mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
d2912cb15b
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
212 lines
5.4 KiB
C
212 lines
5.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mfd/imx25-tsadc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
static struct regmap_config mx25_tsadc_regmap_config = {
|
|
.fast_io = true,
|
|
.max_register = 8,
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
static void mx25_tsadc_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
u32 status;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
regmap_read(tsadc->regs, MX25_TSC_TGSR, &status);
|
|
|
|
if (status & MX25_TGSR_GCQ_INT)
|
|
generic_handle_irq(irq_find_mapping(tsadc->domain, 1));
|
|
|
|
if (status & MX25_TGSR_TCQ_INT)
|
|
generic_handle_irq(irq_find_mapping(tsadc->domain, 0));
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct mx25_tsadc *tsadc = d->host_data;
|
|
|
|
irq_set_chip_data(irq, tsadc);
|
|
irq_set_chip_and_handler(irq, &dummy_irq_chip,
|
|
handle_level_irq);
|
|
irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops mx25_tsadc_domain_ops = {
|
|
.map = mx25_tsadc_domain_map,
|
|
.xlate = irq_domain_xlate_onecell,
|
|
};
|
|
|
|
static int mx25_tsadc_setup_irq(struct platform_device *pdev,
|
|
struct mx25_tsadc *tsadc)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
int irq;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(dev, "Failed to get irq\n");
|
|
return irq;
|
|
}
|
|
|
|
tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
|
|
tsadc);
|
|
if (!tsadc->domain) {
|
|
dev_err(dev, "Failed to add irq domain\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
irq_set_chained_handler_and_data(irq, mx25_tsadc_irq_handler, tsadc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mx25_tsadc_setup_clk(struct platform_device *pdev,
|
|
struct mx25_tsadc *tsadc)
|
|
{
|
|
unsigned clk_div;
|
|
|
|
/*
|
|
* According to the datasheet the ADC clock should never
|
|
* exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses
|
|
* a funny clock divider. To keep the ADC conversion time constant
|
|
* adapt the ADC internal clock divider to the IPG clock rate.
|
|
*/
|
|
|
|
dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n",
|
|
clk_get_rate(tsadc->clk));
|
|
|
|
clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000);
|
|
dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div);
|
|
|
|
/* adc clock = IPG clock / (2 * div + 2) */
|
|
clk_div -= 2;
|
|
clk_div /= 2;
|
|
|
|
/*
|
|
* the ADC clock divider changes its behaviour when values below 4
|
|
* are used: it is fixed to "/ 10" in this case
|
|
*/
|
|
clk_div = max_t(unsigned, 4, clk_div);
|
|
|
|
dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n",
|
|
clk_get_rate(tsadc->clk) / (2 * clk_div + 2));
|
|
|
|
regmap_update_bits(tsadc->regs, MX25_TSC_TGCR,
|
|
MX25_TGCR_ADCCLKCFG(0x1f),
|
|
MX25_TGCR_ADCCLKCFG(clk_div));
|
|
}
|
|
|
|
static int mx25_tsadc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct mx25_tsadc *tsadc;
|
|
struct resource *res;
|
|
int ret;
|
|
void __iomem *iomem;
|
|
|
|
tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL);
|
|
if (!tsadc)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
iomem = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(iomem))
|
|
return PTR_ERR(iomem);
|
|
|
|
tsadc->regs = devm_regmap_init_mmio(dev, iomem,
|
|
&mx25_tsadc_regmap_config);
|
|
if (IS_ERR(tsadc->regs)) {
|
|
dev_err(dev, "Failed to initialize regmap\n");
|
|
return PTR_ERR(tsadc->regs);
|
|
}
|
|
|
|
tsadc->clk = devm_clk_get(dev, "ipg");
|
|
if (IS_ERR(tsadc->clk)) {
|
|
dev_err(dev, "Failed to get ipg clock\n");
|
|
return PTR_ERR(tsadc->clk);
|
|
}
|
|
|
|
/* setup clock according to the datasheet */
|
|
mx25_tsadc_setup_clk(pdev, tsadc);
|
|
|
|
/* Enable clock and reset the component */
|
|
regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
|
|
MX25_TGCR_CLK_EN);
|
|
regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
|
|
MX25_TGCR_TSC_RST);
|
|
|
|
/* Setup powersaving mode, but enable internal reference voltage */
|
|
regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
|
|
MX25_TGCR_POWERMODE_SAVE);
|
|
regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
|
|
MX25_TGCR_INTREFEN);
|
|
|
|
ret = mx25_tsadc_setup_irq(pdev, tsadc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, tsadc);
|
|
|
|
return devm_of_platform_populate(dev);
|
|
}
|
|
|
|
static int mx25_tsadc_remove(struct platform_device *pdev)
|
|
{
|
|
struct mx25_tsadc *tsadc = platform_get_drvdata(pdev);
|
|
int irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq) {
|
|
irq_set_chained_handler_and_data(irq, NULL, NULL);
|
|
irq_domain_remove(tsadc->domain);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mx25_tsadc_ids[] = {
|
|
{ .compatible = "fsl,imx25-tsadc" },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mx25_tsadc_ids);
|
|
|
|
static struct platform_driver mx25_tsadc_driver = {
|
|
.driver = {
|
|
.name = "mx25-tsadc",
|
|
.of_match_table = of_match_ptr(mx25_tsadc_ids),
|
|
},
|
|
.probe = mx25_tsadc_probe,
|
|
.remove = mx25_tsadc_remove,
|
|
};
|
|
module_platform_driver(mx25_tsadc_driver);
|
|
|
|
MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
|
|
MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:mx25-tsadc");
|