linux_dsm_epyc7002/drivers/clk/meson/clk-audio-divider.c
Jerome Brunet 7813c14c94 clk: meson: audio-divider is one based
The audio divider is one based. This offset was mistakenly dropped from
recalc_rate() when migrating to clk_regmap.

Fixes: 88a4e12836 ("clk: meson: migrate the audio divider clock to clk_regmap")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-21 10:10:50 +02:00

111 lines
3.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 AmLogic, Inc.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
/*
* i2s master clock divider: The algorithm of the generic clk-divider used with
* a very precise clock parent such as the mpll tends to select a low divider
* factor. This gives poor results with this particular divider, especially with
* high frequencies (> 100 MHz)
*
* This driver try to select the maximum possible divider with the rate the
* upstream clock can provide.
*/
#include <linux/clk-provider.h>
#include "clkc.h"
static inline struct meson_clk_audio_div_data *
meson_clk_audio_div_data(struct clk_regmap *clk)
{
return (struct meson_clk_audio_div_data *)clk->data;
}
static int _div_round(unsigned long parent_rate, unsigned long rate,
unsigned long flags)
{
if (flags & CLK_DIVIDER_ROUND_CLOSEST)
return DIV_ROUND_CLOSEST_ULL((u64)parent_rate, rate);
return DIV_ROUND_UP_ULL((u64)parent_rate, rate);
}
static int _get_val(unsigned long parent_rate, unsigned long rate)
{
return DIV_ROUND_UP_ULL((u64)parent_rate, rate) - 1;
}
static int _valid_divider(unsigned int width, int divider)
{
int max_divider = 1 << width;
return clamp(divider, 1, max_divider);
}
static unsigned long audio_divider_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk);
unsigned long divider;
divider = meson_parm_read(clk->map, &adiv->div) + 1;
return DIV_ROUND_UP_ULL((u64)parent_rate, divider);
}
static long audio_divider_round_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk);
unsigned long max_prate;
int divider;
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
divider = _div_round(*parent_rate, rate, adiv->flags);
divider = _valid_divider(adiv->div.width, divider);
return DIV_ROUND_UP_ULL((u64)*parent_rate, divider);
}
/* Get the maximum parent rate */
max_prate = clk_hw_round_rate(clk_hw_get_parent(hw), ULONG_MAX);
/* Get the corresponding rounded down divider */
divider = max_prate / rate;
divider = _valid_divider(adiv->div.width, divider);
/* Get actual rate of the parent */
*parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
divider * rate);
return DIV_ROUND_UP_ULL((u64)*parent_rate, divider);
}
static int audio_divider_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk);
int val = _get_val(parent_rate, rate);
meson_parm_write(clk->map, &adiv->div, val);
return 0;
}
const struct clk_ops meson_clk_audio_divider_ro_ops = {
.recalc_rate = audio_divider_recalc_rate,
.round_rate = audio_divider_round_rate,
};
const struct clk_ops meson_clk_audio_divider_ops = {
.recalc_rate = audio_divider_recalc_rate,
.round_rate = audio_divider_round_rate,
.set_rate = audio_divider_set_rate,
};