mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 05:40:53 +07:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
187 lines
4.2 KiB
C
187 lines
4.2 KiB
C
/*
|
|
* Common Flash Interface support:
|
|
* Generic utility functions not dependant on command set
|
|
*
|
|
* Copyright (C) 2002 Red Hat
|
|
* Copyright (C) 2003 STMicroelectronics Limited
|
|
*
|
|
* This code is covered by the GPL.
|
|
*
|
|
* $Id: cfi_util.c,v 1.10 2005/11/07 11:14:23 gleixner Exp $
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mtd/xip.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/cfi.h>
|
|
#include <linux/mtd/compatmac.h>
|
|
|
|
struct cfi_extquery *
|
|
__xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
|
|
{
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
__u32 base = 0; // cfi->chips[0].start;
|
|
int ofs_factor = cfi->interleave * cfi->device_type;
|
|
int i;
|
|
struct cfi_extquery *extp = NULL;
|
|
|
|
printk(" %s Extended Query Table at 0x%4.4X\n", name, adr);
|
|
if (!adr)
|
|
goto out;
|
|
|
|
extp = kmalloc(size, GFP_KERNEL);
|
|
if (!extp) {
|
|
printk(KERN_ERR "Failed to allocate memory\n");
|
|
goto out;
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_XIP
|
|
local_irq_disable();
|
|
#endif
|
|
|
|
/* Switch it into Query Mode */
|
|
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
|
|
|
|
/* Read in the Extended Query Table */
|
|
for (i=0; i<size; i++) {
|
|
((unsigned char *)extp)[i] =
|
|
cfi_read_query(map, base+((adr+i)*ofs_factor));
|
|
}
|
|
|
|
/* Make sure it returns to read mode */
|
|
cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
|
|
cfi_send_gen_cmd(0xff, 0, base, map, cfi, cfi->device_type, NULL);
|
|
|
|
#ifdef CONFIG_MTD_XIP
|
|
(void) map_read(map, base);
|
|
asm volatile (".rep 8; nop; .endr");
|
|
local_irq_enable();
|
|
#endif
|
|
|
|
out: return extp;
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfi_read_pri);
|
|
|
|
void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
|
|
{
|
|
struct map_info *map = mtd->priv;
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
struct cfi_fixup *f;
|
|
|
|
for (f=fixups; f->fixup; f++) {
|
|
if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
|
|
((f->id == CFI_ID_ANY) || (f->id == cfi->id))) {
|
|
f->fixup(mtd, f->param);
|
|
}
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfi_fixup);
|
|
|
|
int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
|
|
loff_t ofs, size_t len, void *thunk)
|
|
{
|
|
struct map_info *map = mtd->priv;
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
unsigned long adr;
|
|
int chipnum, ret = 0;
|
|
int i, first;
|
|
struct mtd_erase_region_info *regions = mtd->eraseregions;
|
|
|
|
if (ofs > mtd->size)
|
|
return -EINVAL;
|
|
|
|
if ((len + ofs) > mtd->size)
|
|
return -EINVAL;
|
|
|
|
/* Check that both start and end of the requested erase are
|
|
* aligned with the erasesize at the appropriate addresses.
|
|
*/
|
|
|
|
i = 0;
|
|
|
|
/* Skip all erase regions which are ended before the start of
|
|
the requested erase. Actually, to save on the calculations,
|
|
we skip to the first erase region which starts after the
|
|
start of the requested erase, and then go back one.
|
|
*/
|
|
|
|
while (i < mtd->numeraseregions && ofs >= regions[i].offset)
|
|
i++;
|
|
i--;
|
|
|
|
/* OK, now i is pointing at the erase region in which this
|
|
erase request starts. Check the start of the requested
|
|
erase range is aligned with the erase size which is in
|
|
effect here.
|
|
*/
|
|
|
|
if (ofs & (regions[i].erasesize-1))
|
|
return -EINVAL;
|
|
|
|
/* Remember the erase region we start on */
|
|
first = i;
|
|
|
|
/* Next, check that the end of the requested erase is aligned
|
|
* with the erase region at that address.
|
|
*/
|
|
|
|
while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset)
|
|
i++;
|
|
|
|
/* As before, drop back one to point at the region in which
|
|
the address actually falls
|
|
*/
|
|
i--;
|
|
|
|
if ((ofs + len) & (regions[i].erasesize-1))
|
|
return -EINVAL;
|
|
|
|
chipnum = ofs >> cfi->chipshift;
|
|
adr = ofs - (chipnum << cfi->chipshift);
|
|
|
|
i=first;
|
|
|
|
while(len) {
|
|
int size = regions[i].erasesize;
|
|
|
|
ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
adr += size;
|
|
ofs += size;
|
|
len -= size;
|
|
|
|
if (ofs == regions[i].offset + size * regions[i].numblocks)
|
|
i++;
|
|
|
|
if (adr >> cfi->chipshift) {
|
|
adr = 0;
|
|
chipnum++;
|
|
|
|
if (chipnum >= cfi->numchips)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(cfi_varsize_frob);
|
|
|
|
MODULE_LICENSE("GPL");
|