mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 03:46:38 +07:00
04f70e4ca4
devm_rtc_device_register() is device managed and makes cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
520 lines
13 KiB
C
520 lines
13 KiB
C
/*
|
|
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2010 Orex Computed Radiography
|
|
*/
|
|
|
|
/*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/* based on rtc-mc13892.c */
|
|
|
|
/*
|
|
* This driver uses the 47-bit 32 kHz counter in the Freescale DryIce block
|
|
* to implement a Linux RTC. Times and alarms are truncated to seconds.
|
|
* Since the RTC framework performs API locking via rtc->ops_lock the
|
|
* only simultaneous accesses we need to deal with is updating DryIce
|
|
* registers while servicing an alarm.
|
|
*
|
|
* Note that reading the DSR (DryIce Status Register) automatically clears
|
|
* the WCF (Write Complete Flag). All DryIce writes are synchronized to the
|
|
* LP (Low Power) domain and set the WCF upon completion. Writes to the
|
|
* DIER (DryIce Interrupt Enable Register) are the only exception. These
|
|
* occur at normal bus speeds and do not set WCF. Periodic interrupts are
|
|
* not supported by the hardware.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of.h>
|
|
|
|
/* DryIce Register Definitions */
|
|
|
|
#define DTCMR 0x00 /* Time Counter MSB Reg */
|
|
#define DTCLR 0x04 /* Time Counter LSB Reg */
|
|
|
|
#define DCAMR 0x08 /* Clock Alarm MSB Reg */
|
|
#define DCALR 0x0c /* Clock Alarm LSB Reg */
|
|
#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */
|
|
|
|
#define DCR 0x10 /* Control Reg */
|
|
#define DCR_TCE (1 << 3) /* Time Counter Enable */
|
|
|
|
#define DSR 0x14 /* Status Reg */
|
|
#define DSR_WBF (1 << 10) /* Write Busy Flag */
|
|
#define DSR_WNF (1 << 9) /* Write Next Flag */
|
|
#define DSR_WCF (1 << 8) /* Write Complete Flag */
|
|
#define DSR_WEF (1 << 7) /* Write Error Flag */
|
|
#define DSR_CAF (1 << 4) /* Clock Alarm Flag */
|
|
#define DSR_NVF (1 << 1) /* Non-Valid Flag */
|
|
#define DSR_SVF (1 << 0) /* Security Violation Flag */
|
|
|
|
#define DIER 0x18 /* Interrupt Enable Reg */
|
|
#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */
|
|
#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */
|
|
#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */
|
|
#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */
|
|
|
|
/**
|
|
* struct imxdi_dev - private imxdi rtc data
|
|
* @pdev: pionter to platform dev
|
|
* @rtc: pointer to rtc struct
|
|
* @ioaddr: IO registers pointer
|
|
* @irq: dryice normal interrupt
|
|
* @clk: input reference clock
|
|
* @dsr: copy of the DSR register
|
|
* @irq_lock: interrupt enable register (DIER) lock
|
|
* @write_wait: registers write complete queue
|
|
* @write_mutex: serialize registers write
|
|
* @work: schedule alarm work
|
|
*/
|
|
struct imxdi_dev {
|
|
struct platform_device *pdev;
|
|
struct rtc_device *rtc;
|
|
void __iomem *ioaddr;
|
|
int irq;
|
|
struct clk *clk;
|
|
u32 dsr;
|
|
spinlock_t irq_lock;
|
|
wait_queue_head_t write_wait;
|
|
struct mutex write_mutex;
|
|
struct work_struct work;
|
|
};
|
|
|
|
/*
|
|
* enable a dryice interrupt
|
|
*/
|
|
static void di_int_enable(struct imxdi_dev *imxdi, u32 intr)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imxdi->irq_lock, flags);
|
|
__raw_writel(__raw_readl(imxdi->ioaddr + DIER) | intr,
|
|
imxdi->ioaddr + DIER);
|
|
spin_unlock_irqrestore(&imxdi->irq_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* disable a dryice interrupt
|
|
*/
|
|
static void di_int_disable(struct imxdi_dev *imxdi, u32 intr)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imxdi->irq_lock, flags);
|
|
__raw_writel(__raw_readl(imxdi->ioaddr + DIER) & ~intr,
|
|
imxdi->ioaddr + DIER);
|
|
spin_unlock_irqrestore(&imxdi->irq_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* This function attempts to clear the dryice write-error flag.
|
|
*
|
|
* A dryice write error is similar to a bus fault and should not occur in
|
|
* normal operation. Clearing the flag requires another write, so the root
|
|
* cause of the problem may need to be fixed before the flag can be cleared.
|
|
*/
|
|
static void clear_write_error(struct imxdi_dev *imxdi)
|
|
{
|
|
int cnt;
|
|
|
|
dev_warn(&imxdi->pdev->dev, "WARNING: Register write error!\n");
|
|
|
|
/* clear the write error flag */
|
|
__raw_writel(DSR_WEF, imxdi->ioaddr + DSR);
|
|
|
|
/* wait for it to take effect */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
if ((__raw_readl(imxdi->ioaddr + DSR) & DSR_WEF) == 0)
|
|
return;
|
|
udelay(10);
|
|
}
|
|
dev_err(&imxdi->pdev->dev,
|
|
"ERROR: Cannot clear write-error flag!\n");
|
|
}
|
|
|
|
/*
|
|
* Write a dryice register and wait until it completes.
|
|
*
|
|
* This function uses interrupts to determine when the
|
|
* write has completed.
|
|
*/
|
|
static int di_write_wait(struct imxdi_dev *imxdi, u32 val, int reg)
|
|
{
|
|
int ret;
|
|
int rc = 0;
|
|
|
|
/* serialize register writes */
|
|
mutex_lock(&imxdi->write_mutex);
|
|
|
|
/* enable the write-complete interrupt */
|
|
di_int_enable(imxdi, DIER_WCIE);
|
|
|
|
imxdi->dsr = 0;
|
|
|
|
/* do the register write */
|
|
__raw_writel(val, imxdi->ioaddr + reg);
|
|
|
|
/* wait for the write to finish */
|
|
ret = wait_event_interruptible_timeout(imxdi->write_wait,
|
|
imxdi->dsr & (DSR_WCF | DSR_WEF), msecs_to_jiffies(1));
|
|
if (ret < 0) {
|
|
rc = ret;
|
|
goto out;
|
|
} else if (ret == 0) {
|
|
dev_warn(&imxdi->pdev->dev,
|
|
"Write-wait timeout "
|
|
"val = 0x%08x reg = 0x%08x\n", val, reg);
|
|
}
|
|
|
|
/* check for write error */
|
|
if (imxdi->dsr & DSR_WEF) {
|
|
clear_write_error(imxdi);
|
|
rc = -EIO;
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&imxdi->write_mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* read the seconds portion of the current time from the dryice time counter
|
|
*/
|
|
static int dryice_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct imxdi_dev *imxdi = dev_get_drvdata(dev);
|
|
unsigned long now;
|
|
|
|
now = __raw_readl(imxdi->ioaddr + DTCMR);
|
|
rtc_time_to_tm(now, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set the seconds portion of dryice time counter and clear the
|
|
* fractional part.
|
|
*/
|
|
static int dryice_rtc_set_mmss(struct device *dev, unsigned long secs)
|
|
{
|
|
struct imxdi_dev *imxdi = dev_get_drvdata(dev);
|
|
int rc;
|
|
|
|
/* zero the fractional part first */
|
|
rc = di_write_wait(imxdi, 0, DTCLR);
|
|
if (rc == 0)
|
|
rc = di_write_wait(imxdi, secs, DTCMR);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int dryice_rtc_alarm_irq_enable(struct device *dev,
|
|
unsigned int enabled)
|
|
{
|
|
struct imxdi_dev *imxdi = dev_get_drvdata(dev);
|
|
|
|
if (enabled)
|
|
di_int_enable(imxdi, DIER_CAIE);
|
|
else
|
|
di_int_disable(imxdi, DIER_CAIE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* read the seconds portion of the alarm register.
|
|
* the fractional part of the alarm register is always zero.
|
|
*/
|
|
static int dryice_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct imxdi_dev *imxdi = dev_get_drvdata(dev);
|
|
u32 dcamr;
|
|
|
|
dcamr = __raw_readl(imxdi->ioaddr + DCAMR);
|
|
rtc_time_to_tm(dcamr, &alarm->time);
|
|
|
|
/* alarm is enabled if the interrupt is enabled */
|
|
alarm->enabled = (__raw_readl(imxdi->ioaddr + DIER) & DIER_CAIE) != 0;
|
|
|
|
/* don't allow the DSR read to mess up DSR_WCF */
|
|
mutex_lock(&imxdi->write_mutex);
|
|
|
|
/* alarm is pending if the alarm flag is set */
|
|
alarm->pending = (__raw_readl(imxdi->ioaddr + DSR) & DSR_CAF) != 0;
|
|
|
|
mutex_unlock(&imxdi->write_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set the seconds portion of dryice alarm register
|
|
*/
|
|
static int dryice_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct imxdi_dev *imxdi = dev_get_drvdata(dev);
|
|
unsigned long now;
|
|
unsigned long alarm_time;
|
|
int rc;
|
|
|
|
rc = rtc_tm_to_time(&alarm->time, &alarm_time);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* don't allow setting alarm in the past */
|
|
now = __raw_readl(imxdi->ioaddr + DTCMR);
|
|
if (alarm_time < now)
|
|
return -EINVAL;
|
|
|
|
/* write the new alarm time */
|
|
rc = di_write_wait(imxdi, (u32)alarm_time, DCAMR);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (alarm->enabled)
|
|
di_int_enable(imxdi, DIER_CAIE); /* enable alarm intr */
|
|
else
|
|
di_int_disable(imxdi, DIER_CAIE); /* disable alarm intr */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct rtc_class_ops dryice_rtc_ops = {
|
|
.read_time = dryice_rtc_read_time,
|
|
.set_mmss = dryice_rtc_set_mmss,
|
|
.alarm_irq_enable = dryice_rtc_alarm_irq_enable,
|
|
.read_alarm = dryice_rtc_read_alarm,
|
|
.set_alarm = dryice_rtc_set_alarm,
|
|
};
|
|
|
|
/*
|
|
* dryice "normal" interrupt handler
|
|
*/
|
|
static irqreturn_t dryice_norm_irq(int irq, void *dev_id)
|
|
{
|
|
struct imxdi_dev *imxdi = dev_id;
|
|
u32 dsr, dier;
|
|
irqreturn_t rc = IRQ_NONE;
|
|
|
|
dier = __raw_readl(imxdi->ioaddr + DIER);
|
|
|
|
/* handle write complete and write error cases */
|
|
if ((dier & DIER_WCIE)) {
|
|
/*If the write wait queue is empty then there is no pending
|
|
operations. It means the interrupt is for DryIce -Security.
|
|
IRQ must be returned as none.*/
|
|
if (list_empty_careful(&imxdi->write_wait.task_list))
|
|
return rc;
|
|
|
|
/* DSR_WCF clears itself on DSR read */
|
|
dsr = __raw_readl(imxdi->ioaddr + DSR);
|
|
if ((dsr & (DSR_WCF | DSR_WEF))) {
|
|
/* mask the interrupt */
|
|
di_int_disable(imxdi, DIER_WCIE);
|
|
|
|
/* save the dsr value for the wait queue */
|
|
imxdi->dsr |= dsr;
|
|
|
|
wake_up_interruptible(&imxdi->write_wait);
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* handle the alarm case */
|
|
if ((dier & DIER_CAIE)) {
|
|
/* DSR_WCF clears itself on DSR read */
|
|
dsr = __raw_readl(imxdi->ioaddr + DSR);
|
|
if (dsr & DSR_CAF) {
|
|
/* mask the interrupt */
|
|
di_int_disable(imxdi, DIER_CAIE);
|
|
|
|
/* finish alarm in user context */
|
|
schedule_work(&imxdi->work);
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* post the alarm event from user context so it can sleep
|
|
* on the write completion.
|
|
*/
|
|
static void dryice_work(struct work_struct *work)
|
|
{
|
|
struct imxdi_dev *imxdi = container_of(work,
|
|
struct imxdi_dev, work);
|
|
|
|
/* dismiss the interrupt (ignore error) */
|
|
di_write_wait(imxdi, DSR_CAF, DSR);
|
|
|
|
/* pass the alarm event to the rtc framework. */
|
|
rtc_update_irq(imxdi->rtc, 1, RTC_AF | RTC_IRQF);
|
|
}
|
|
|
|
/*
|
|
* probe for dryice rtc device
|
|
*/
|
|
static int __init dryice_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct imxdi_dev *imxdi;
|
|
int rc;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
imxdi = devm_kzalloc(&pdev->dev, sizeof(*imxdi), GFP_KERNEL);
|
|
if (!imxdi)
|
|
return -ENOMEM;
|
|
|
|
imxdi->pdev = pdev;
|
|
|
|
if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
|
|
pdev->name))
|
|
return -EBUSY;
|
|
|
|
imxdi->ioaddr = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (imxdi->ioaddr == NULL)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&imxdi->irq_lock);
|
|
|
|
imxdi->irq = platform_get_irq(pdev, 0);
|
|
if (imxdi->irq < 0)
|
|
return imxdi->irq;
|
|
|
|
init_waitqueue_head(&imxdi->write_wait);
|
|
|
|
INIT_WORK(&imxdi->work, dryice_work);
|
|
|
|
mutex_init(&imxdi->write_mutex);
|
|
|
|
imxdi->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(imxdi->clk))
|
|
return PTR_ERR(imxdi->clk);
|
|
clk_prepare_enable(imxdi->clk);
|
|
|
|
/*
|
|
* Initialize dryice hardware
|
|
*/
|
|
|
|
/* mask all interrupts */
|
|
__raw_writel(0, imxdi->ioaddr + DIER);
|
|
|
|
rc = devm_request_irq(&pdev->dev, imxdi->irq, dryice_norm_irq,
|
|
IRQF_SHARED, pdev->name, imxdi);
|
|
if (rc) {
|
|
dev_warn(&pdev->dev, "interrupt not available.\n");
|
|
goto err;
|
|
}
|
|
|
|
/* put dryice into valid state */
|
|
if (__raw_readl(imxdi->ioaddr + DSR) & DSR_NVF) {
|
|
rc = di_write_wait(imxdi, DSR_NVF | DSR_SVF, DSR);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
/* initialize alarm */
|
|
rc = di_write_wait(imxdi, DCAMR_UNSET, DCAMR);
|
|
if (rc)
|
|
goto err;
|
|
rc = di_write_wait(imxdi, 0, DCALR);
|
|
if (rc)
|
|
goto err;
|
|
|
|
/* clear alarm flag */
|
|
if (__raw_readl(imxdi->ioaddr + DSR) & DSR_CAF) {
|
|
rc = di_write_wait(imxdi, DSR_CAF, DSR);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
/* the timer won't count if it has never been written to */
|
|
if (__raw_readl(imxdi->ioaddr + DTCMR) == 0) {
|
|
rc = di_write_wait(imxdi, 0, DTCMR);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
/* start keeping time */
|
|
if (!(__raw_readl(imxdi->ioaddr + DCR) & DCR_TCE)) {
|
|
rc = di_write_wait(imxdi,
|
|
__raw_readl(imxdi->ioaddr + DCR) | DCR_TCE,
|
|
DCR);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, imxdi);
|
|
imxdi->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&dryice_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(imxdi->rtc)) {
|
|
rc = PTR_ERR(imxdi->rtc);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
clk_disable_unprepare(imxdi->clk);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int __exit dryice_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct imxdi_dev *imxdi = platform_get_drvdata(pdev);
|
|
|
|
flush_work(&imxdi->work);
|
|
|
|
/* mask all interrupts */
|
|
__raw_writel(0, imxdi->ioaddr + DIER);
|
|
|
|
clk_disable_unprepare(imxdi->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id dryice_dt_ids[] = {
|
|
{ .compatible = "fsl,imx25-rtc" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, dryice_dt_ids);
|
|
#endif
|
|
|
|
static struct platform_driver dryice_rtc_driver = {
|
|
.driver = {
|
|
.name = "imxdi_rtc",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(dryice_dt_ids),
|
|
},
|
|
.remove = __exit_p(dryice_rtc_remove),
|
|
};
|
|
|
|
module_platform_driver_probe(dryice_rtc_driver, dryice_rtc_probe);
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
|
|
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
|
|
MODULE_DESCRIPTION("IMX DryIce Realtime Clock Driver (RTC)");
|
|
MODULE_LICENSE("GPL");
|