mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:26:42 +07:00
c4900be053
This patch adds support for SFP+ PHY in the following device ID's (10DB, 10F1, 10E1). These SFP+ PHY's are accessed via an I2C interface so the patch also includes functions to support this. Another feature of note is that the PHY is pluggable and some rearchitecting was needed to support this. Signed-off-by: Donald Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
755 lines
21 KiB
C
755 lines
21 KiB
C
/*******************************************************************************
|
|
|
|
Intel 10 Gigabit PCI Express Linux driver
|
|
Copyright(c) 1999 - 2008 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include "ixgbe_common.h"
|
|
#include "ixgbe_phy.h"
|
|
|
|
static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
|
|
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
|
|
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
|
|
|
|
/**
|
|
* ixgbe_identify_phy_generic - Get physical layer module
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines the physical layer module found on the current adapter.
|
|
**/
|
|
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
|
|
u32 phy_addr;
|
|
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
|
|
if (ixgbe_validate_phy_addr(hw, phy_addr)) {
|
|
hw->phy.addr = phy_addr;
|
|
ixgbe_get_phy_id(hw);
|
|
hw->phy.type =
|
|
ixgbe_get_phy_type_from_id(hw->phy.id);
|
|
status = 0;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
status = 0;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_validate_phy_addr - Determines phy address is valid
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
|
|
{
|
|
u16 phy_id = 0;
|
|
bool valid = false;
|
|
|
|
hw->phy.addr = phy_addr;
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
|
|
|
|
if (phy_id != 0xFFFF && phy_id != 0x0)
|
|
valid = true;
|
|
|
|
return valid;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_id - Get the phy type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
|
|
{
|
|
u32 status;
|
|
u16 phy_id_high = 0;
|
|
u16 phy_id_low = 0;
|
|
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&phy_id_high);
|
|
|
|
if (status == 0) {
|
|
hw->phy.id = (u32)(phy_id_high << 16);
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&phy_id_low);
|
|
hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
|
|
hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_type_from_id - Get the phy type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
|
|
{
|
|
enum ixgbe_phy_type phy_type;
|
|
|
|
switch (phy_id) {
|
|
case TN1010_PHY_ID:
|
|
phy_type = ixgbe_phy_tn;
|
|
break;
|
|
case QT2022_PHY_ID:
|
|
phy_type = ixgbe_phy_qt;
|
|
break;
|
|
case ATH_PHY_ID:
|
|
phy_type = ixgbe_phy_nl;
|
|
break;
|
|
default:
|
|
phy_type = ixgbe_phy_unknown;
|
|
break;
|
|
}
|
|
|
|
return phy_type;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_phy_generic - Performs a PHY reset
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
|
|
{
|
|
/*
|
|
* Perform soft PHY reset to the PHY_XS.
|
|
* This will cause a soft reset to the PHY
|
|
*/
|
|
return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE,
|
|
IXGBE_MDIO_PHY_XS_RESET);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit address of PHY register to read
|
|
* @phy_data: Pointer to read data from PHY register
|
|
**/
|
|
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 *phy_data)
|
|
{
|
|
u32 command;
|
|
u32 i;
|
|
u32 data;
|
|
s32 status = 0;
|
|
u16 gssr;
|
|
|
|
if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
|
|
gssr = IXGBE_GSSR_PHY1_SM;
|
|
else
|
|
gssr = IXGBE_GSSR_PHY0_SM;
|
|
|
|
if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
|
|
status = IXGBE_ERR_SWFW_SYNC;
|
|
|
|
if (status == 0) {
|
|
/* Setup and write the address cycle command */
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle completed.
|
|
* The MDI Command bit will clear when the operation is
|
|
* complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY address command did not complete.\n");
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
|
|
if (status == 0) {
|
|
/*
|
|
* Address cycle complete, setup and write the read
|
|
* command
|
|
*/
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle
|
|
* completed. The MDI Command bit will clear when the
|
|
* operation is complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY read command didn't complete\n");
|
|
status = IXGBE_ERR_PHY;
|
|
} else {
|
|
/*
|
|
* Read operation is complete. Get the data
|
|
* from MSRWD
|
|
*/
|
|
data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
|
|
data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
|
|
*phy_data = (u16)(data);
|
|
}
|
|
}
|
|
|
|
ixgbe_release_swfw_sync(hw, gssr);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit PHY register to write
|
|
* @device_type: 5 bit device type
|
|
* @phy_data: Data to write to the PHY register
|
|
**/
|
|
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 phy_data)
|
|
{
|
|
u32 command;
|
|
u32 i;
|
|
s32 status = 0;
|
|
u16 gssr;
|
|
|
|
if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
|
|
gssr = IXGBE_GSSR_PHY1_SM;
|
|
else
|
|
gssr = IXGBE_GSSR_PHY0_SM;
|
|
|
|
if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
|
|
status = IXGBE_ERR_SWFW_SYNC;
|
|
|
|
if (status == 0) {
|
|
/* Put the data in the MDI single read and write data register*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
|
|
|
|
/* Setup and write the address cycle command */
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle completed.
|
|
* The MDI Command bit will clear when the operation is
|
|
* complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY address cmd didn't complete\n");
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
|
|
if (status == 0) {
|
|
/*
|
|
* Address cycle complete, setup and write the write
|
|
* command
|
|
*/
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle
|
|
* completed. The MDI Command bit will clear when the
|
|
* operation is complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY address cmd didn't complete\n");
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
}
|
|
|
|
ixgbe_release_swfw_sync(hw, gssr);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_generic - Set and restart autoneg
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Restart autonegotiation and PHY and waits for completion.
|
|
**/
|
|
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_NOT_IMPLEMENTED;
|
|
u32 time_out;
|
|
u32 max_time_out = 10;
|
|
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
|
|
|
|
/*
|
|
* Set advertisement settings in PHY based on autoneg_advertised
|
|
* settings. If autoneg_advertised = 0, then advertise default values
|
|
* tnx devices cannot be "forced" to a autoneg 10G and fail. But can
|
|
* for a 1G.
|
|
*/
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
|
|
|
|
if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
|
|
autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
|
|
else
|
|
autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
|
|
|
|
/* Restart PHY autonegotiation and wait for completion */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
|
|
|
|
autoneg_reg |= IXGBE_MII_RESTART;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
|
|
|
|
/* Wait for autonegotiation to finish */
|
|
for (time_out = 0; time_out < max_time_out; time_out++) {
|
|
udelay(10);
|
|
/* Restart PHY autonegotiation and wait for completion */
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
|
|
if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
|
|
status = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (time_out == max_time_out)
|
|
status = IXGBE_ERR_LINK_SETUP;
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg: true if autonegotiation enabled
|
|
**/
|
|
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
|
|
/*
|
|
* Clear autoneg_advertised and set new values based on input link
|
|
* speed.
|
|
*/
|
|
hw->phy.autoneg_advertised = 0;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
|
|
/* Setup link based on the new speed settings */
|
|
hw->phy.ops.setup_link(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_phy_nl - Performs a PHY reset
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
|
|
{
|
|
u16 phy_offset, control, eword, edata, block_crc;
|
|
bool end_data = false;
|
|
u16 list_offset, data_offset;
|
|
u16 phy_data = 0;
|
|
s32 ret_val = 0;
|
|
u32 i;
|
|
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
|
|
|
|
/* reset the PHY and poll for completion */
|
|
hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE,
|
|
(phy_data | IXGBE_MDIO_PHY_XS_RESET));
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
|
|
if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
|
|
break;
|
|
msleep(10);
|
|
}
|
|
|
|
if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
|
|
hw_dbg(hw, "PHY reset did not complete.\n");
|
|
ret_val = IXGBE_ERR_PHY;
|
|
goto out;
|
|
}
|
|
|
|
/* Get init offsets */
|
|
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
|
|
&data_offset);
|
|
if (ret_val != 0)
|
|
goto out;
|
|
|
|
ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
|
|
data_offset++;
|
|
while (!end_data) {
|
|
/*
|
|
* Read control word from PHY init contents offset
|
|
*/
|
|
ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
|
|
control = (eword & IXGBE_CONTROL_MASK_NL) >>
|
|
IXGBE_CONTROL_SHIFT_NL;
|
|
edata = eword & IXGBE_DATA_MASK_NL;
|
|
switch (control) {
|
|
case IXGBE_DELAY_NL:
|
|
data_offset++;
|
|
hw_dbg(hw, "DELAY: %d MS\n", edata);
|
|
msleep(edata);
|
|
break;
|
|
case IXGBE_DATA_NL:
|
|
hw_dbg(hw, "DATA: \n");
|
|
data_offset++;
|
|
hw->eeprom.ops.read(hw, data_offset++,
|
|
&phy_offset);
|
|
for (i = 0; i < edata; i++) {
|
|
hw->eeprom.ops.read(hw, data_offset, &eword);
|
|
hw->phy.ops.write_reg(hw, phy_offset,
|
|
IXGBE_TWINAX_DEV, eword);
|
|
hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
|
|
phy_offset);
|
|
data_offset++;
|
|
phy_offset++;
|
|
}
|
|
break;
|
|
case IXGBE_CONTROL_NL:
|
|
data_offset++;
|
|
hw_dbg(hw, "CONTROL: \n");
|
|
if (edata == IXGBE_CONTROL_EOL_NL) {
|
|
hw_dbg(hw, "EOL\n");
|
|
end_data = true;
|
|
} else if (edata == IXGBE_CONTROL_SOL_NL) {
|
|
hw_dbg(hw, "SOL\n");
|
|
} else {
|
|
hw_dbg(hw, "Bad control value\n");
|
|
ret_val = IXGBE_ERR_PHY;
|
|
goto out;
|
|
}
|
|
break;
|
|
default:
|
|
hw_dbg(hw, "Bad control type\n");
|
|
ret_val = IXGBE_ERR_PHY;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns
|
|
* the PHY type.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Searches for and indentifies the SFP module. Assings appropriate PHY type.
|
|
**/
|
|
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
|
|
u32 vendor_oui = 0;
|
|
u8 identifier = 0;
|
|
u8 comp_codes_1g = 0;
|
|
u8 comp_codes_10g = 0;
|
|
u8 oui_bytes[4] = {0, 0, 0, 0};
|
|
u8 transmission_media = 0;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
|
|
&identifier);
|
|
|
|
if (status == IXGBE_ERR_SFP_NOT_PRESENT) {
|
|
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
|
|
goto out;
|
|
}
|
|
|
|
if (identifier == IXGBE_SFF_IDENTIFIER_SFP) {
|
|
hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES,
|
|
&comp_codes_1g);
|
|
hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
|
|
&comp_codes_10g);
|
|
hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
|
|
&transmission_media);
|
|
|
|
/* ID Module
|
|
* =========
|
|
* 0 SFP_DA_CU
|
|
* 1 SFP_SR
|
|
* 2 SFP_LR
|
|
*/
|
|
if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
|
|
else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_sr;
|
|
else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_lr;
|
|
else
|
|
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
|
|
|
|
/* Determine PHY vendor */
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
hw->phy.id = identifier;
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_VENDOR_OUI_BYTE0,
|
|
&oui_bytes[0]);
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_VENDOR_OUI_BYTE1,
|
|
&oui_bytes[1]);
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_VENDOR_OUI_BYTE2,
|
|
&oui_bytes[2]);
|
|
|
|
vendor_oui =
|
|
((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
|
|
(oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
|
|
(oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
|
|
|
|
switch (vendor_oui) {
|
|
case IXGBE_SFF_VENDOR_OUI_TYCO:
|
|
if (transmission_media &
|
|
IXGBE_SFF_TWIN_AX_CAPABLE)
|
|
hw->phy.type = ixgbe_phy_tw_tyco;
|
|
break;
|
|
case IXGBE_SFF_VENDOR_OUI_FTL:
|
|
hw->phy.type = ixgbe_phy_sfp_ftl;
|
|
break;
|
|
case IXGBE_SFF_VENDOR_OUI_AVAGO:
|
|
hw->phy.type = ixgbe_phy_sfp_avago;
|
|
break;
|
|
default:
|
|
if (transmission_media &
|
|
IXGBE_SFF_TWIN_AX_CAPABLE)
|
|
hw->phy.type = ixgbe_phy_tw_unknown;
|
|
else
|
|
hw->phy.type = ixgbe_phy_sfp_unknown;
|
|
break;
|
|
}
|
|
}
|
|
status = 0;
|
|
}
|
|
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see
|
|
* if it supports a given SFP+ module type, if so it returns the offsets to the
|
|
* phy init sequence block.
|
|
* @hw: pointer to hardware structure
|
|
* @list_offset: offset to the SFP ID list
|
|
* @data_offset: offset to the SFP data block
|
|
**/
|
|
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
|
|
u16 *list_offset,
|
|
u16 *data_offset)
|
|
{
|
|
u16 sfp_id;
|
|
|
|
if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
|
|
if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
|
|
return IXGBE_ERR_SFP_NOT_PRESENT;
|
|
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
|
|
/* Read offset to PHY init contents */
|
|
hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
|
|
|
|
if ((!*list_offset) || (*list_offset == 0xFFFF))
|
|
return IXGBE_ERR_PHY;
|
|
|
|
/* Shift offset to first ID word */
|
|
(*list_offset)++;
|
|
|
|
/*
|
|
* Find the matching SFP ID in the EEPROM
|
|
* and program the init sequence
|
|
*/
|
|
hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
|
|
|
|
while (sfp_id != IXGBE_PHY_INIT_END_NL) {
|
|
if (sfp_id == hw->phy.sfp_type) {
|
|
(*list_offset)++;
|
|
hw->eeprom.ops.read(hw, *list_offset, data_offset);
|
|
if ((!*data_offset) || (*data_offset == 0xFFFF)) {
|
|
hw_dbg(hw, "SFP+ module not supported\n");
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
} else {
|
|
break;
|
|
}
|
|
} else {
|
|
(*list_offset) += 2;
|
|
if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
}
|
|
|
|
if (sfp_id == IXGBE_PHY_INIT_END_NL) {
|
|
hw_dbg(hw, "No matching SFP+ module found\n");
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_phy_link_tnx - Determine link and speed status
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Reads the VS1 register to determine if link is up and the current speed for
|
|
* the PHY.
|
|
**/
|
|
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
|
bool *link_up)
|
|
{
|
|
s32 status = 0;
|
|
u32 time_out;
|
|
u32 max_time_out = 10;
|
|
u16 phy_link = 0;
|
|
u16 phy_speed = 0;
|
|
u16 phy_data = 0;
|
|
|
|
/* Initialize speed and link to default case */
|
|
*link_up = false;
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
/*
|
|
* Check current speed and link status of the PHY register.
|
|
* This is a vendor specific register and may have to
|
|
* be changed for other copper PHYs.
|
|
*/
|
|
for (time_out = 0; time_out < max_time_out; time_out++) {
|
|
udelay(10);
|
|
status = hw->phy.ops.read_reg(hw,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
&phy_data);
|
|
phy_link = phy_data &
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
|
|
phy_speed = phy_data &
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
|
|
if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
|
|
*link_up = true;
|
|
if (phy_speed ==
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
|
|
* @hw: pointer to hardware structure
|
|
* @firmware_version: pointer to the PHY Firmware Version
|
|
**/
|
|
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
|
|
u16 *firmware_version)
|
|
{
|
|
s32 status = 0;
|
|
|
|
status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
firmware_version);
|
|
|
|
return status;
|
|
}
|
|
|