mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 21:55:10 +07:00
546f72e7ec
This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Andy Gross <agross@kernel.org>
581 lines
14 KiB
Plaintext
581 lines
14 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Qualcomm MSM8660";
|
|
compatible = "qcom,msm8660";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0>;
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,scorpion-mp-pmu";
|
|
interrupts = <1 9 0x304>;
|
|
};
|
|
|
|
clocks {
|
|
cxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
pxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* These channels from the ADC are simply hardware monitors.
|
|
* That is why the ADC is referred to as "HKADC" - HouseKeeping
|
|
* ADC.
|
|
*/
|
|
iio-hwmon {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&xoadc 0x00 0x01>, /* Battery */
|
|
<&xoadc 0x00 0x02>, /* DC in (charger) */
|
|
<&xoadc 0x00 0x04>, /* VPH the main system voltage */
|
|
<&xoadc 0x00 0x0b>, /* Die temperature */
|
|
<&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
|
|
<&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
|
|
<&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@2080000 {
|
|
compatible = "qcom,msm-8660-qgic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = < 0x02080000 0x1000 >,
|
|
< 0x02081000 0x1000 >;
|
|
};
|
|
|
|
timer@2000000 {
|
|
compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
interrupts = <1 0 0x301>,
|
|
<1 1 0x301>,
|
|
<1 2 0x301>;
|
|
reg = <0x02000000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x40000>;
|
|
};
|
|
|
|
tlmm: pinctrl@800000 {
|
|
compatible = "qcom,msm8660-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <0 16 0x4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-msm8660";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
reg = <0x900000 0x4000>;
|
|
};
|
|
|
|
gsbi6: gsbi@16500000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x16500000 0x100>;
|
|
clocks = <&gcc GSBI6_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi6_serial: serial@16540000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16540000 0x1000>,
|
|
<0x16500000 0x1000>;
|
|
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi6_i2c: i2c@16580000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x16580000 0x1000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi7: gsbi@16600000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x16600000 0x100>;
|
|
clocks = <&gcc GSBI7_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi7_serial: serial@16640000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16640000 0x1000>,
|
|
<0x16600000 0x1000>;
|
|
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi7_i2c: i2c@16680000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x16680000 0x1000>;
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi8: gsbi@19800000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19800000 0x100>;
|
|
clocks = <&gcc GSBI8_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi8_i2c: i2c@19880000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19880000 0x1000>;
|
|
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsbi12: gsbi@19c00000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19c00000 0x100>;
|
|
clocks = <&gcc GSBI12_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi12_serial: serial@19c40000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x19c40000 0x1000>,
|
|
<0x19c00000 0x1000>;
|
|
interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi12_i2c: i2c@19c80000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19c80000 0x1000>;
|
|
interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
external-bus@1a100000 {
|
|
compatible = "qcom,msm8660-ebi2";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0x1a800000 0x00800000>,
|
|
<1 0x0 0x1b000000 0x00800000>,
|
|
<2 0x0 0x1b800000 0x00800000>,
|
|
<3 0x0 0x1d000000 0x08000000>,
|
|
<4 0x0 0x1c800000 0x00800000>,
|
|
<5 0x0 0x1c000000 0x00800000>;
|
|
reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
|
|
reg-names = "ebi2", "xmem";
|
|
clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
|
|
clock-names = "ebi2x", "ebi2";
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pm8058: pmic@0 {
|
|
compatible = "qcom,pm8058";
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <88 8>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8058_gpio: gpio@150 {
|
|
compatible = "qcom,pm8058-gpio",
|
|
"qcom,ssbi-gpio";
|
|
reg = <0x150>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pm8058_gpio 0 0 44>;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
pm8058_mpps: mpps@50 {
|
|
compatible = "qcom,pm8058-mpp",
|
|
"qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts =
|
|
<128 IRQ_TYPE_NONE>,
|
|
<129 IRQ_TYPE_NONE>,
|
|
<130 IRQ_TYPE_NONE>,
|
|
<131 IRQ_TYPE_NONE>,
|
|
<132 IRQ_TYPE_NONE>,
|
|
<133 IRQ_TYPE_NONE>,
|
|
<134 IRQ_TYPE_NONE>,
|
|
<135 IRQ_TYPE_NONE>,
|
|
<136 IRQ_TYPE_NONE>,
|
|
<137 IRQ_TYPE_NONE>,
|
|
<138 IRQ_TYPE_NONE>,
|
|
<139 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8058-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|
|
|
|
keypad@148 {
|
|
compatible = "qcom,pm8058-keypad";
|
|
reg = <0x148>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <74 1>, <75 1>;
|
|
debounce = <15>;
|
|
scan-delay = <32>;
|
|
row-hold = <91500>;
|
|
};
|
|
|
|
xoadc: xoadc@197 {
|
|
compatible = "qcom,pm8058-adc";
|
|
reg = <0x197>;
|
|
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <2>;
|
|
|
|
vcoin: adc-channel@0 {
|
|
reg = <0x00 0x00>;
|
|
};
|
|
vbat: adc-channel@1 {
|
|
reg = <0x00 0x01>;
|
|
};
|
|
dcin: adc-channel@2 {
|
|
reg = <0x00 0x02>;
|
|
};
|
|
ichg: adc-channel@3 {
|
|
reg = <0x00 0x03>;
|
|
};
|
|
vph_pwr: adc-channel@4 {
|
|
reg = <0x00 0x04>;
|
|
};
|
|
usb_vbus: adc-channel@a {
|
|
reg = <0x00 0x0a>;
|
|
};
|
|
die_temp: adc-channel@b {
|
|
reg = <0x00 0x0b>;
|
|
};
|
|
ref_625mv: adc-channel@c {
|
|
reg = <0x00 0x0c>;
|
|
};
|
|
ref_1250mv: adc-channel@d {
|
|
reg = <0x00 0x0d>;
|
|
};
|
|
ref_325mv: adc-channel@e {
|
|
reg = <0x00 0x0e>;
|
|
};
|
|
ref_muxoff: adc-channel@f {
|
|
reg = <0x00 0x0f>;
|
|
};
|
|
};
|
|
|
|
rtc@1e8 {
|
|
compatible = "qcom,pm8058-rtc";
|
|
reg = <0x1e8>;
|
|
interrupt-parent = <&pm8058>;
|
|
interrupts = <39 1>;
|
|
allow-set-time;
|
|
};
|
|
|
|
vibrator@4a {
|
|
compatible = "qcom,pm8058-vib";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
};
|
|
|
|
l2cc: clock-controller@2082000 {
|
|
compatible = "syscon";
|
|
reg = <0x02082000 0x1000>;
|
|
};
|
|
|
|
rpm: rpm@104000 {
|
|
compatible = "qcom,rpm-msm8660";
|
|
reg = <0x00104000 0x1000>;
|
|
qcom,ipc = <&l2cc 0x8 2>;
|
|
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ack", "err", "wakeup";
|
|
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
|
|
clock-names = "ram";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8901-regulators {
|
|
compatible = "qcom,rpm-pm8901-regulators";
|
|
|
|
pm8901_l0: l0 {};
|
|
pm8901_l1: l1 {};
|
|
pm8901_l2: l2 {};
|
|
pm8901_l3: l3 {};
|
|
pm8901_l4: l4 {};
|
|
pm8901_l5: l5 {};
|
|
pm8901_l6: l6 {};
|
|
|
|
/* S0 and S1 Handled as SAW regulators by SPM */
|
|
pm8901_s2: s2 {};
|
|
pm8901_s3: s3 {};
|
|
pm8901_s4: s4 {};
|
|
|
|
pm8901_lvs0: lvs0 {};
|
|
pm8901_lvs1: lvs1 {};
|
|
pm8901_lvs2: lvs2 {};
|
|
pm8901_lvs3: lvs3 {};
|
|
|
|
pm8901_mvs: mvs {};
|
|
};
|
|
|
|
pm8058-regulators {
|
|
compatible = "qcom,rpm-pm8058-regulators";
|
|
|
|
pm8058_l0: l0 {};
|
|
pm8058_l1: l1 {};
|
|
pm8058_l2: l2 {};
|
|
pm8058_l3: l3 {};
|
|
pm8058_l4: l4 {};
|
|
pm8058_l5: l5 {};
|
|
pm8058_l6: l6 {};
|
|
pm8058_l7: l7 {};
|
|
pm8058_l8: l8 {};
|
|
pm8058_l9: l9 {};
|
|
pm8058_l10: l10 {};
|
|
pm8058_l11: l11 {};
|
|
pm8058_l12: l12 {};
|
|
pm8058_l13: l13 {};
|
|
pm8058_l14: l14 {};
|
|
pm8058_l15: l15 {};
|
|
pm8058_l16: l16 {};
|
|
pm8058_l17: l17 {};
|
|
pm8058_l18: l18 {};
|
|
pm8058_l19: l19 {};
|
|
pm8058_l20: l20 {};
|
|
pm8058_l21: l21 {};
|
|
pm8058_l22: l22 {};
|
|
pm8058_l23: l23 {};
|
|
pm8058_l24: l24 {};
|
|
pm8058_l25: l25 {};
|
|
|
|
pm8058_s0: s0 {};
|
|
pm8058_s1: s1 {};
|
|
pm8058_s2: s2 {};
|
|
pm8058_s3: s3 {};
|
|
pm8058_s4: s4 {};
|
|
|
|
pm8058_lvs0: lvs0 {};
|
|
pm8058_lvs1: lvs1 {};
|
|
|
|
pm8058_ncp: ncp {};
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x8000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc2: sdcc@12140000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12140000 0x8000>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x8000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
no-1-8-v;
|
|
};
|
|
|
|
sdcc4: sdcc@121c0000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x121c0000 0x8000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
max-frequency = <48000000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc5: sdcc@12200000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12200000 0x8000>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
tcsr: syscon@1a400000 {
|
|
compatible = "qcom,tcsr-msm8660", "syscon";
|
|
reg = <0x1a400000 0x100>;
|
|
};
|
|
};
|
|
|
|
};
|