linux_dsm_epyc7002/arch/x86/include/asm/acpi.h
Graeme Gregory b50154d53e ACPI: Don't use acpi_lapic in ACPI core code
Now ARM64 support is being added to ACPI so architecture specific
values can not be used in core ACPI code.

Following on the patch "ACPI / processor: Check if LAPIC is present
during initialization" which uses acpi_lapic in acpi_processor.c,
on ARM64 platform, GIC is used instead of local APIC, so acpi_lapic
is not a suitable value for ARM64.

What is actually important at this point is if there is/are CPU
entry/entries (Local APIC/SAPIC, GICC) in MADT, so introduce
acpi_has_cpu_in_madt() to be arch specific and generic.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-21 13:50:58 +02:00

150 lines
3.8 KiB
C

#ifndef _ASM_X86_ACPI_H
#define _ASM_X86_ACPI_H
/*
* Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <acpi/pdc_intel.h>
#include <asm/numa.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/mpspec.h>
#include <asm/realmode.h>
#ifdef CONFIG_ACPI
extern int acpi_lapic;
extern int acpi_ioapic;
extern int acpi_noirq;
extern int acpi_strict;
extern int acpi_disabled;
extern int acpi_pci_disabled;
extern int acpi_skip_timer_override;
extern int acpi_use_timer_override;
extern int acpi_fix_pin2_polarity;
extern int acpi_disable_cmcff;
extern u8 acpi_sci_flags;
extern int acpi_sci_override_gsi;
void acpi_pic_sci_set_trigger(unsigned int, u16);
extern int (*__acpi_register_gsi)(struct device *dev, u32 gsi,
int trigger, int polarity);
static inline void disable_acpi(void)
{
acpi_disabled = 1;
acpi_pci_disabled = 1;
acpi_noirq = 1;
}
extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
static inline void acpi_disable_pci(void)
{
acpi_pci_disabled = 1;
acpi_noirq_set();
}
/* Low-level suspend routine. */
extern int (*acpi_suspend_lowlevel)(void);
/* Physical address to resume after wakeup */
#define acpi_wakeup_address ((unsigned long)(real_mode_header->wakeup_start))
/*
* Check if the CPU can handle C2 and deeper
*/
static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
{
/*
* Early models (<=5) of AMD Opterons are not supposed to go into
* C2 state.
*
* Steppings 0x0A and later are good
*/
if (boot_cpu_data.x86 == 0x0F &&
boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86_model <= 0x05 &&
boot_cpu_data.x86_mask < 0x0A)
return 1;
else if (amd_e400_c1e_detected)
return 1;
else
return max_cstate;
}
static inline bool arch_has_acpi_pdc(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
return (c->x86_vendor == X86_VENDOR_INTEL ||
c->x86_vendor == X86_VENDOR_CENTAUR);
}
static inline void arch_acpi_set_pdc_bits(u32 *buf)
{
struct cpuinfo_x86 *c = &cpu_data(0);
buf[2] |= ACPI_PDC_C_CAPABILITY_SMP;
if (cpu_has(c, X86_FEATURE_EST))
buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP;
if (cpu_has(c, X86_FEATURE_ACPI))
buf[2] |= ACPI_PDC_T_FFH;
/*
* If mwait/monitor is unsupported, C2/C3_FFH will be disabled
*/
if (!cpu_has(c, X86_FEATURE_MWAIT))
buf[2] &= ~(ACPI_PDC_C_C2C3_FFH);
}
static inline bool acpi_has_cpu_in_madt(void)
{
return !!acpi_lapic;
}
#else /* !CONFIG_ACPI */
#define acpi_lapic 0
#define acpi_ioapic 0
#define acpi_disable_cmcff 0
static inline void acpi_noirq_set(void) { }
static inline void acpi_disable_pci(void) { }
static inline void disable_acpi(void) { }
#endif /* !CONFIG_ACPI */
#define ARCH_HAS_POWER_INIT 1
#ifdef CONFIG_ACPI_NUMA
extern int acpi_numa;
extern int x86_acpi_numa_init(void);
#endif /* CONFIG_ACPI_NUMA */
#define acpi_unlazy_tlb(x) leave_mm(x)
#endif /* _ASM_X86_ACPI_H */