mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 23:40:55 +07:00
cf61fdb944
The struct fhci_regs (in drivers/usb/host/fhci.h) is basically a redefinition of the struct qe_usb_ctlr (in arch/powerpc/include/asm/immap_qe.h). The qe_usb_ctlr struct is preferrable once it uses accurately the registers' names found in the Freescale's QUICC Engine Block Reference Manuals (QEIWRM.pdf Rev.4.4 Chapter 19 for MPC836xE series and MPC8323ERM.pdf Rev.2 Chapter 36 for MPC832xE series), making easier to map the FHCI device driver to the hardware manual. Also, as the FHCI driver uses the USB Controller registers, the name qe_usb_ctlr is a more precise representation of the hardware than fhci_regs. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
834 lines
19 KiB
C
834 lines
19 KiB
C
/*
|
|
* Freescale QUICC Engine USB Host Controller Driver
|
|
*
|
|
* Copyright (c) Freescale Semicondutor, Inc. 2006.
|
|
* Shlomi Gridish <gridish@freescale.com>
|
|
* Jerry Huang <Chang-Ming.Huang@freescale.com>
|
|
* Copyright (c) Logic Product Development, Inc. 2007
|
|
* Peter Barada <peterb@logicpd.com>
|
|
* Copyright (c) MontaVista Software, Inc. 2008.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/qe.h>
|
|
#include <asm/fsl_gtm.h>
|
|
#include "fhci.h"
|
|
|
|
void fhci_start_sof_timer(struct fhci_hcd *fhci)
|
|
{
|
|
fhci_dbg(fhci, "-> %s\n", __func__);
|
|
|
|
/* clear frame_n */
|
|
out_be16(&fhci->pram->frame_num, 0);
|
|
|
|
out_be16(&fhci->regs->usb_ussft, 0);
|
|
setbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE);
|
|
|
|
fhci_dbg(fhci, "<- %s\n", __func__);
|
|
}
|
|
|
|
void fhci_stop_sof_timer(struct fhci_hcd *fhci)
|
|
{
|
|
fhci_dbg(fhci, "-> %s\n", __func__);
|
|
|
|
clrbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE);
|
|
gtm_stop_timer16(fhci->timer);
|
|
|
|
fhci_dbg(fhci, "<- %s\n", __func__);
|
|
}
|
|
|
|
u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
|
|
{
|
|
return be16_to_cpu(in_be16(&usb->fhci->regs->usb_ussft) / 12);
|
|
}
|
|
|
|
/* initialize the endpoint zero */
|
|
static u32 endpoint_zero_init(struct fhci_usb *usb,
|
|
enum fhci_mem_alloc data_mem,
|
|
u32 ring_len)
|
|
{
|
|
u32 rc;
|
|
|
|
rc = fhci_create_ep(usb, data_mem, ring_len);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* inilialize endpoint registers */
|
|
fhci_init_ep_registers(usb, usb->ep0, data_mem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* enable the USB interrupts */
|
|
void fhci_usb_enable_interrupt(struct fhci_usb *usb)
|
|
{
|
|
struct fhci_hcd *fhci = usb->fhci;
|
|
|
|
if (usb->intr_nesting_cnt == 1) {
|
|
/* initialize the USB interrupt */
|
|
enable_irq(fhci_to_hcd(fhci)->irq);
|
|
|
|
/* initialize the event register and mask register */
|
|
out_be16(&usb->fhci->regs->usb_usber, 0xffff);
|
|
out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
|
|
|
|
/* enable the timer interrupts */
|
|
enable_irq(fhci->timer->irq);
|
|
} else if (usb->intr_nesting_cnt > 1)
|
|
fhci_info(fhci, "unbalanced USB interrupts nesting\n");
|
|
usb->intr_nesting_cnt--;
|
|
}
|
|
|
|
/* disable the usb interrupt */
|
|
void fhci_usb_disable_interrupt(struct fhci_usb *usb)
|
|
{
|
|
struct fhci_hcd *fhci = usb->fhci;
|
|
|
|
if (usb->intr_nesting_cnt == 0) {
|
|
/* disable the timer interrupt */
|
|
disable_irq_nosync(fhci->timer->irq);
|
|
|
|
/* disable the usb interrupt */
|
|
disable_irq_nosync(fhci_to_hcd(fhci)->irq);
|
|
out_be16(&usb->fhci->regs->usb_usbmr, 0);
|
|
}
|
|
usb->intr_nesting_cnt++;
|
|
}
|
|
|
|
/* enable the USB controller */
|
|
static u32 fhci_usb_enable(struct fhci_hcd *fhci)
|
|
{
|
|
struct fhci_usb *usb = fhci->usb_lld;
|
|
|
|
out_be16(&usb->fhci->regs->usb_usber, 0xffff);
|
|
out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk);
|
|
setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN);
|
|
|
|
mdelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* disable the USB controller */
|
|
static u32 fhci_usb_disable(struct fhci_hcd *fhci)
|
|
{
|
|
struct fhci_usb *usb = fhci->usb_lld;
|
|
|
|
fhci_usb_disable_interrupt(usb);
|
|
fhci_port_disable(fhci);
|
|
|
|
/* disable the usb controller */
|
|
if (usb->port_status == FHCI_PORT_FULL ||
|
|
usb->port_status == FHCI_PORT_LOW)
|
|
fhci_device_disconnected_interrupt(fhci);
|
|
|
|
clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* check the bus state by polling the QE bit on the IO ports */
|
|
int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
|
|
{
|
|
u8 bits = 0;
|
|
|
|
/* check USBOE,if transmitting,exit */
|
|
if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
|
|
return -1;
|
|
|
|
/* check USBRP */
|
|
if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
|
|
bits |= 0x2;
|
|
|
|
/* check USBRN */
|
|
if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
|
|
bits |= 0x1;
|
|
|
|
return bits;
|
|
}
|
|
|
|
static void fhci_mem_free(struct fhci_hcd *fhci)
|
|
{
|
|
struct ed *ed;
|
|
struct ed *next_ed;
|
|
struct td *td;
|
|
struct td *next_td;
|
|
|
|
list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
|
|
list_del(&ed->node);
|
|
kfree(ed);
|
|
}
|
|
|
|
list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
|
|
list_del(&td->node);
|
|
kfree(td);
|
|
}
|
|
|
|
kfree(fhci->vroot_hub);
|
|
fhci->vroot_hub = NULL;
|
|
|
|
kfree(fhci->hc_list);
|
|
fhci->hc_list = NULL;
|
|
}
|
|
|
|
static int fhci_mem_init(struct fhci_hcd *fhci)
|
|
{
|
|
int i;
|
|
|
|
fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
|
|
if (!fhci->hc_list)
|
|
goto err;
|
|
|
|
INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
|
|
INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
|
|
INIT_LIST_HEAD(&fhci->hc_list->iso_list);
|
|
INIT_LIST_HEAD(&fhci->hc_list->intr_list);
|
|
INIT_LIST_HEAD(&fhci->hc_list->done_list);
|
|
|
|
fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
|
|
if (!fhci->vroot_hub)
|
|
goto err;
|
|
|
|
INIT_LIST_HEAD(&fhci->empty_eds);
|
|
INIT_LIST_HEAD(&fhci->empty_tds);
|
|
|
|
/* initialize work queue to handle done list */
|
|
fhci_tasklet.data = (unsigned long)fhci;
|
|
fhci->process_done_task = &fhci_tasklet;
|
|
|
|
for (i = 0; i < MAX_TDS; i++) {
|
|
struct td *td;
|
|
|
|
td = kmalloc(sizeof(*td), GFP_KERNEL);
|
|
if (!td)
|
|
goto err;
|
|
fhci_recycle_empty_td(fhci, td);
|
|
}
|
|
for (i = 0; i < MAX_EDS; i++) {
|
|
struct ed *ed;
|
|
|
|
ed = kmalloc(sizeof(*ed), GFP_KERNEL);
|
|
if (!ed)
|
|
goto err;
|
|
fhci_recycle_empty_ed(fhci, ed);
|
|
}
|
|
|
|
fhci->active_urbs = 0;
|
|
return 0;
|
|
err:
|
|
fhci_mem_free(fhci);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* destroy the fhci_usb structure */
|
|
static void fhci_usb_free(void *lld)
|
|
{
|
|
struct fhci_usb *usb = lld;
|
|
struct fhci_hcd *fhci;
|
|
|
|
if (usb) {
|
|
fhci = usb->fhci;
|
|
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
|
|
fhci_ep0_free(usb);
|
|
kfree(usb->actual_frame);
|
|
kfree(usb);
|
|
}
|
|
}
|
|
|
|
/* initialize the USB */
|
|
static int fhci_usb_init(struct fhci_hcd *fhci)
|
|
{
|
|
struct fhci_usb *usb = fhci->usb_lld;
|
|
|
|
memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
|
|
|
|
usb->port_status = FHCI_PORT_DISABLED;
|
|
usb->max_frame_usage = FRAME_TIME_USAGE;
|
|
usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
|
|
|
|
usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
|
|
if (!usb->actual_frame) {
|
|
fhci_usb_free(usb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&usb->actual_frame->tds_list);
|
|
|
|
/* initializing registers on chip, clear frame number */
|
|
out_be16(&fhci->pram->frame_num, 0);
|
|
|
|
/* clear rx state */
|
|
out_be32(&fhci->pram->rx_state, 0);
|
|
|
|
/* set mask register */
|
|
usb->saved_msk = (USB_E_TXB_MASK |
|
|
USB_E_TXE1_MASK |
|
|
USB_E_IDLE_MASK |
|
|
USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
|
|
|
|
out_8(&usb->fhci->regs->usb_usmod, USB_MODE_HOST | USB_MODE_EN);
|
|
|
|
/* clearing the mask register */
|
|
out_be16(&usb->fhci->regs->usb_usbmr, 0);
|
|
|
|
/* initialing the event register */
|
|
out_be16(&usb->fhci->regs->usb_usber, 0xffff);
|
|
|
|
if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
|
|
fhci_usb_free(usb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* initialize the fhci_usb struct and the corresponding data staruct */
|
|
static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
|
|
{
|
|
struct fhci_usb *usb;
|
|
|
|
/* allocate memory for SCC data structure */
|
|
usb = kzalloc(sizeof(*usb), GFP_KERNEL);
|
|
if (!usb) {
|
|
fhci_err(fhci, "no memory for SCC data struct\n");
|
|
return NULL;
|
|
}
|
|
|
|
usb->fhci = fhci;
|
|
usb->hc_list = fhci->hc_list;
|
|
usb->vroot_hub = fhci->vroot_hub;
|
|
|
|
usb->transfer_confirm = fhci_transfer_confirm_callback;
|
|
|
|
return usb;
|
|
}
|
|
|
|
static int fhci_start(struct usb_hcd *hcd)
|
|
{
|
|
int ret;
|
|
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
|
|
|
|
ret = fhci_mem_init(fhci);
|
|
if (ret) {
|
|
fhci_err(fhci, "failed to allocate memory\n");
|
|
goto err;
|
|
}
|
|
|
|
fhci->usb_lld = fhci_create_lld(fhci);
|
|
if (!fhci->usb_lld) {
|
|
fhci_err(fhci, "low level driver config failed\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
ret = fhci_usb_init(fhci);
|
|
if (ret) {
|
|
fhci_err(fhci, "low level driver initialize failed\n");
|
|
goto err;
|
|
}
|
|
|
|
spin_lock_init(&fhci->lock);
|
|
|
|
/* connect the virtual root hub */
|
|
fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */
|
|
fhci->vroot_hub->hub.wHubStatus = 0;
|
|
fhci->vroot_hub->hub.wHubChange = 0;
|
|
fhci->vroot_hub->port.wPortStatus = 0;
|
|
fhci->vroot_hub->port.wPortChange = 0;
|
|
|
|
hcd->state = HC_STATE_RUNNING;
|
|
|
|
/*
|
|
* From here on, khubd concurrently accesses the root
|
|
* hub; drivers will be talking to enumerated devices.
|
|
* (On restart paths, khubd already knows about the root
|
|
* hub and could find work as soon as we wrote FLAG_CF.)
|
|
*
|
|
* Before this point the HC was idle/ready. After, khubd
|
|
* and device drivers may start it running.
|
|
*/
|
|
fhci_usb_enable(fhci);
|
|
return 0;
|
|
err:
|
|
fhci_mem_free(fhci);
|
|
return ret;
|
|
}
|
|
|
|
static void fhci_stop(struct usb_hcd *hcd)
|
|
{
|
|
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
|
|
|
|
fhci_usb_disable_interrupt(fhci->usb_lld);
|
|
fhci_usb_disable(fhci);
|
|
|
|
fhci_usb_free(fhci->usb_lld);
|
|
fhci->usb_lld = NULL;
|
|
fhci_mem_free(fhci);
|
|
}
|
|
|
|
static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
|
|
gfp_t mem_flags)
|
|
{
|
|
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
|
|
u32 pipe = urb->pipe;
|
|
int ret;
|
|
int i;
|
|
int size = 0;
|
|
struct urb_priv *urb_priv;
|
|
unsigned long flags;
|
|
|
|
switch (usb_pipetype(pipe)) {
|
|
case PIPE_CONTROL:
|
|
/* 1 td fro setup,1 for ack */
|
|
size = 2;
|
|
case PIPE_BULK:
|
|
/* one td for every 4096 bytes(can be up to 8k) */
|
|
size += urb->transfer_buffer_length / 4096;
|
|
/* ...add for any remaining bytes... */
|
|
if ((urb->transfer_buffer_length % 4096) != 0)
|
|
size++;
|
|
/* ..and maybe a zero length packet to wrap it up */
|
|
if (size == 0)
|
|
size++;
|
|
else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
|
|
&& (urb->transfer_buffer_length
|
|
% usb_maxpacket(urb->dev, pipe,
|
|
usb_pipeout(pipe))) != 0)
|
|
size++;
|
|
break;
|
|
case PIPE_ISOCHRONOUS:
|
|
size = urb->number_of_packets;
|
|
if (size <= 0)
|
|
return -EINVAL;
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
urb->iso_frame_desc[i].actual_length = 0;
|
|
urb->iso_frame_desc[i].status = (u32) (-EXDEV);
|
|
}
|
|
break;
|
|
case PIPE_INTERRUPT:
|
|
size = 1;
|
|
}
|
|
|
|
/* allocate the private part of the URB */
|
|
urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
|
|
if (!urb_priv)
|
|
return -ENOMEM;
|
|
|
|
/* allocate the private part of the URB */
|
|
urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags);
|
|
if (!urb_priv->tds) {
|
|
kfree(urb_priv);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_irqsave(&fhci->lock, flags);
|
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* fill the private part of the URB */
|
|
urb_priv->num_of_tds = size;
|
|
|
|
urb->status = -EINPROGRESS;
|
|
urb->actual_length = 0;
|
|
urb->error_count = 0;
|
|
urb->hcpriv = urb_priv;
|
|
|
|
fhci_queue_urb(fhci, urb);
|
|
err:
|
|
if (ret) {
|
|
kfree(urb_priv->tds);
|
|
kfree(urb_priv);
|
|
}
|
|
spin_unlock_irqrestore(&fhci->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/* dequeue FHCI URB */
|
|
static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
{
|
|
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
|
|
struct fhci_usb *usb = fhci->usb_lld;
|
|
int ret = -EINVAL;
|
|
unsigned long flags;
|
|
|
|
if (!urb || !urb->dev || !urb->dev->bus)
|
|
goto out;
|
|
|
|
spin_lock_irqsave(&fhci->lock, flags);
|
|
|
|
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
|
|
if (ret)
|
|
goto out2;
|
|
|
|
if (usb->port_status != FHCI_PORT_DISABLED) {
|
|
struct urb_priv *urb_priv;
|
|
|
|
/*
|
|
* flag the urb's data for deletion in some upcoming
|
|
* SF interrupt's delete list processing
|
|
*/
|
|
urb_priv = urb->hcpriv;
|
|
|
|
if (!urb_priv || (urb_priv->state == URB_DEL))
|
|
goto out2;
|
|
|
|
urb_priv->state = URB_DEL;
|
|
|
|
/* already pending? */
|
|
urb_priv->ed->state = FHCI_ED_URB_DEL;
|
|
} else {
|
|
fhci_urb_complete_free(fhci, urb);
|
|
}
|
|
|
|
out2:
|
|
spin_unlock_irqrestore(&fhci->lock, flags);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void fhci_endpoint_disable(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct fhci_hcd *fhci;
|
|
struct ed *ed;
|
|
unsigned long flags;
|
|
|
|
fhci = hcd_to_fhci(hcd);
|
|
spin_lock_irqsave(&fhci->lock, flags);
|
|
ed = ep->hcpriv;
|
|
if (ed) {
|
|
while (ed->td_head != NULL) {
|
|
struct td *td = fhci_remove_td_from_ed(ed);
|
|
fhci_urb_complete_free(fhci, td->urb);
|
|
}
|
|
fhci_recycle_empty_ed(fhci, ed);
|
|
ep->hcpriv = NULL;
|
|
}
|
|
spin_unlock_irqrestore(&fhci->lock, flags);
|
|
}
|
|
|
|
static int fhci_get_frame_number(struct usb_hcd *hcd)
|
|
{
|
|
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
|
|
|
|
return get_frame_num(fhci);
|
|
}
|
|
|
|
static const struct hc_driver fhci_driver = {
|
|
.description = "fsl,usb-fhci",
|
|
.product_desc = "FHCI HOST Controller",
|
|
.hcd_priv_size = sizeof(struct fhci_hcd),
|
|
|
|
/* generic hardware linkage */
|
|
.irq = fhci_irq,
|
|
.flags = HCD_USB11 | HCD_MEMORY,
|
|
|
|
/* basic lifecycle operation */
|
|
.start = fhci_start,
|
|
.stop = fhci_stop,
|
|
|
|
/* managing i/o requests and associated device resources */
|
|
.urb_enqueue = fhci_urb_enqueue,
|
|
.urb_dequeue = fhci_urb_dequeue,
|
|
.endpoint_disable = fhci_endpoint_disable,
|
|
|
|
/* scheduling support */
|
|
.get_frame_number = fhci_get_frame_number,
|
|
|
|
/* root hub support */
|
|
.hub_status_data = fhci_hub_status_data,
|
|
.hub_control = fhci_hub_control,
|
|
};
|
|
|
|
static int __devinit of_fhci_probe(struct platform_device *ofdev)
|
|
{
|
|
struct device *dev = &ofdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct usb_hcd *hcd;
|
|
struct fhci_hcd *fhci;
|
|
struct resource usb_regs;
|
|
unsigned long pram_addr;
|
|
unsigned int usb_irq;
|
|
const char *sprop;
|
|
const u32 *iprop;
|
|
int size;
|
|
int ret;
|
|
int i;
|
|
int j;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
sprop = of_get_property(node, "mode", NULL);
|
|
if (sprop && strcmp(sprop, "host"))
|
|
return -ENODEV;
|
|
|
|
hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev));
|
|
if (!hcd) {
|
|
dev_err(dev, "could not create hcd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
fhci = hcd_to_fhci(hcd);
|
|
hcd->self.controller = dev;
|
|
dev_set_drvdata(dev, hcd);
|
|
|
|
iprop = of_get_property(node, "hub-power-budget", &size);
|
|
if (iprop && size == sizeof(*iprop))
|
|
hcd->power_budget = *iprop;
|
|
|
|
/* FHCI registers. */
|
|
ret = of_address_to_resource(node, 0, &usb_regs);
|
|
if (ret) {
|
|
dev_err(dev, "could not get regs\n");
|
|
goto err_regs;
|
|
}
|
|
|
|
hcd->regs = ioremap(usb_regs.start, resource_size(&usb_regs));
|
|
if (!hcd->regs) {
|
|
dev_err(dev, "could not ioremap regs\n");
|
|
ret = -ENOMEM;
|
|
goto err_regs;
|
|
}
|
|
fhci->regs = hcd->regs;
|
|
|
|
/* Parameter RAM. */
|
|
iprop = of_get_property(node, "reg", &size);
|
|
if (!iprop || size < sizeof(*iprop) * 4) {
|
|
dev_err(dev, "can't get pram offset\n");
|
|
ret = -EINVAL;
|
|
goto err_pram;
|
|
}
|
|
|
|
pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64);
|
|
if (IS_ERR_VALUE(pram_addr)) {
|
|
dev_err(dev, "failed to allocate usb pram\n");
|
|
ret = -ENOMEM;
|
|
goto err_pram;
|
|
}
|
|
|
|
qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB,
|
|
QE_CR_PROTOCOL_UNSPECIFIED, pram_addr);
|
|
fhci->pram = cpm_muram_addr(pram_addr);
|
|
|
|
/* GPIOs and pins */
|
|
for (i = 0; i < NUM_GPIOS; i++) {
|
|
int gpio;
|
|
enum of_gpio_flags flags;
|
|
|
|
gpio = of_get_gpio_flags(node, i, &flags);
|
|
fhci->gpios[i] = gpio;
|
|
fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
|
|
|
|
if (!gpio_is_valid(gpio)) {
|
|
if (i < GPIO_SPEED) {
|
|
dev_err(dev, "incorrect GPIO%d: %d\n",
|
|
i, gpio);
|
|
goto err_gpios;
|
|
} else {
|
|
dev_info(dev, "assuming board doesn't have "
|
|
"%s gpio\n", i == GPIO_SPEED ?
|
|
"speed" : "power");
|
|
continue;
|
|
}
|
|
}
|
|
|
|
ret = gpio_request(gpio, dev_name(dev));
|
|
if (ret) {
|
|
dev_err(dev, "failed to request gpio %d", i);
|
|
goto err_gpios;
|
|
}
|
|
|
|
if (i >= GPIO_SPEED) {
|
|
ret = gpio_direction_output(gpio, 0);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set gpio %d as "
|
|
"an output\n", i);
|
|
i++;
|
|
goto err_gpios;
|
|
}
|
|
}
|
|
}
|
|
|
|
for (j = 0; j < NUM_PINS; j++) {
|
|
fhci->pins[j] = qe_pin_request(node, j);
|
|
if (IS_ERR(fhci->pins[j])) {
|
|
ret = PTR_ERR(fhci->pins[j]);
|
|
dev_err(dev, "can't get pin %d: %d\n", j, ret);
|
|
goto err_pins;
|
|
}
|
|
}
|
|
|
|
/* Frame limit timer and its interrupt. */
|
|
fhci->timer = gtm_get_timer16();
|
|
if (IS_ERR(fhci->timer)) {
|
|
ret = PTR_ERR(fhci->timer);
|
|
dev_err(dev, "failed to request qe timer: %i", ret);
|
|
goto err_get_timer;
|
|
}
|
|
|
|
ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
|
|
0, "qe timer (usb)", hcd);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request timer irq");
|
|
goto err_timer_irq;
|
|
}
|
|
|
|
/* USB Host interrupt. */
|
|
usb_irq = irq_of_parse_and_map(node, 0);
|
|
if (usb_irq == NO_IRQ) {
|
|
dev_err(dev, "could not get usb irq\n");
|
|
ret = -EINVAL;
|
|
goto err_usb_irq;
|
|
}
|
|
|
|
/* Clocks. */
|
|
sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
|
|
if (sprop) {
|
|
fhci->fullspeed_clk = qe_clock_source(sprop);
|
|
if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
|
|
dev_err(dev, "wrong fullspeed-clock\n");
|
|
ret = -EINVAL;
|
|
goto err_clocks;
|
|
}
|
|
}
|
|
|
|
sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
|
|
if (sprop) {
|
|
fhci->lowspeed_clk = qe_clock_source(sprop);
|
|
if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
|
|
dev_err(dev, "wrong lowspeed-clock\n");
|
|
ret = -EINVAL;
|
|
goto err_clocks;
|
|
}
|
|
}
|
|
|
|
if (fhci->fullspeed_clk == QE_CLK_NONE &&
|
|
fhci->lowspeed_clk == QE_CLK_NONE) {
|
|
dev_err(dev, "no clocks specified\n");
|
|
ret = -EINVAL;
|
|
goto err_clocks;
|
|
}
|
|
|
|
dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
|
|
|
|
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
|
|
|
|
/* Start with full-speed, if possible. */
|
|
if (fhci->fullspeed_clk != QE_CLK_NONE) {
|
|
fhci_config_transceiver(fhci, FHCI_PORT_FULL);
|
|
qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
|
|
} else {
|
|
fhci_config_transceiver(fhci, FHCI_PORT_LOW);
|
|
qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
|
|
}
|
|
|
|
/* Clear and disable any pending interrupts. */
|
|
out_be16(&fhci->regs->usb_usber, 0xffff);
|
|
out_be16(&fhci->regs->usb_usbmr, 0);
|
|
|
|
ret = usb_add_hcd(hcd, usb_irq, 0);
|
|
if (ret < 0)
|
|
goto err_add_hcd;
|
|
|
|
fhci_dfs_create(fhci);
|
|
|
|
return 0;
|
|
|
|
err_add_hcd:
|
|
err_clocks:
|
|
irq_dispose_mapping(usb_irq);
|
|
err_usb_irq:
|
|
free_irq(fhci->timer->irq, hcd);
|
|
err_timer_irq:
|
|
gtm_put_timer16(fhci->timer);
|
|
err_get_timer:
|
|
err_pins:
|
|
while (--j >= 0)
|
|
qe_pin_free(fhci->pins[j]);
|
|
err_gpios:
|
|
while (--i >= 0) {
|
|
if (gpio_is_valid(fhci->gpios[i]))
|
|
gpio_free(fhci->gpios[i]);
|
|
}
|
|
cpm_muram_free(pram_addr);
|
|
err_pram:
|
|
iounmap(hcd->regs);
|
|
err_regs:
|
|
usb_put_hcd(hcd);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit fhci_remove(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
|
|
int i;
|
|
int j;
|
|
|
|
usb_remove_hcd(hcd);
|
|
free_irq(fhci->timer->irq, hcd);
|
|
gtm_put_timer16(fhci->timer);
|
|
cpm_muram_free(cpm_muram_offset(fhci->pram));
|
|
for (i = 0; i < NUM_GPIOS; i++) {
|
|
if (!gpio_is_valid(fhci->gpios[i]))
|
|
continue;
|
|
gpio_free(fhci->gpios[i]);
|
|
}
|
|
for (j = 0; j < NUM_PINS; j++)
|
|
qe_pin_free(fhci->pins[j]);
|
|
fhci_dfs_destroy(fhci);
|
|
usb_put_hcd(hcd);
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit of_fhci_remove(struct platform_device *ofdev)
|
|
{
|
|
return fhci_remove(&ofdev->dev);
|
|
}
|
|
|
|
static const struct of_device_id of_fhci_match[] = {
|
|
{ .compatible = "fsl,mpc8323-qe-usb", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_fhci_match);
|
|
|
|
static struct platform_driver of_fhci_driver = {
|
|
.driver = {
|
|
.name = "fsl,usb-fhci",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_fhci_match,
|
|
},
|
|
.probe = of_fhci_probe,
|
|
.remove = __devexit_p(of_fhci_remove),
|
|
};
|
|
|
|
module_platform_driver(of_fhci_driver);
|
|
|
|
MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
|
|
MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
|
|
"Jerry Huang <Chang-Ming.Huang@freescale.com>, "
|
|
"Anton Vorontsov <avorontsov@ru.mvista.com>");
|
|
MODULE_LICENSE("GPL");
|