mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:49:08 +07:00
604c78235a
Currently, the IRQs are disabled when the rtc character device is closed. This means that the device needs to stay open to get alarms while the usual use case will open the device, set the alarm and close the device as is done in rtcwake. Keep the alarm functional on character device release so the platform can actually wakeup. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
486 lines
12 KiB
C
486 lines
12 KiB
C
/*
|
|
* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
|
|
#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
|
|
#define RTC_INPUT_CLK_38400HZ (0x02 << 5)
|
|
|
|
#define RTC_SW_BIT (1 << 0)
|
|
#define RTC_ALM_BIT (1 << 2)
|
|
#define RTC_1HZ_BIT (1 << 4)
|
|
#define RTC_2HZ_BIT (1 << 7)
|
|
#define RTC_SAM0_BIT (1 << 8)
|
|
#define RTC_SAM1_BIT (1 << 9)
|
|
#define RTC_SAM2_BIT (1 << 10)
|
|
#define RTC_SAM3_BIT (1 << 11)
|
|
#define RTC_SAM4_BIT (1 << 12)
|
|
#define RTC_SAM5_BIT (1 << 13)
|
|
#define RTC_SAM6_BIT (1 << 14)
|
|
#define RTC_SAM7_BIT (1 << 15)
|
|
#define PIT_ALL_ON (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
|
|
RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
|
|
RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
|
|
|
|
#define RTC_ENABLE_BIT (1 << 7)
|
|
|
|
#define MAX_PIE_NUM 9
|
|
#define MAX_PIE_FREQ 512
|
|
|
|
#define MXC_RTC_TIME 0
|
|
#define MXC_RTC_ALARM 1
|
|
|
|
#define RTC_HOURMIN 0x00 /* 32bit rtc hour/min counter reg */
|
|
#define RTC_SECOND 0x04 /* 32bit rtc seconds counter reg */
|
|
#define RTC_ALRM_HM 0x08 /* 32bit rtc alarm hour/min reg */
|
|
#define RTC_ALRM_SEC 0x0C /* 32bit rtc alarm seconds reg */
|
|
#define RTC_RTCCTL 0x10 /* 32bit rtc control reg */
|
|
#define RTC_RTCISR 0x14 /* 32bit rtc interrupt status reg */
|
|
#define RTC_RTCIENR 0x18 /* 32bit rtc interrupt enable reg */
|
|
#define RTC_STPWCH 0x1C /* 32bit rtc stopwatch min reg */
|
|
#define RTC_DAYR 0x20 /* 32bit rtc days counter reg */
|
|
#define RTC_DAYALARM 0x24 /* 32bit rtc day alarm reg */
|
|
#define RTC_TEST1 0x28 /* 32bit rtc test reg 1 */
|
|
#define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */
|
|
#define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */
|
|
|
|
enum imx_rtc_type {
|
|
IMX1_RTC,
|
|
IMX21_RTC,
|
|
};
|
|
|
|
struct rtc_plat_data {
|
|
struct rtc_device *rtc;
|
|
void __iomem *ioaddr;
|
|
int irq;
|
|
struct clk *clk_ref;
|
|
struct clk *clk_ipg;
|
|
struct rtc_time g_rtc_alarm;
|
|
enum imx_rtc_type devtype;
|
|
};
|
|
|
|
static const struct platform_device_id imx_rtc_devtype[] = {
|
|
{
|
|
.name = "imx1-rtc",
|
|
.driver_data = IMX1_RTC,
|
|
}, {
|
|
.name = "imx21-rtc",
|
|
.driver_data = IMX21_RTC,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id imx_rtc_dt_ids[] = {
|
|
{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
|
|
{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
|
|
#endif
|
|
|
|
static inline int is_imx1_rtc(struct rtc_plat_data *data)
|
|
{
|
|
return data->devtype == IMX1_RTC;
|
|
}
|
|
|
|
/*
|
|
* This function is used to obtain the RTC time or the alarm value in
|
|
* second.
|
|
*/
|
|
static time64_t get_alarm_or_time(struct device *dev, int time_alarm)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
|
|
|
|
switch (time_alarm) {
|
|
case MXC_RTC_TIME:
|
|
day = readw(ioaddr + RTC_DAYR);
|
|
hr_min = readw(ioaddr + RTC_HOURMIN);
|
|
sec = readw(ioaddr + RTC_SECOND);
|
|
break;
|
|
case MXC_RTC_ALARM:
|
|
day = readw(ioaddr + RTC_DAYALARM);
|
|
hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
|
|
sec = readw(ioaddr + RTC_ALRM_SEC);
|
|
break;
|
|
}
|
|
|
|
hr = hr_min >> 8;
|
|
min = hr_min & 0xff;
|
|
|
|
return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec;
|
|
}
|
|
|
|
/*
|
|
* This function sets the RTC alarm value or the time value.
|
|
*/
|
|
static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time)
|
|
{
|
|
u32 tod, day, hr, min, sec, temp;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
|
|
day = div_s64_rem(time, 86400, &tod);
|
|
|
|
/* time is within a day now */
|
|
hr = tod / 3600;
|
|
tod -= hr * 3600;
|
|
|
|
/* time is within an hour now */
|
|
min = tod / 60;
|
|
sec = tod - min * 60;
|
|
|
|
temp = (hr << 8) + min;
|
|
|
|
switch (time_alarm) {
|
|
case MXC_RTC_TIME:
|
|
writew(day, ioaddr + RTC_DAYR);
|
|
writew(sec, ioaddr + RTC_SECOND);
|
|
writew(temp, ioaddr + RTC_HOURMIN);
|
|
break;
|
|
case MXC_RTC_ALARM:
|
|
writew(day, ioaddr + RTC_DAYALARM);
|
|
writew(sec, ioaddr + RTC_ALRM_SEC);
|
|
writew(temp, ioaddr + RTC_ALRM_HM);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function updates the RTC alarm registers and then clears all the
|
|
* interrupt status bits.
|
|
*/
|
|
static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
|
|
{
|
|
time64_t time;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
|
|
time = rtc_tm_to_time64(alrm);
|
|
|
|
/* clear all the interrupt status bits */
|
|
writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
|
|
set_alarm_or_time(dev, MXC_RTC_ALARM, time);
|
|
}
|
|
|
|
static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
|
|
unsigned int enabled)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
u32 reg;
|
|
|
|
spin_lock_irq(&pdata->rtc->irq_lock);
|
|
reg = readw(ioaddr + RTC_RTCIENR);
|
|
|
|
if (enabled)
|
|
reg |= bit;
|
|
else
|
|
reg &= ~bit;
|
|
|
|
writew(reg, ioaddr + RTC_RTCIENR);
|
|
spin_unlock_irq(&pdata->rtc->irq_lock);
|
|
}
|
|
|
|
/* This function is the RTC interrupt service routine. */
|
|
static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct platform_device *pdev = dev_id;
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
unsigned long flags;
|
|
u32 status;
|
|
u32 events = 0;
|
|
|
|
spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
|
|
status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
|
|
/* clear interrupt sources */
|
|
writew(status, ioaddr + RTC_RTCISR);
|
|
|
|
/* update irq data & counter */
|
|
if (status & RTC_ALM_BIT) {
|
|
events |= (RTC_AF | RTC_IRQF);
|
|
/* RTC alarm should be one-shot */
|
|
mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
|
|
}
|
|
|
|
if (status & PIT_ALL_ON)
|
|
events |= (RTC_PF | RTC_IRQF);
|
|
|
|
rtc_update_irq(pdata->rtc, 1, events);
|
|
spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function reads the current RTC time into tm in Gregorian date.
|
|
*/
|
|
static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
time64_t val;
|
|
|
|
/* Avoid roll-over from reading the different registers */
|
|
do {
|
|
val = get_alarm_or_time(dev, MXC_RTC_TIME);
|
|
} while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
|
|
|
|
rtc_time64_to_tm(val, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function sets the internal RTC time based on tm in Gregorian date.
|
|
*/
|
|
static int mxc_rtc_set_mmss(struct device *dev, time64_t time)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
|
|
/*
|
|
* TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only
|
|
*/
|
|
if (is_imx1_rtc(pdata)) {
|
|
struct rtc_time tm;
|
|
|
|
rtc_time64_to_tm(time, &tm);
|
|
tm.tm_year = 70;
|
|
time = rtc_tm_to_time64(&tm);
|
|
}
|
|
|
|
/* Avoid roll-over from reading the different registers */
|
|
do {
|
|
set_alarm_or_time(dev, MXC_RTC_TIME, time);
|
|
} while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function reads the current alarm value into the passed in 'alrm'
|
|
* argument. It updates the alrm's pending field value based on the whether
|
|
* an alarm interrupt occurs or not.
|
|
*/
|
|
static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
|
|
rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
|
|
alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function sets the RTC alarm based on passed in alrm.
|
|
*/
|
|
static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
|
|
rtc_update_alarm(dev, &alrm->time);
|
|
|
|
memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
|
|
mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* RTC layer */
|
|
static const struct rtc_class_ops mxc_rtc_ops = {
|
|
.read_time = mxc_rtc_read_time,
|
|
.set_mmss64 = mxc_rtc_set_mmss,
|
|
.read_alarm = mxc_rtc_read_alarm,
|
|
.set_alarm = mxc_rtc_set_alarm,
|
|
.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static int mxc_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct rtc_device *rtc;
|
|
struct rtc_plat_data *pdata = NULL;
|
|
u32 reg;
|
|
unsigned long rate;
|
|
int ret;
|
|
const struct of_device_id *of_id;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
|
|
if (of_id)
|
|
pdata->devtype = (enum imx_rtc_type)of_id->data;
|
|
else
|
|
pdata->devtype = pdev->id_entry->driver_data;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(pdata->ioaddr))
|
|
return PTR_ERR(pdata->ioaddr);
|
|
|
|
pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(pdata->clk_ipg)) {
|
|
dev_err(&pdev->dev, "unable to get ipg clock!\n");
|
|
return PTR_ERR(pdata->clk_ipg);
|
|
}
|
|
|
|
ret = clk_prepare_enable(pdata->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
|
|
if (IS_ERR(pdata->clk_ref)) {
|
|
dev_err(&pdev->dev, "unable to get ref clock!\n");
|
|
ret = PTR_ERR(pdata->clk_ref);
|
|
goto exit_put_clk_ipg;
|
|
}
|
|
|
|
ret = clk_prepare_enable(pdata->clk_ref);
|
|
if (ret)
|
|
goto exit_put_clk_ipg;
|
|
|
|
rate = clk_get_rate(pdata->clk_ref);
|
|
|
|
if (rate == 32768)
|
|
reg = RTC_INPUT_CLK_32768HZ;
|
|
else if (rate == 32000)
|
|
reg = RTC_INPUT_CLK_32000HZ;
|
|
else if (rate == 38400)
|
|
reg = RTC_INPUT_CLK_38400HZ;
|
|
else {
|
|
dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
|
|
ret = -EINVAL;
|
|
goto exit_put_clk_ref;
|
|
}
|
|
|
|
reg |= RTC_ENABLE_BIT;
|
|
writew(reg, (pdata->ioaddr + RTC_RTCCTL));
|
|
if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
|
|
dev_err(&pdev->dev, "hardware module can't be enabled!\n");
|
|
ret = -EIO;
|
|
goto exit_put_clk_ref;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pdata);
|
|
|
|
/* Configure and enable the RTC */
|
|
pdata->irq = platform_get_irq(pdev, 0);
|
|
|
|
if (pdata->irq >= 0 &&
|
|
devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
|
|
IRQF_SHARED, pdev->name, pdev) < 0) {
|
|
dev_warn(&pdev->dev, "interrupt not available.\n");
|
|
pdata->irq = -1;
|
|
}
|
|
|
|
if (pdata->irq >= 0)
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops,
|
|
THIS_MODULE);
|
|
if (IS_ERR(rtc)) {
|
|
ret = PTR_ERR(rtc);
|
|
goto exit_put_clk_ref;
|
|
}
|
|
|
|
pdata->rtc = rtc;
|
|
|
|
return 0;
|
|
|
|
exit_put_clk_ref:
|
|
clk_disable_unprepare(pdata->clk_ref);
|
|
exit_put_clk_ipg:
|
|
clk_disable_unprepare(pdata->clk_ipg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxc_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(pdata->clk_ref);
|
|
clk_disable_unprepare(pdata->clk_ipg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mxc_rtc_suspend(struct device *dev)
|
|
{
|
|
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(pdata->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_rtc_resume(struct device *dev)
|
|
{
|
|
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(pdata->irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
|
|
|
|
static struct platform_driver mxc_rtc_driver = {
|
|
.driver = {
|
|
.name = "mxc_rtc",
|
|
.of_match_table = of_match_ptr(imx_rtc_dt_ids),
|
|
.pm = &mxc_rtc_pm_ops,
|
|
},
|
|
.id_table = imx_rtc_devtype,
|
|
.probe = mxc_rtc_probe,
|
|
.remove = mxc_rtc_remove,
|
|
};
|
|
|
|
module_platform_driver(mxc_rtc_driver)
|
|
|
|
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
|
|
MODULE_DESCRIPTION("RTC driver for Freescale MXC");
|
|
MODULE_LICENSE("GPL");
|
|
|