linux_dsm_epyc7002/drivers/gpu/drm/omapdrm/omap_drv.c
Laurent Pinchart dadf4659d0 drm: omapdrm: Let the DRM core skip plane commit on inactive CRTCs
The DRM core supports skipping plane update for inactive CRTCs for
hardware that don't need it or can't cope with it. That's our case, and
the driver already skips flushing planes on inactice CRTCs.

We can't remove the check from the driver, as active CRTCs are disabled
at the hardware level when an atomic flush is performed if a mode set is
pending. There's however no need to forward the plane commit calls to
the driver, so use the DRM core infrastructure to skip them with a
detailed comment to explain why the check must still be kept in the
driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-19 11:24:58 +02:00

973 lines
22 KiB
C

/*
* drivers/gpu/drm/omapdrm/omap_drv.c
*
* Copyright (C) 2011 Texas Instruments
* Author: Rob Clark <rob@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/wait.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include "omap_dmm_tiler.h"
#include "omap_drv.h"
#define DRIVER_NAME MODULE_NAME
#define DRIVER_DESC "OMAP DRM"
#define DRIVER_DATE "20110917"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 0
#define DRIVER_PATCHLEVEL 0
static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS;
MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs");
module_param(num_crtc, int, 0600);
/*
* mode config funcs
*/
/* Notes about mapping DSS and DRM entities:
* CRTC: overlay
* encoder: manager.. with some extension to allow one primary CRTC
* and zero or more video CRTC's to be mapped to one encoder?
* connector: dssdev.. manager can be attached/detached from different
* devices
*/
static void omap_fb_output_poll_changed(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
DBG("dev=%p", dev);
if (priv->fbdev)
drm_fb_helper_hotplug_event(priv->fbdev);
}
struct omap_atomic_state_commit {
struct work_struct work;
struct drm_device *dev;
struct drm_atomic_state *state;
u32 crtcs;
};
static void omap_atomic_wait_for_completion(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc_state *old_crtc_state;
struct drm_crtc *crtc;
unsigned int i;
int ret;
for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
if (!crtc->state->enable)
continue;
ret = omap_crtc_wait_pending(crtc);
if (!ret)
dev_warn(dev->dev,
"atomic complete timeout (pipe %u)!\n", i);
}
}
static void omap_atomic_complete(struct omap_atomic_state_commit *commit)
{
struct drm_device *dev = commit->dev;
struct omap_drm_private *priv = dev->dev_private;
struct drm_atomic_state *old_state = commit->state;
/* Apply the atomic update. */
dispc_runtime_get();
drm_atomic_helper_commit_modeset_disables(dev, old_state);
drm_atomic_helper_commit_planes(dev, old_state,
DRM_PLANE_COMMIT_ACTIVE_ONLY);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
omap_atomic_wait_for_completion(dev, old_state);
drm_atomic_helper_cleanup_planes(dev, old_state);
dispc_runtime_put();
drm_atomic_state_put(old_state);
/* Complete the commit, wake up any waiter. */
spin_lock(&priv->commit.lock);
priv->commit.pending &= ~commit->crtcs;
spin_unlock(&priv->commit.lock);
wake_up_all(&priv->commit.wait);
kfree(commit);
}
static void omap_atomic_work(struct work_struct *work)
{
struct omap_atomic_state_commit *commit =
container_of(work, struct omap_atomic_state_commit, work);
omap_atomic_complete(commit);
}
static bool omap_atomic_is_pending(struct omap_drm_private *priv,
struct omap_atomic_state_commit *commit)
{
bool pending;
spin_lock(&priv->commit.lock);
pending = priv->commit.pending & commit->crtcs;
spin_unlock(&priv->commit.lock);
return pending;
}
static int omap_atomic_commit(struct drm_device *dev,
struct drm_atomic_state *state, bool nonblock)
{
struct omap_drm_private *priv = dev->dev_private;
struct omap_atomic_state_commit *commit;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i, ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
/* Allocate the commit object. */
commit = kzalloc(sizeof(*commit), GFP_KERNEL);
if (commit == NULL) {
ret = -ENOMEM;
goto error;
}
INIT_WORK(&commit->work, omap_atomic_work);
commit->dev = dev;
commit->state = state;
/* Wait until all affected CRTCs have completed previous commits and
* mark them as pending.
*/
for_each_crtc_in_state(state, crtc, crtc_state, i)
commit->crtcs |= drm_crtc_mask(crtc);
wait_event(priv->commit.wait, !omap_atomic_is_pending(priv, commit));
spin_lock(&priv->commit.lock);
priv->commit.pending |= commit->crtcs;
spin_unlock(&priv->commit.lock);
/* Swap the state, this is the point of no return. */
drm_atomic_helper_swap_state(state, true);
drm_atomic_state_get(state);
if (nonblock)
schedule_work(&commit->work);
else
omap_atomic_complete(commit);
return 0;
error:
drm_atomic_helper_cleanup_planes(dev, state);
return ret;
}
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
.fb_create = omap_framebuffer_create,
.output_poll_changed = omap_fb_output_poll_changed,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = omap_atomic_commit,
};
static int get_connector_type(struct omap_dss_device *dssdev)
{
switch (dssdev->type) {
case OMAP_DISPLAY_TYPE_HDMI:
return DRM_MODE_CONNECTOR_HDMIA;
case OMAP_DISPLAY_TYPE_DVI:
return DRM_MODE_CONNECTOR_DVID;
case OMAP_DISPLAY_TYPE_DSI:
return DRM_MODE_CONNECTOR_DSI;
default:
return DRM_MODE_CONNECTOR_Unknown;
}
}
static bool channel_used(struct drm_device *dev, enum omap_channel channel)
{
struct omap_drm_private *priv = dev->dev_private;
int i;
for (i = 0; i < priv->num_crtcs; i++) {
struct drm_crtc *crtc = priv->crtcs[i];
if (omap_crtc_channel(crtc) == channel)
return true;
}
return false;
}
static void omap_disconnect_dssdevs(void)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev)
dssdev->driver->disconnect(dssdev);
}
static int omap_connect_dssdevs(void)
{
int r;
struct omap_dss_device *dssdev = NULL;
bool no_displays = true;
for_each_dss_dev(dssdev) {
r = dssdev->driver->connect(dssdev);
if (r == -EPROBE_DEFER) {
omap_dss_put_device(dssdev);
goto cleanup;
} else if (r) {
dev_warn(dssdev->dev, "could not connect display: %s\n",
dssdev->name);
} else {
no_displays = false;
}
}
if (no_displays)
return -EPROBE_DEFER;
return 0;
cleanup:
/*
* if we are deferring probe, we disconnect the devices we previously
* connected
*/
omap_disconnect_dssdevs();
return r;
}
static int omap_modeset_create_crtc(struct drm_device *dev, int id,
enum omap_channel channel,
u32 possible_crtcs)
{
struct omap_drm_private *priv = dev->dev_private;
struct drm_plane *plane;
struct drm_crtc *crtc;
plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_PRIMARY,
possible_crtcs);
if (IS_ERR(plane))
return PTR_ERR(plane);
crtc = omap_crtc_init(dev, plane, channel, id);
BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
priv->crtcs[id] = crtc;
priv->num_crtcs++;
priv->planes[id] = plane;
priv->num_planes++;
return 0;
}
static int omap_modeset_init_properties(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0, 3);
if (!priv->zorder_prop)
return -ENOMEM;
return 0;
}
static int omap_modeset_init(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
struct omap_dss_device *dssdev = NULL;
int num_ovls = dss_feat_get_num_ovls();
int num_mgrs = dss_feat_get_num_mgrs();
int num_crtcs;
int i, id = 0;
int ret;
u32 possible_crtcs;
drm_mode_config_init(dev);
ret = omap_modeset_init_properties(dev);
if (ret < 0)
return ret;
/*
* We usually don't want to create a CRTC for each manager, at least
* not until we have a way to expose private planes to userspace.
* Otherwise there would not be enough video pipes left for drm planes.
* We use the num_crtc argument to limit the number of crtcs we create.
*/
num_crtcs = min3(num_crtc, num_mgrs, num_ovls);
possible_crtcs = (1 << num_crtcs) - 1;
dssdev = NULL;
for_each_dss_dev(dssdev) {
struct drm_connector *connector;
struct drm_encoder *encoder;
enum omap_channel channel;
struct omap_dss_device *out;
if (!omapdss_device_is_connected(dssdev))
continue;
encoder = omap_encoder_init(dev, dssdev);
if (!encoder) {
dev_err(dev->dev, "could not create encoder: %s\n",
dssdev->name);
return -ENOMEM;
}
connector = omap_connector_init(dev,
get_connector_type(dssdev), dssdev, encoder);
if (!connector) {
dev_err(dev->dev, "could not create connector: %s\n",
dssdev->name);
return -ENOMEM;
}
BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
priv->encoders[priv->num_encoders++] = encoder;
priv->connectors[priv->num_connectors++] = connector;
drm_mode_connector_attach_encoder(connector, encoder);
/*
* if we have reached the limit of the crtcs we are allowed to
* create, let's not try to look for a crtc for this
* panel/encoder and onwards, we will, of course, populate the
* the possible_crtcs field for all the encoders with the final
* set of crtcs we create
*/
if (id == num_crtcs)
continue;
/*
* get the recommended DISPC channel for this encoder. For now,
* we only try to get create a crtc out of the recommended, the
* other possible channels to which the encoder can connect are
* not considered.
*/
out = omapdss_find_output_from_display(dssdev);
channel = out->dispc_channel;
omap_dss_put_device(out);
/*
* if this channel hasn't already been taken by a previously
* allocated crtc, we create a new crtc for it
*/
if (!channel_used(dev, channel)) {
ret = omap_modeset_create_crtc(dev, id, channel,
possible_crtcs);
if (ret < 0) {
dev_err(dev->dev,
"could not create CRTC (channel %u)\n",
channel);
return ret;
}
id++;
}
}
/*
* we have allocated crtcs according to the need of the panels/encoders,
* adding more crtcs here if needed
*/
for (; id < num_crtcs; id++) {
/* find a free manager for this crtc */
for (i = 0; i < num_mgrs; i++) {
if (!channel_used(dev, i))
break;
}
if (i == num_mgrs) {
/* this shouldn't really happen */
dev_err(dev->dev, "no managers left for crtc\n");
return -ENOMEM;
}
ret = omap_modeset_create_crtc(dev, id, i,
possible_crtcs);
if (ret < 0) {
dev_err(dev->dev,
"could not create CRTC (channel %u)\n", i);
return ret;
}
}
/*
* Create normal planes for the remaining overlays:
*/
for (; id < num_ovls; id++) {
struct drm_plane *plane;
plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_OVERLAY,
possible_crtcs);
if (IS_ERR(plane))
return PTR_ERR(plane);
BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
priv->planes[priv->num_planes++] = plane;
}
for (i = 0; i < priv->num_encoders; i++) {
struct drm_encoder *encoder = priv->encoders[i];
struct omap_dss_device *dssdev =
omap_encoder_get_dssdev(encoder);
struct omap_dss_device *output;
output = omapdss_find_output_from_display(dssdev);
/* figure out which crtc's we can connect the encoder to: */
encoder->possible_crtcs = 0;
for (id = 0; id < priv->num_crtcs; id++) {
struct drm_crtc *crtc = priv->crtcs[id];
enum omap_channel crtc_channel;
crtc_channel = omap_crtc_channel(crtc);
if (output->dispc_channel == crtc_channel) {
encoder->possible_crtcs |= (1 << id);
break;
}
}
omap_dss_put_device(output);
}
DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n",
priv->num_planes, priv->num_crtcs, priv->num_encoders,
priv->num_connectors);
dev->mode_config.min_width = 32;
dev->mode_config.min_height = 32;
/* note: eventually will need some cpu_is_omapXYZ() type stuff here
* to fill in these limits properly on different OMAP generations..
*/
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
dev->mode_config.funcs = &omap_mode_config_funcs;
drm_mode_config_reset(dev);
omap_drm_irq_install(dev);
return 0;
}
static void omap_modeset_free(struct drm_device *dev)
{
drm_mode_config_cleanup(dev);
}
/*
* drm ioctl funcs
*/
static int ioctl_get_param(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct omap_drm_private *priv = dev->dev_private;
struct drm_omap_param *args = data;
DBG("%p: param=%llu", dev, args->param);
switch (args->param) {
case OMAP_PARAM_CHIPSET_ID:
args->value = priv->omaprev;
break;
default:
DBG("unknown parameter %lld", args->param);
return -EINVAL;
}
return 0;
}
static int ioctl_set_param(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_param *args = data;
switch (args->param) {
default:
DBG("unknown parameter %lld", args->param);
return -EINVAL;
}
return 0;
}
#define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */
static int ioctl_gem_new(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_new *args = data;
u32 flags = args->flags & OMAP_BO_USER_MASK;
VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
args->size.bytes, flags);
return omap_gem_new_handle(dev, file_priv, args->size, flags,
&args->handle);
}
static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_cpu_prep *args = data;
struct drm_gem_object *obj;
int ret;
VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op);
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
return -ENOENT;
ret = omap_gem_op_sync(obj, args->op);
if (!ret)
ret = omap_gem_op_start(obj, args->op);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_cpu_fini *args = data;
struct drm_gem_object *obj;
int ret;
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
return -ENOENT;
/* XXX flushy, flushy */
ret = 0;
if (!ret)
ret = omap_gem_op_finish(obj, args->op);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int ioctl_gem_info(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_info *args = data;
struct drm_gem_object *obj;
int ret = 0;
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
return -ENOENT;
args->size = omap_gem_mmap_size(obj);
args->offset = omap_gem_mmap_offset(obj);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_AUTH),
};
/*
* drm driver funcs
*/
/**
* load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
static int dev_load(struct drm_device *dev, unsigned long flags)
{
struct omap_drm_platform_data *pdata = dev->dev->platform_data;
struct omap_drm_private *priv;
unsigned int i;
int ret;
DBG("load: dev=%p", dev);
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->omaprev = pdata->omaprev;
dev->dev_private = priv;
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
init_waitqueue_head(&priv->commit.wait);
spin_lock_init(&priv->commit.lock);
spin_lock_init(&priv->list_lock);
INIT_LIST_HEAD(&priv->obj_list);
omap_gem_init(dev);
ret = omap_modeset_init(dev);
if (ret) {
dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret);
dev->dev_private = NULL;
kfree(priv);
return ret;
}
/* Initialize vblank handling, start with all CRTCs disabled. */
ret = drm_vblank_init(dev, priv->num_crtcs);
if (ret)
dev_warn(dev->dev, "could not init vblank\n");
for (i = 0; i < priv->num_crtcs; i++)
drm_crtc_vblank_off(priv->crtcs[i]);
priv->fbdev = omap_fbdev_init(dev);
/* store off drm_device for use in pm ops */
dev_set_drvdata(dev->dev, dev);
drm_kms_helper_poll_init(dev);
return 0;
}
static int dev_unload(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
DBG("unload: dev=%p", dev);
drm_kms_helper_poll_fini(dev);
if (priv->fbdev)
omap_fbdev_free(dev);
omap_modeset_free(dev);
omap_gem_deinit(dev);
destroy_workqueue(priv->wq);
drm_vblank_cleanup(dev);
omap_drm_irq_uninstall(dev);
kfree(dev->dev_private);
dev->dev_private = NULL;
dev_set_drvdata(dev->dev, NULL);
return 0;
}
static int dev_open(struct drm_device *dev, struct drm_file *file)
{
file->driver_priv = NULL;
DBG("open: dev=%p, file=%p", dev, file);
return 0;
}
/**
* lastclose - clean up after all DRM clients have exited
* @dev: DRM device
*
* Take care of cleaning up after all DRM clients have exited. In the
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*/
static void dev_lastclose(struct drm_device *dev)
{
int i;
/* we don't support vga_switcheroo.. so just make sure the fbdev
* mode is active
*/
struct omap_drm_private *priv = dev->dev_private;
int ret;
DBG("lastclose: dev=%p", dev);
/* need to restore default rotation state.. not sure
* if there is a cleaner way to restore properties to
* default state? Maybe a flag that properties should
* automatically be restored to default state on
* lastclose?
*/
for (i = 0; i < priv->num_crtcs; i++) {
struct drm_crtc *crtc = priv->crtcs[i];
if (!crtc->primary->rotation_property)
continue;
drm_object_property_set_value(&crtc->base,
crtc->primary->rotation_property,
DRM_ROTATE_0);
}
for (i = 0; i < priv->num_planes; i++) {
struct drm_plane *plane = priv->planes[i];
if (!plane->rotation_property)
continue;
drm_object_property_set_value(&plane->base,
plane->rotation_property,
DRM_ROTATE_0);
}
if (priv->fbdev) {
ret = drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev);
if (ret)
DBG("failed to restore crtc mode");
}
}
static const struct vm_operations_struct omap_gem_vm_ops = {
.fault = omap_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static const struct file_operations omapdriver_fops = {
.owner = THIS_MODULE,
.open = drm_open,
.unlocked_ioctl = drm_ioctl,
.release = drm_release,
.mmap = omap_gem_mmap,
.poll = drm_poll,
.read = drm_read,
.llseek = noop_llseek,
};
static struct drm_driver omap_drm_driver = {
.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
DRIVER_ATOMIC,
.load = dev_load,
.unload = dev_unload,
.open = dev_open,
.lastclose = dev_lastclose,
.get_vblank_counter = drm_vblank_no_hw_counter,
.enable_vblank = omap_irq_enable_vblank,
.disable_vblank = omap_irq_disable_vblank,
#ifdef CONFIG_DEBUG_FS
.debugfs_init = omap_debugfs_init,
.debugfs_cleanup = omap_debugfs_cleanup,
#endif
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_export = omap_gem_prime_export,
.gem_prime_import = omap_gem_prime_import,
.gem_free_object = omap_gem_free_object,
.gem_vm_ops = &omap_gem_vm_ops,
.dumb_create = omap_gem_dumb_create,
.dumb_map_offset = omap_gem_dumb_map_offset,
.dumb_destroy = drm_gem_dumb_destroy,
.ioctls = ioctls,
.num_ioctls = DRM_OMAP_NUM_IOCTLS,
.fops = &omapdriver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static int pdev_probe(struct platform_device *device)
{
int r;
if (omapdss_is_initialized() == false)
return -EPROBE_DEFER;
omap_crtc_pre_init();
r = omap_connect_dssdevs();
if (r) {
omap_crtc_pre_uninit();
return r;
}
DBG("%s", device->name);
return drm_platform_init(&omap_drm_driver, device);
}
static int pdev_remove(struct platform_device *device)
{
DBG("");
drm_put_dev(platform_get_drvdata(device));
omap_disconnect_dssdevs();
omap_crtc_pre_uninit();
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int omap_drm_suspend_all_displays(void)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
if (!dssdev->driver)
continue;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
dssdev->driver->disable(dssdev);
dssdev->activate_after_resume = true;
} else {
dssdev->activate_after_resume = false;
}
}
return 0;
}
static int omap_drm_resume_all_displays(void)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
if (!dssdev->driver)
continue;
if (dssdev->activate_after_resume) {
dssdev->driver->enable(dssdev);
dssdev->activate_after_resume = false;
}
}
return 0;
}
static int omap_drm_suspend(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
drm_kms_helper_poll_disable(drm_dev);
drm_modeset_lock_all(drm_dev);
omap_drm_suspend_all_displays();
drm_modeset_unlock_all(drm_dev);
return 0;
}
static int omap_drm_resume(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
drm_modeset_lock_all(drm_dev);
omap_drm_resume_all_displays();
drm_modeset_unlock_all(drm_dev);
drm_kms_helper_poll_enable(drm_dev);
return omap_gem_resume(dev);
}
#endif
static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume);
static struct platform_driver pdev = {
.driver = {
.name = DRIVER_NAME,
.pm = &omapdrm_pm_ops,
},
.probe = pdev_probe,
.remove = pdev_remove,
};
static struct platform_driver * const drivers[] = {
&omap_dmm_driver,
&pdev,
};
static int __init omap_drm_init(void)
{
DBG("init");
return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
}
static void __exit omap_drm_fini(void)
{
DBG("fini");
platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
}
/* need late_initcall() so we load after dss_driver's are loaded */
late_initcall(omap_drm_init);
module_exit(omap_drm_fini);
MODULE_AUTHOR("Rob Clark <rob@ti.com>");
MODULE_DESCRIPTION("OMAP DRM Display Driver");
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL v2");