mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
9459a04b6a
The register array offset for clearing an interrupt is calculated by:
offset = (hwirq - RESERVED_IRQ_PER_MBIGEN_CHIP) / 32;
This is wrong because the clear register array includes the reserved
interrupts. So the clear operation ends up in the wrong register.
This went unnoticed so far, because the hardware clears the real bit
through a timeout mechanism when the hardware is configured in debug
mode. That debug mode was enabled on early generations of the hardware, so
the problem was papered over.
On newer hardware with updated firmware the debug mode was disabled, so the
bits did not get cleared which causes the system to malfunction.
Remove the subtraction of RESERVED_IRQ_PER_MBIGEN_CHIP, so the correct
register is accessed.
[ tglx: Rewrote changelog ]
Fixes: a6c2f87b88
("irqchip/mbigen: Implement the mbigen irq chip operation functions")
Signed-off-by: MaJun <majun258@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: linuxarm@huawei.com
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Link: http://lkml.kernel.org/r/1494561328-39514-4-git-send-email-guohanjun@huawei.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
391 lines
9.6 KiB
C
391 lines
9.6 KiB
C
/*
|
|
* Copyright (C) 2015 Hisilicon Limited, All Rights Reserved.
|
|
* Author: Jun Ma <majun258@huawei.com>
|
|
* Author: Yun Wu <wuyun.wu@huawei.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Interrupt numbers per mbigen node supported */
|
|
#define IRQS_PER_MBIGEN_NODE 128
|
|
|
|
/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */
|
|
#define RESERVED_IRQ_PER_MBIGEN_CHIP 64
|
|
|
|
/* The maximum IRQ pin number of mbigen chip(start from 0) */
|
|
#define MAXIMUM_IRQ_PIN_NUM 1407
|
|
|
|
/**
|
|
* In mbigen vector register
|
|
* bit[21:12]: event id value
|
|
* bit[11:0]: device id
|
|
*/
|
|
#define IRQ_EVENT_ID_SHIFT 12
|
|
#define IRQ_EVENT_ID_MASK 0x3ff
|
|
|
|
/* register range of each mbigen node */
|
|
#define MBIGEN_NODE_OFFSET 0x1000
|
|
|
|
/* offset of vector register in mbigen node */
|
|
#define REG_MBIGEN_VEC_OFFSET 0x200
|
|
|
|
/**
|
|
* offset of clear register in mbigen node
|
|
* This register is used to clear the status
|
|
* of interrupt
|
|
*/
|
|
#define REG_MBIGEN_CLEAR_OFFSET 0xa000
|
|
|
|
/**
|
|
* offset of interrupt type register
|
|
* This register is used to configure interrupt
|
|
* trigger type
|
|
*/
|
|
#define REG_MBIGEN_TYPE_OFFSET 0x0
|
|
|
|
/**
|
|
* struct mbigen_device - holds the information of mbigen device.
|
|
*
|
|
* @pdev: pointer to the platform device structure of mbigen chip.
|
|
* @base: mapped address of this mbigen chip.
|
|
*/
|
|
struct mbigen_device {
|
|
struct platform_device *pdev;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
|
|
{
|
|
unsigned int nid, pin;
|
|
|
|
hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
|
|
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
|
|
pin = hwirq % IRQS_PER_MBIGEN_NODE;
|
|
|
|
return pin * 4 + nid * MBIGEN_NODE_OFFSET
|
|
+ REG_MBIGEN_VEC_OFFSET;
|
|
}
|
|
|
|
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
|
|
u32 *mask, u32 *addr)
|
|
{
|
|
unsigned int nid, irq_ofst, ofst;
|
|
|
|
hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
|
|
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
|
|
irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE;
|
|
|
|
*mask = 1 << (irq_ofst % 32);
|
|
ofst = irq_ofst / 32 * 4;
|
|
|
|
*addr = ofst + nid * MBIGEN_NODE_OFFSET
|
|
+ REG_MBIGEN_TYPE_OFFSET;
|
|
}
|
|
|
|
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
|
|
u32 *mask, u32 *addr)
|
|
{
|
|
unsigned int ofst = (hwirq / 32) * 4;
|
|
|
|
*mask = 1 << (hwirq % 32);
|
|
*addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
|
|
}
|
|
|
|
static void mbigen_eoi_irq(struct irq_data *data)
|
|
{
|
|
void __iomem *base = data->chip_data;
|
|
u32 mask, addr;
|
|
|
|
get_mbigen_clear_reg(data->hwirq, &mask, &addr);
|
|
|
|
writel_relaxed(mask, base + addr);
|
|
|
|
irq_chip_eoi_parent(data);
|
|
}
|
|
|
|
static int mbigen_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
void __iomem *base = data->chip_data;
|
|
u32 mask, addr, val;
|
|
|
|
if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
get_mbigen_type_reg(data->hwirq, &mask, &addr);
|
|
|
|
val = readl_relaxed(base + addr);
|
|
|
|
if (type == IRQ_TYPE_LEVEL_HIGH)
|
|
val |= mask;
|
|
else
|
|
val &= ~mask;
|
|
|
|
writel_relaxed(val, base + addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip mbigen_irq_chip = {
|
|
.name = "mbigen-v2",
|
|
.irq_mask = irq_chip_mask_parent,
|
|
.irq_unmask = irq_chip_unmask_parent,
|
|
.irq_eoi = mbigen_eoi_irq,
|
|
.irq_set_type = mbigen_set_type,
|
|
.irq_set_affinity = irq_chip_set_affinity_parent,
|
|
};
|
|
|
|
static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
|
|
{
|
|
struct irq_data *d = irq_get_irq_data(desc->irq);
|
|
void __iomem *base = d->chip_data;
|
|
u32 val;
|
|
|
|
base += get_mbigen_vec_reg(d->hwirq);
|
|
val = readl_relaxed(base);
|
|
|
|
val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
|
|
val |= (msg->data << IRQ_EVENT_ID_SHIFT);
|
|
|
|
/* The address of doorbell is encoded in mbigen register by default
|
|
* So,we don't need to program the doorbell address at here
|
|
*/
|
|
writel_relaxed(val, base);
|
|
}
|
|
|
|
static int mbigen_domain_translate(struct irq_domain *d,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *hwirq,
|
|
unsigned int *type)
|
|
{
|
|
if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
|
|
if (fwspec->param_count != 2)
|
|
return -EINVAL;
|
|
|
|
if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) ||
|
|
(fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP))
|
|
return -EINVAL;
|
|
else
|
|
*hwirq = fwspec->param[0];
|
|
|
|
/* If there is no valid irq type, just use the default type */
|
|
if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) ||
|
|
(fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH))
|
|
*type = fwspec->param[1];
|
|
else
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mbigen_irq_domain_alloc(struct irq_domain *domain,
|
|
unsigned int virq,
|
|
unsigned int nr_irqs,
|
|
void *args)
|
|
{
|
|
struct irq_fwspec *fwspec = args;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type;
|
|
struct mbigen_device *mgn_chip;
|
|
int i, err;
|
|
|
|
err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
|
|
if (err)
|
|
return err;
|
|
|
|
err = platform_msi_domain_alloc(domain, virq, nr_irqs);
|
|
if (err)
|
|
return err;
|
|
|
|
mgn_chip = platform_msi_get_host_data(domain);
|
|
|
|
for (i = 0; i < nr_irqs; i++)
|
|
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
|
|
&mbigen_irq_chip, mgn_chip->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops mbigen_domain_ops = {
|
|
.translate = mbigen_domain_translate,
|
|
.alloc = mbigen_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_common,
|
|
};
|
|
|
|
static int mbigen_of_create_domain(struct platform_device *pdev,
|
|
struct mbigen_device *mgn_chip)
|
|
{
|
|
struct device *parent;
|
|
struct platform_device *child;
|
|
struct irq_domain *domain;
|
|
struct device_node *np;
|
|
u32 num_pins;
|
|
|
|
for_each_child_of_node(pdev->dev.of_node, np) {
|
|
if (!of_property_read_bool(np, "interrupt-controller"))
|
|
continue;
|
|
|
|
parent = platform_bus_type.dev_root;
|
|
child = of_platform_device_create(np, NULL, parent);
|
|
if (!child)
|
|
return -ENOMEM;
|
|
|
|
if (of_property_read_u32(child->dev.of_node, "num-pins",
|
|
&num_pins) < 0) {
|
|
dev_err(&pdev->dev, "No num-pins property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
domain = platform_msi_create_device_domain(&child->dev, num_pins,
|
|
mbigen_write_msg,
|
|
&mbigen_domain_ops,
|
|
mgn_chip);
|
|
if (!domain)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static int mbigen_acpi_create_domain(struct platform_device *pdev,
|
|
struct mbigen_device *mgn_chip)
|
|
{
|
|
struct irq_domain *domain;
|
|
u32 num_pins = 0;
|
|
int ret;
|
|
|
|
/*
|
|
* "num-pins" is the total number of interrupt pins implemented in
|
|
* this mbigen instance, and mbigen is an interrupt controller
|
|
* connected to ITS converting wired interrupts into MSI, so we
|
|
* use "num-pins" to alloc MSI vectors which are needed by client
|
|
* devices connected to it.
|
|
*
|
|
* Here is the DSDT device node used for mbigen in firmware:
|
|
* Device(MBI0) {
|
|
* Name(_HID, "HISI0152")
|
|
* Name(_UID, Zero)
|
|
* Name(_CRS, ResourceTemplate() {
|
|
* Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
|
|
* })
|
|
*
|
|
* Name(_DSD, Package () {
|
|
* ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
* Package () {
|
|
* Package () {"num-pins", 378}
|
|
* }
|
|
* })
|
|
* }
|
|
*/
|
|
ret = device_property_read_u32(&pdev->dev, "num-pins", &num_pins);
|
|
if (ret || num_pins == 0)
|
|
return -EINVAL;
|
|
|
|
domain = platform_msi_create_device_domain(&pdev->dev, num_pins,
|
|
mbigen_write_msg,
|
|
&mbigen_domain_ops,
|
|
mgn_chip);
|
|
if (!domain)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int mbigen_acpi_create_domain(struct platform_device *pdev,
|
|
struct mbigen_device *mgn_chip)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int mbigen_device_probe(struct platform_device *pdev)
|
|
{
|
|
struct mbigen_device *mgn_chip;
|
|
struct resource *res;
|
|
int err;
|
|
|
|
mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
|
|
if (!mgn_chip)
|
|
return -ENOMEM;
|
|
|
|
mgn_chip->pdev = pdev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -EINVAL;
|
|
|
|
mgn_chip->base = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!mgn_chip->base) {
|
|
dev_err(&pdev->dev, "failed to ioremap %pR\n", res);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
|
|
err = mbigen_of_create_domain(pdev, mgn_chip);
|
|
else if (ACPI_COMPANION(&pdev->dev))
|
|
err = mbigen_acpi_create_domain(pdev, mgn_chip);
|
|
else
|
|
err = -EINVAL;
|
|
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain",
|
|
mgn_chip->base);
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mgn_chip);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mbigen_of_match[] = {
|
|
{ .compatible = "hisilicon,mbigen-v2" },
|
|
{ /* END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mbigen_of_match);
|
|
|
|
static const struct acpi_device_id mbigen_acpi_match[] = {
|
|
{ "HISI0152", 0 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
|
|
|
|
static struct platform_driver mbigen_platform_driver = {
|
|
.driver = {
|
|
.name = "Hisilicon MBIGEN-V2",
|
|
.of_match_table = mbigen_of_match,
|
|
.acpi_match_table = ACPI_PTR(mbigen_acpi_match),
|
|
},
|
|
.probe = mbigen_device_probe,
|
|
};
|
|
|
|
module_platform_driver(mbigen_platform_driver);
|
|
|
|
MODULE_AUTHOR("Jun Ma <majun258@huawei.com>");
|
|
MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Hisilicon MBI Generator driver");
|