linux_dsm_epyc7002/drivers/gpio/gpiolib-acpi.c
Linus Torvalds 510965dd4a This is the bulk of GPIO changes for the v4.1 development
cycle:
 
 - A new GPIO hogging mechanism has been added. This can
   be used on boards that want to drive some GPIO line high,
   low, or set it as input on boot and then never touch it
   again. For some embedded systems this is bliss and
   simplifies things to a great extent.
 
 - Some API cleanup and closure: gpiod_get_array() and
   gpiod_put_array() has been added to get and put GPIOs
   in bulk as was possible with the non-descriptor API.
 
 - Encapsulate cross-calls to the pin control subsystem in
   <linux/gpio/driver.h>. Now this should be the only header
   any GPIO driver needs to include or something is wrong.
   Cleanups restricting drivers to this include are welcomed
   if tested.
 
 - Sort the GPIO Kconfig and split it into submenus, as
   it was becoming and unstructured, illogical and
   unnavigatable mess. I hope this is easier to follow.
   Menus that require a certain subsystem like I2C can
   now be hidden nicely for example, still working on
   others.
 
 - New drivers:
 
     - New driver for the Altera Soft GPIO.
 
     - The F7188x driver now handles the F71869 and
       F71869A variants.
 
     - The MIPS Loongson driver has been moved to
       drivers/gpio for consolidation and cleanup.
 
 - Cleanups:
 
    - The MAX732x is converted to use the GPIOLIB_IRQCHIP
      infrastructure.
 
    - The PCF857x is converted to use the GPIOLIB_IRQCHIP
      infrastructure.
 
    - Radical cleanup of the OMAP driver.
 
 - Misc:
 
    - Enable the DWAPB GPIO for all architectures. This is
      a "hard IP" block from Synopsys which has started to
      turn up in so diverse architectures as X86 Quark, ARC
      and a slew of ARM systems. So even though it's not an
      expander, it's generic enough to be available for all.
 
    - We add a mock GPIO on Crystalcove PMIC after a long
      discussion with Daniel Vetter et al, tracing back to
      the shootout at the kernel summit where DRM drivers
      and sub-componentization was discussed. In this case
      a mock GPIO is assumed to be the best compromise
      gaining some reuse of infrastructure without making
      DRM drivers overly complex at the same time. Let's
      see.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVMNYHAAoJEEEQszewGV1zSmwP/2oCk4CB4fexrqM+irUJrDnT
 3D/8tuaq7EghMnwPXCfHa8R8eWF6XEDvHPcJNVgXiWbtCGRMpdsiobFunzwLQv5A
 CbcuAOzWmzA0ePbfa0+xpLpWM/RJP9u1an/RboIzeeS7oQ1Yj/VjF8uS8Se+Pe3r
 nPKvTpoU5lGpIUTEEYjiJhL8pBmp8k75a6NGM4U8VwXI9BsdhDkpRGsfG3NK8hs2
 vSvWDB19NCW6iOd3gN4KA4f0Zz57WONMS7jY2WaipqYRlr37o4i2CA0ME1xoXEfg
 3JT1lmg7esNCvnjQOaGTaM6nf66j7/nleNtnMmAAJcJeMNoh9yS6397TGaYFThsn
 C1WmAoaonor3RAujrL3oRenxfq2+Vl63OvsClDiWz7LL9YYJ/G2nS3MggFHpZUhu
 /CHXSt08j0Kewfc5SkvFCTnrPG7aWy/YDou6PfuXIvkFp5h1FXDkHTXvOD33turD
 ohEPlg/9i2uCnVQfN+GV4h69WSyEiOpxG5W7ryE+nIo6XzWIctHLIH2V6aE7YrwG
 FBg7hC1QV1cI776HFOuM4rPwG1N80IQeC3vr5z/jEtZVPXrIaGvupxFC+O1DAx4W
 rzBD8lX45B96WmIW2odg11KXXyPO1srW4ZFWghm95HTfvnQc3O6LmV9riv1k7DYA
 gR+aRYNiLO01UmoTPYbK
 =QFbC
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.1 development cycle:

   - A new GPIO hogging mechanism has been added.  This can be used on
     boards that want to drive some GPIO line high, low, or set it as
     input on boot and then never touch it again.  For some embedded
     systems this is bliss and simplifies things to a great extent.

   - Some API cleanup and closure: gpiod_get_array() and
     gpiod_put_array() has been added to get and put GPIOs in bulk as
     was possible with the non-descriptor API.

   - Encapsulate cross-calls to the pin control subsystem in
     <linux/gpio/driver.h>.  Now this should be the only header any GPIO
     driver needs to include or something is wrong.  Cleanups
     restricting drivers to this include are welcomed if tested.

   - Sort the GPIO Kconfig and split it into submenus, as it was
     becoming and unstructured, illogical and unnavigatable mess.  I
     hope this is easier to follow.  Menus that require a certain
     subsystem like I2C can now be hidden nicely for example, still
     working on others.

   - New drivers:

       - New driver for the Altera Soft GPIO.

       - The F7188x driver now handles the F71869 and F71869A variants.

       - The MIPS Loongson driver has been moved to drivers/gpio for
         consolidation and cleanup.

   - Cleanups:

       - The MAX732x is converted to use the GPIOLIB_IRQCHIP
         infrastructure.

       - The PCF857x is converted to use the GPIOLIB_IRQCHIP
         infrastructure.

       - Radical cleanup of the OMAP driver.

   - Misc:

       - Enable the DWAPB GPIO for all architectures.  This is a "hard
         IP" block from Synopsys which has started to turn up in so
         diverse architectures as X86 Quark, ARC and a slew of ARM
         systems.  So even though it's not an expander, it's generic
         enough to be available for all.

       - We add a mock GPIO on Crystalcove PMIC after a long discussion
         with Daniel Vetter et al, tracing back to the shootout at the
         kernel summit where DRM drivers and sub-componentization was
         discussed.  In this case a mock GPIO is assumed to be the best
         compromise gaining some reuse of infrastructure without making
         DRM drivers overly complex at the same time.  Let's see"

* tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits)
  Revert "gpio: sch: use uapi/linux/pci_ids.h directly"
  gpio: dwapb: remove dependencies
  gpio: dwapb: enable for ARC
  gpio: removing kfree remove functionality
  gpio: mvebu: Fix mask/unmask managment per irq chip type
  gpio: split GPIO drivers in submenus
  gpio: move MFD GPIO drivers under their own comment
  gpio: move BCM Kona Kconfig option
  gpio: arrange SPI Kconfig symbols alphabetically
  gpio: arrange PCI GPIO controllers alphabetically
  gpio: arrange I2C Kconfig symbols alphabetically
  gpio: arrange Kconfig symbols alphabetically
  gpio: ich: Implement get_direction function
  gpio: use (!foo) instead of (foo == NULL)
  gpio: arizona: drop owner assignment from platform_drivers
  gpio: max7300: remove 'ret' variable
  gpio: use devm_kzalloc
  gpio: sch: use uapi/linux/pci_ids.h directly
  gpio: x-gene: fix devm_ioremap_resource() check
  gpio: loongson: Add Loongson-3A/3B GPIO driver support
  ...
2015-04-18 08:22:10 -04:00

809 lines
20 KiB
C

/*
* ACPI helpers for GPIO API
*
* Copyright (C) 2012, Intel Corporation
* Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
* Mika Westerberg <mika.westerberg@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/pinctrl/pinctrl.h>
#include "gpiolib.h"
struct acpi_gpio_event {
struct list_head node;
acpi_handle handle;
unsigned int pin;
unsigned int irq;
struct gpio_desc *desc;
};
struct acpi_gpio_connection {
struct list_head node;
unsigned int pin;
struct gpio_desc *desc;
};
struct acpi_gpio_chip {
/*
* ACPICA requires that the first field of the context parameter
* passed to acpi_install_address_space_handler() is large enough
* to hold struct acpi_connection_info.
*/
struct acpi_connection_info conn_info;
struct list_head conns;
struct mutex conn_lock;
struct gpio_chip *chip;
struct list_head events;
};
static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
{
if (!gc->dev)
return false;
return ACPI_HANDLE(gc->dev) == data;
}
#ifdef CONFIG_PINCTRL
/**
* acpi_gpiochip_pin_to_gpio_offset() - translates ACPI GPIO to Linux GPIO
* @chip: GPIO chip
* @pin: ACPI GPIO pin number from GpioIo/GpioInt resource
*
* Function takes ACPI GpioIo/GpioInt pin number as a parameter and
* translates it to a corresponding offset suitable to be passed to a
* GPIO controller driver.
*
* Typically the returned offset is same as @pin, but if the GPIO
* controller uses pin controller and the mapping is not contigous the
* offset might be different.
*/
static int acpi_gpiochip_pin_to_gpio_offset(struct gpio_chip *chip, int pin)
{
struct gpio_pin_range *pin_range;
/* If there are no ranges in this chip, use 1:1 mapping */
if (list_empty(&chip->pin_ranges))
return pin;
list_for_each_entry(pin_range, &chip->pin_ranges, node) {
const struct pinctrl_gpio_range *range = &pin_range->range;
int i;
if (range->pins) {
for (i = 0; i < range->npins; i++) {
if (range->pins[i] == pin)
return range->base + i - chip->base;
}
} else {
if (pin >= range->pin_base &&
pin < range->pin_base + range->npins) {
unsigned gpio_base;
gpio_base = range->base - chip->base;
return gpio_base + pin - range->pin_base;
}
}
}
return -EINVAL;
}
#else
static inline int acpi_gpiochip_pin_to_gpio_offset(struct gpio_chip *chip,
int pin)
{
return pin;
}
#endif
/**
* acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
* @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
* @pin: ACPI GPIO pin number (0-based, controller-relative)
*
* Returns GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
* error value
*/
static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
{
struct gpio_chip *chip;
acpi_handle handle;
acpi_status status;
int offset;
status = acpi_get_handle(NULL, path, &handle);
if (ACPI_FAILURE(status))
return ERR_PTR(-ENODEV);
chip = gpiochip_find(handle, acpi_gpiochip_find);
if (!chip)
return ERR_PTR(-ENODEV);
offset = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
if (offset < 0)
return ERR_PTR(offset);
return gpiochip_get_desc(chip, offset);
}
static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
{
struct acpi_gpio_event *event = data;
acpi_evaluate_object(event->handle, NULL, NULL, NULL);
return IRQ_HANDLED;
}
static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
{
struct acpi_gpio_event *event = data;
acpi_execute_simple_method(event->handle, NULL, event->pin);
return IRQ_HANDLED;
}
static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
{
/* The address of this function is used as a key. */
}
static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
void *context)
{
struct acpi_gpio_chip *acpi_gpio = context;
struct gpio_chip *chip = acpi_gpio->chip;
struct acpi_resource_gpio *agpio;
acpi_handle handle, evt_handle;
struct acpi_gpio_event *event;
irq_handler_t handler = NULL;
struct gpio_desc *desc;
unsigned long irqflags;
int ret, pin, irq;
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
return AE_OK;
agpio = &ares->data.gpio;
if (agpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
return AE_OK;
handle = ACPI_HANDLE(chip->dev);
pin = agpio->pin_table[0];
if (pin <= 255) {
char ev_name[5];
sprintf(ev_name, "_%c%02X",
agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L',
pin);
if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
handler = acpi_gpio_irq_handler;
}
if (!handler) {
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle)))
handler = acpi_gpio_irq_handler_evt;
}
if (!handler)
return AE_BAD_PARAMETER;
pin = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
if (pin < 0)
return AE_BAD_PARAMETER;
desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event");
if (IS_ERR(desc)) {
dev_err(chip->dev, "Failed to request GPIO\n");
return AE_ERROR;
}
gpiod_direction_input(desc);
ret = gpiochip_lock_as_irq(chip, pin);
if (ret) {
dev_err(chip->dev, "Failed to lock GPIO as interrupt\n");
goto fail_free_desc;
}
irq = gpiod_to_irq(desc);
if (irq < 0) {
dev_err(chip->dev, "Failed to translate GPIO to IRQ\n");
goto fail_unlock_irq;
}
irqflags = IRQF_ONESHOT;
if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
if (agpio->polarity == ACPI_ACTIVE_HIGH)
irqflags |= IRQF_TRIGGER_HIGH;
else
irqflags |= IRQF_TRIGGER_LOW;
} else {
switch (agpio->polarity) {
case ACPI_ACTIVE_HIGH:
irqflags |= IRQF_TRIGGER_RISING;
break;
case ACPI_ACTIVE_LOW:
irqflags |= IRQF_TRIGGER_FALLING;
break;
default:
irqflags |= IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING;
break;
}
}
event = kzalloc(sizeof(*event), GFP_KERNEL);
if (!event)
goto fail_unlock_irq;
event->handle = evt_handle;
event->irq = irq;
event->pin = pin;
event->desc = desc;
ret = request_threaded_irq(event->irq, NULL, handler, irqflags,
"ACPI:Event", event);
if (ret) {
dev_err(chip->dev, "Failed to setup interrupt handler for %d\n",
event->irq);
goto fail_free_event;
}
list_add_tail(&event->node, &acpi_gpio->events);
return AE_OK;
fail_free_event:
kfree(event);
fail_unlock_irq:
gpiochip_unlock_as_irq(chip, pin);
fail_free_desc:
gpiochip_free_own_desc(desc);
return AE_ERROR;
}
/**
* acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
* @chip: GPIO chip
*
* ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
* handled by ACPI event methods which need to be called from the GPIO
* chip's interrupt handler. acpi_gpiochip_request_interrupts finds out which
* gpio pins have acpi event methods and assigns interrupt handlers that calls
* the acpi event methods for those pins.
*/
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
acpi_handle handle;
acpi_status status;
if (!chip->dev || !chip->to_irq)
return;
handle = ACPI_HANDLE(chip->dev);
if (!handle)
return;
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
if (ACPI_FAILURE(status))
return;
INIT_LIST_HEAD(&acpi_gpio->events);
acpi_walk_resources(handle, "_AEI",
acpi_gpiochip_request_interrupt, acpi_gpio);
}
/**
* acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
* @chip: GPIO chip
*
* Free interrupts associated with GPIO ACPI event method for the given
* GPIO chip.
*/
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
struct acpi_gpio_event *event, *ep;
acpi_handle handle;
acpi_status status;
if (!chip->dev || !chip->to_irq)
return;
handle = ACPI_HANDLE(chip->dev);
if (!handle)
return;
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
if (ACPI_FAILURE(status))
return;
list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
struct gpio_desc *desc;
free_irq(event->irq, event);
desc = event->desc;
if (WARN_ON(IS_ERR(desc)))
continue;
gpiochip_unlock_as_irq(chip, event->pin);
gpiochip_free_own_desc(desc);
list_del(&event->node);
kfree(event);
}
}
int acpi_dev_add_driver_gpios(struct acpi_device *adev,
const struct acpi_gpio_mapping *gpios)
{
if (adev && gpios) {
adev->driver_gpios = gpios;
return 0;
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
const char *name, int index,
struct acpi_reference_args *args)
{
const struct acpi_gpio_mapping *gm;
if (!adev->driver_gpios)
return false;
for (gm = adev->driver_gpios; gm->name; gm++)
if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
const struct acpi_gpio_params *par = gm->data + index;
args->adev = adev;
args->args[0] = par->crs_entry_index;
args->args[1] = par->line_index;
args->args[2] = par->active_low;
args->nargs = 3;
return true;
}
return false;
}
struct acpi_gpio_lookup {
struct acpi_gpio_info info;
int index;
int pin_index;
struct gpio_desc *desc;
int n;
};
static int acpi_find_gpio(struct acpi_resource *ares, void *data)
{
struct acpi_gpio_lookup *lookup = data;
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
return 1;
if (lookup->n++ == lookup->index && !lookup->desc) {
const struct acpi_resource_gpio *agpio = &ares->data.gpio;
int pin_index = lookup->pin_index;
if (pin_index >= agpio->pin_table_length)
return 1;
lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
agpio->pin_table[pin_index]);
lookup->info.gpioint =
agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
/*
* ActiveLow is only specified for GpioInt resource. If
* GpioIo is used then the only way to set the flag is
* to use _DSD "gpios" property.
*/
if (lookup->info.gpioint)
lookup->info.active_low =
agpio->polarity == ACPI_ACTIVE_LOW;
}
return 1;
}
/**
* acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
* @adev: pointer to a ACPI device to get GPIO from
* @propname: Property name of the GPIO (optional)
* @index: index of GpioIo/GpioInt resource (starting from %0)
* @info: info pointer to fill in (optional)
*
* Function goes through ACPI resources for @adev and based on @index looks
* up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
* and returns it. @index matches GpioIo/GpioInt resources only so if there
* are total %3 GPIO resources, the index goes from %0 to %2.
*
* If @propname is specified the GPIO is looked using device property. In
* that case @index is used to select the GPIO entry in the property value
* (in case of multiple).
*
* If the GPIO cannot be translated or there is an error an ERR_PTR is
* returned.
*
* Note: if the GPIO resource has multiple entries in the pin list, this
* function only returns the first.
*/
struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
const char *propname, int index,
struct acpi_gpio_info *info)
{
struct acpi_gpio_lookup lookup;
struct list_head resource_list;
bool active_low = false;
int ret;
if (!adev)
return ERR_PTR(-ENODEV);
memset(&lookup, 0, sizeof(lookup));
lookup.index = index;
if (propname) {
struct acpi_reference_args args;
dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
memset(&args, 0, sizeof(args));
ret = acpi_dev_get_property_reference(adev, propname,
index, &args);
if (ret) {
bool found = acpi_get_driver_gpio_data(adev, propname,
index, &args);
if (!found)
return ERR_PTR(ret);
}
/*
* The property was found and resolved so need to
* lookup the GPIO based on returned args instead.
*/
adev = args.adev;
if (args.nargs >= 2) {
lookup.index = args.args[0];
lookup.pin_index = args.args[1];
/*
* 3rd argument, if present is used to
* specify active_low.
*/
if (args.nargs >= 3)
active_low = !!args.args[2];
}
dev_dbg(&adev->dev, "GPIO: _DSD returned %s %zd %llu %llu %llu\n",
dev_name(&adev->dev), args.nargs,
args.args[0], args.args[1], args.args[2]);
} else {
dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
}
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, acpi_find_gpio,
&lookup);
if (ret < 0)
return ERR_PTR(ret);
acpi_dev_free_resource_list(&resource_list);
if (lookup.desc && info) {
*info = lookup.info;
if (active_low)
info->active_low = active_low;
}
return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
}
static acpi_status
acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
u32 bits, u64 *value, void *handler_context,
void *region_context)
{
struct acpi_gpio_chip *achip = region_context;
struct gpio_chip *chip = achip->chip;
struct acpi_resource_gpio *agpio;
struct acpi_resource *ares;
int pin_index = (int)address;
acpi_status status;
bool pull_up;
int length;
int i;
status = acpi_buffer_to_resource(achip->conn_info.connection,
achip->conn_info.length, &ares);
if (ACPI_FAILURE(status))
return status;
if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) {
ACPI_FREE(ares);
return AE_BAD_PARAMETER;
}
agpio = &ares->data.gpio;
pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP;
if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
function == ACPI_WRITE)) {
ACPI_FREE(ares);
return AE_BAD_PARAMETER;
}
length = min(agpio->pin_table_length, (u16)(pin_index + bits));
for (i = pin_index; i < length; ++i) {
unsigned pin = agpio->pin_table[i];
struct acpi_gpio_connection *conn;
struct gpio_desc *desc;
bool found;
pin = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
if (pin < 0) {
status = AE_BAD_PARAMETER;
goto out;
}
mutex_lock(&achip->conn_lock);
found = false;
list_for_each_entry(conn, &achip->conns, node) {
if (conn->pin == pin) {
found = true;
desc = conn->desc;
break;
}
}
if (!found) {
desc = gpiochip_request_own_desc(chip, pin,
"ACPI:OpRegion");
if (IS_ERR(desc)) {
status = AE_ERROR;
mutex_unlock(&achip->conn_lock);
goto out;
}
switch (agpio->io_restriction) {
case ACPI_IO_RESTRICT_INPUT:
gpiod_direction_input(desc);
break;
case ACPI_IO_RESTRICT_OUTPUT:
/*
* ACPI GPIO resources don't contain an
* initial value for the GPIO. Therefore we
* deduce that value from the pull field
* instead. If the pin is pulled up we
* assume default to be high, otherwise
* low.
*/
gpiod_direction_output(desc, pull_up);
break;
default:
/*
* Assume that the BIOS has configured the
* direction and pull accordingly.
*/
break;
}
conn = kzalloc(sizeof(*conn), GFP_KERNEL);
if (!conn) {
status = AE_NO_MEMORY;
gpiochip_free_own_desc(desc);
mutex_unlock(&achip->conn_lock);
goto out;
}
conn->pin = pin;
conn->desc = desc;
list_add_tail(&conn->node, &achip->conns);
}
mutex_unlock(&achip->conn_lock);
if (function == ACPI_WRITE)
gpiod_set_raw_value_cansleep(desc,
!!((1 << i) & *value));
else
*value |= (u64)gpiod_get_raw_value_cansleep(desc) << i;
}
out:
ACPI_FREE(ares);
return status;
}
static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip)
{
struct gpio_chip *chip = achip->chip;
acpi_handle handle = ACPI_HANDLE(chip->dev);
acpi_status status;
INIT_LIST_HEAD(&achip->conns);
mutex_init(&achip->conn_lock);
status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
acpi_gpio_adr_space_handler,
NULL, achip);
if (ACPI_FAILURE(status))
dev_err(chip->dev, "Failed to install GPIO OpRegion handler\n");
}
static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
{
struct gpio_chip *chip = achip->chip;
acpi_handle handle = ACPI_HANDLE(chip->dev);
struct acpi_gpio_connection *conn, *tmp;
acpi_status status;
status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
acpi_gpio_adr_space_handler);
if (ACPI_FAILURE(status)) {
dev_err(chip->dev, "Failed to remove GPIO OpRegion handler\n");
return;
}
list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) {
gpiochip_free_own_desc(conn->desc);
list_del(&conn->node);
kfree(conn);
}
}
void acpi_gpiochip_add(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
acpi_handle handle;
acpi_status status;
if (!chip || !chip->dev)
return;
handle = ACPI_HANDLE(chip->dev);
if (!handle)
return;
acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL);
if (!acpi_gpio) {
dev_err(chip->dev,
"Failed to allocate memory for ACPI GPIO chip\n");
return;
}
acpi_gpio->chip = chip;
status = acpi_attach_data(handle, acpi_gpio_chip_dh, acpi_gpio);
if (ACPI_FAILURE(status)) {
dev_err(chip->dev, "Failed to attach ACPI GPIO chip\n");
kfree(acpi_gpio);
return;
}
acpi_gpiochip_request_regions(acpi_gpio);
}
void acpi_gpiochip_remove(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
acpi_handle handle;
acpi_status status;
if (!chip || !chip->dev)
return;
handle = ACPI_HANDLE(chip->dev);
if (!handle)
return;
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
if (ACPI_FAILURE(status)) {
dev_warn(chip->dev, "Failed to retrieve ACPI GPIO chip\n");
return;
}
acpi_gpiochip_free_regions(acpi_gpio);
acpi_detach_data(handle, acpi_gpio_chip_dh);
kfree(acpi_gpio);
}
static unsigned int acpi_gpio_package_count(const union acpi_object *obj)
{
const union acpi_object *element = obj->package.elements;
const union acpi_object *end = element + obj->package.count;
unsigned int count = 0;
while (element < end) {
if (element->type == ACPI_TYPE_LOCAL_REFERENCE)
count++;
element++;
}
return count;
}
static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
{
unsigned int *count = data;
if (ares->type == ACPI_RESOURCE_TYPE_GPIO)
*count += ares->data.gpio.pin_table_length;
return 1;
}
/**
* acpi_gpio_count - return the number of GPIOs associated with a
* device / function or -ENOENT if no GPIO has been
* assigned to the requested function.
* @dev: GPIO consumer, can be NULL for system-global GPIOs
* @con_id: function within the GPIO consumer
*/
int acpi_gpio_count(struct device *dev, const char *con_id)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
const union acpi_object *obj;
const struct acpi_gpio_mapping *gm;
int count = -ENOENT;
int ret;
char propname[32];
unsigned int i;
/* Try first from _DSD */
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
if (con_id && strcmp(con_id, "gpios"))
snprintf(propname, sizeof(propname), "%s-%s",
con_id, gpio_suffixes[i]);
else
snprintf(propname, sizeof(propname), "%s",
gpio_suffixes[i]);
ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
&obj);
if (ret == 0) {
if (obj->type == ACPI_TYPE_LOCAL_REFERENCE)
count = 1;
else if (obj->type == ACPI_TYPE_PACKAGE)
count = acpi_gpio_package_count(obj);
} else if (adev->driver_gpios) {
for (gm = adev->driver_gpios; gm->name; gm++)
if (strcmp(propname, gm->name) == 0) {
count = gm->size;
break;
}
}
if (count >= 0)
break;
}
/* Then from plain _CRS GPIOs */
if (count < 0) {
struct list_head resource_list;
unsigned int crs_count = 0;
INIT_LIST_HEAD(&resource_list);
acpi_dev_get_resources(adev, &resource_list,
acpi_find_gpio_count, &crs_count);
acpi_dev_free_resource_list(&resource_list);
if (crs_count > 0)
count = crs_count;
}
return count;
}