debug information to help diagnose
|
|
problems.) Users should use the netlink API.
|
|
|
|
/proc/net/pppol2tp is also provided for backwards compatibility with
|
|
the original pppol2tp driver. It lists information about L2TPv2
|
|
tunnels and sessions only. Its use is discouraged.
|
|
|
|
Unmanaged L2TPv3 Tunnels
|
|
========================
|
|
|
|
Some commercial L2TP products support unmanaged L2TPv3 ethernet
|
|
tunnels, where there is no L2TP control protocol; tunnels are
|
|
configured at each side manually. New commands are available in
|
|
iproute2's ip utility to support this.
|
|
|
|
To create an L2TPv3 ethernet pseudowire between local host 192.168.1.1
|
|
and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the
|
|
tunnel endpoints:-
|
|
|
|
# ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \
|
|
udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2
|
|
# ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1
|
|
# ip -s -d show dev l2tpeth0
|
|
# ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0
|
|
# ip li set dev l2tpeth0 up
|
|
|
|
Choose IP addresses to be the address of a local IP interface and that
|
|
of the remote system. The IP addresses of the l2tpeth0 interface can be
|
|
anything suitable.
|
|
|
|
Repeat the above at the peer, with ports, tunnel/session ids and IP
|
|
addresses reversed. The tunnel and session IDs can be any non-zero
|
|
32-bit number, but the values must be reversed at the peer.
|
|
|
|
Host 1 Host2
|
|
udp_sport=5000 udp_sport=5001
|
|
udp_dport=5001 udp_dport=5000
|
|
tunnel_id=42 tunnel_id=45
|
|
peer_tunnel_id=45 peer_tunnel_id=42
|
|
session_id=128 session_id=5196755
|
|
peer_session_id=5196755 peer_session_id=128
|
|
|
|
When done at both ends of the tunnel, it should be possible to send
|
|
data over the network. e.g.
|
|
|
|
# ping 10.5.1.1
|
|
|
|
|
|
Sample Userspace Code
|
|
=====================
|
|
|
|
1. Create tunnel management PPPoX socket
|
|
|
|
kernel_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
|
|
if (kernel_fd >= 0) {
|
|
struct sockaddr_pppol2tp sax;
|
|
struct sockaddr_in const *peer_addr;
|
|
|
|
peer_addr = l2tp_tunnel_get_peer_addr(tunnel);
|
|
memset(&sax, 0, sizeof(sax));
|
|
sax.sa_family = AF_PPPOX;
|
|
sax.sa_protocol = PX_PROTO_OL2TP;
|
|
sax.pppol2tp.fd = udp_fd; /* fd of tunnel UDP socket */
|
|
sax.pppol2tp.addr.sin_addr.s_addr = peer_addr->sin_addr.s_addr;
|
|
sax.pppol2tp.addr.sin_port = peer_addr->sin_port;
|
|
sax.pppol2tp.addr.sin_family = AF_INET;
|
|
sax.pppol2tp.s_tunnel = tunnel_id;
|
|
sax.pppol2tp.s_session = 0; /* special case: mgmt socket */
|
|
sax.pppol2tp.d_tunnel = 0;
|
|
sax.pppol2tp.d_session = 0; /* special case: mgmt socket */
|
|
|
|
if(connect(kernel_fd, (struct sockaddr *)&sax, sizeof(sax) ) < 0 ) {
|
|
perror("connect failed");
|
|
result = -errno;
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
2. Create session PPPoX data socket
|
|
|
|
struct sockaddr_pppol2tp sax;
|
|
int fd;
|
|
|
|
/* Note, the target socket must be bound already, else it will not be ready */
|
|
sax.sa_family = AF_PPPOX;
|
|
sax.sa_protocol = PX_PROTO_OL2TP;
|
|
sax.pppol2tp.fd = tunnel_fd;
|
|
sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
|
|
sax.pppol2tp.addr.sin_port = addr->sin_port;
|
|
sax.pppol2tp.addr.sin_family = AF_INET;
|
|
sax.pppol2tp.s_tunnel = tunnel_id;
|
|
sax.pppol2tp.s_session = session_id;
|
|
sax.pppol2tp.d_tunnel = peer_tunnel_id;
|
|
sax.pppol2tp.d_session = peer_session_id;
|
|
|
|
/* session_fd is the fd of the session's PPPoL2TP socket.
|
|
* tunnel_fd is the fd of the tunnel UDP socket.
|
|
*/
|
|
fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
|
|
if (fd < 0 ) {
|
|
return -errno;
|
|
}
|
|
return 0;
|
|
|
|
Internal Implementation
|
|
=======================
|
|
|
|
The driver keeps a struct l2tp_tunnel context per L2TP tunnel and a
|
|
struct l2tp_session context for each session. The l2tp_tunnel is
|
|
always associated with a UDP or L2TP/IP socket and keeps a list of
|
|
sessions in the tunnel. The l2tp_session context keeps kernel state
|
|
about the session. It has private data which is used for data specific
|
|
to the session type. With L2TPv2, the session always carried PPP
|
|
traffic. With L2TPv3, the session can also carry ethernet frames
|
|
(ethernet pseudowire) or other data types such as ATM, HDLC or Frame
|
|
Relay.
|
|
|
|
When a tunnel is first opened, the reference count on the socket is
|
|
increased using sock_hold(). This ensures that the kernel socket
|
|
cannot be removed while L2TP's data structures reference it.
|
|
|
|
Some L2TP sessions also have a socket (PPP pseudowires) while others
|
|
do not (ethernet pseudowires). We can't use the socket reference count
|
|
as the reference count for session contexts. The L2TP implementation
|
|
therefore has its own internal reference counts on the session
|
|
contexts.
|
|
|
|
To Do
|
|
=====
|
|
|
|
Add L2TP tunnel switching support. This would route tunneled traffic
|
|
from one L2TP tunnel into another. Specified in
|
|
http://tools.ietf.org/html/draft-ietf-l2tpext-tunnel-switching-08
|
|
|
|
Add L2TPv3 VLAN pseudowire support.
|
|
|
|
Add L2TPv3 IP pseudowire support.
|
|
|
|
Add L2TPv3 ATM pseudowire support.
|
|
|
|
Miscellaneous
|
|
=============
|
|
|
|
The L2TP drivers were developed as part of the OpenL2TP project by
|
|
Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
|
|
designed from the ground up to have the L2TP datapath in the
|
|
kernel. The project also implemented the pppol2tp plugin for pppd
|
|
which allows pppd to use the kernel driver. Details can be found at
|
|
http://www.openl2tp.org.
|