mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 00:35:35 +07:00
b993292f73
We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse the three nodes into one USB device node, reflecting the true nature of the hardware. Since we're here, we also mark the irq trigger flags correctly, as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
402 lines
7.7 KiB
Plaintext
402 lines
7.7 KiB
Plaintext
#include "qcom-apq8064-v2.0.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/mfd/qcom-rpm.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
model = "Sony Xperia Z";
|
|
compatible = "sony,xperia-yuga", "qcom,apq8064";
|
|
|
|
aliases {
|
|
serial0 = &gsbi5_serial;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pin_a>;
|
|
|
|
camera-focus {
|
|
label = "camera_focus";
|
|
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
};
|
|
|
|
camera-snapshot {
|
|
label = "camera_snapshot";
|
|
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "volume_down";
|
|
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "volume_up";
|
|
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
pinctrl@800000 {
|
|
gsbi5_uart_pin_a: gsbi5-uart-pin-active {
|
|
rx {
|
|
pins = "gpio52";
|
|
function = "gsbi5";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
tx {
|
|
pins = "gpio51";
|
|
function = "gsbi5";
|
|
drive-strength = <4>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
|
|
sdcc3_cd_pin_a: sdcc3-cd-pin-active {
|
|
pins = "gpio26";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
|
|
rpm@108000 {
|
|
regulators {
|
|
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
|
|
vin_lvs_1_3_6-supply = <&pm8921_s4>;
|
|
vin_lvs_4_5_7-supply = <&pm8921_s4>;
|
|
vin_ncp-supply = <&pm8921_l6>;
|
|
vin_lvs2-supply = <&pm8921_s4>;
|
|
vin_l24-supply = <&pm8921_s1>;
|
|
vin_l25-supply = <&pm8921_s1>;
|
|
vin_l27-supply = <&pm8921_s7>;
|
|
vin_l28-supply = <&pm8921_s7>;
|
|
|
|
/* Buck SMPS */
|
|
s1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
qcom,switch-mode-frequency = <3200000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
s2 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
qcom,switch-mode-frequency = <1600000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
qcom,switch-mode-frequency = <4800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
s4 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
qcom,switch-mode-frequency = <1600000>;
|
|
bias-pull-down;
|
|
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
|
|
};
|
|
|
|
s7 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
qcom,switch-mode-frequency = <3200000>;
|
|
};
|
|
|
|
s8 {
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
qcom,switch-mode-frequency = <1600000>;
|
|
};
|
|
|
|
/* PMOS LDO */
|
|
l1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l4 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1850000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l10 {
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l21 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l22 {
|
|
regulator-min-microvolt = <2600000>;
|
|
regulator-max-microvolt = <2600000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l23 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l24 {
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l25 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l27 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
l28 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
l29 {
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
/* Low Voltage Switch */
|
|
lvs1 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs2 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs3 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs4 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs5 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs6 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
lvs7 {
|
|
bias-pull-down;
|
|
};
|
|
|
|
usb-switch {};
|
|
|
|
hdmi-switch {};
|
|
|
|
ncp {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
qcom,switch-mode-frequency = <1600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
pmic@0 {
|
|
gpio@150 {
|
|
gpio_keys_pin_a: gpio-keys-pin-active {
|
|
pins = "gpio3", "gpio4", "gpio29", "gpio35";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
drive-push-pull;
|
|
input-enable;
|
|
power-source = <2>;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
|
qcom,pull-up-strength = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
usb@12500000 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
ulpi {
|
|
phy {
|
|
v3p3-supply = <&pm8921_l3>;
|
|
v1p8-supply = <&pm8921_l4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gsbi@1a200000 {
|
|
status = "ok";
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
|
|
serial@1a240000 {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gsbi5_uart_pin_a>;
|
|
};
|
|
};
|
|
|
|
amba {
|
|
sdcc1: sdcc@12400000 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8921_l5>;
|
|
vqmmc-supply = <&pm8921_s4>;
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8921_l6>;
|
|
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
|
|
};
|
|
};
|
|
|
|
riva-pil@3204000 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
|
|
};
|
|
};
|
|
};
|