mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 07:26:28 +07:00
81777ff9dd
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
350 lines
9.4 KiB
Plaintext
350 lines
9.4 KiB
Plaintext
/*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "omap34xx.dtsi"
|
|
|
|
/* Secure omaps have some devices inaccessible depending on the firmware */
|
|
&aes {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sham {
|
|
status = "disabled";
|
|
};
|
|
|
|
/ {
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vcc>;
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
/* HS USB Port 2 Power */
|
|
hsusb2_power: hsusb2_power_reg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "hsusb2_vbus";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
|
|
startup-delay-us = <70000>;
|
|
};
|
|
|
|
/* HS USB Host PHY on PORT 2 */
|
|
hsusb2_phy: hsusb2_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
|
|
vcc-supply = <&hsusb2_power>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "ti,omap-twl4030";
|
|
ti,model = "omap3beagle";
|
|
|
|
/* McBSP2 is used for onboard sound, same as on beagle */
|
|
ti,mcbsp = <&mcbsp2>;
|
|
};
|
|
|
|
/* Regulator to enable/switch the vcc of the Wifi module */
|
|
mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "regulator-mmc2-sdio-poweron";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */
|
|
enable-active-low;
|
|
startup-delay-us = <10000>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
hsusbb2_pins: pinmux_hsusbb2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
|
|
OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
|
|
OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
|
|
OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
|
|
OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
|
|
OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
|
|
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
|
|
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
|
|
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
|
|
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
|
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
|
|
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
|
|
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
|
|
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
|
OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
|
|
OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
|
|
OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
|
|
OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
|
|
>;
|
|
};
|
|
|
|
mmc2_pins: pinmux_mmc2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
|
|
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
|
|
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
|
|
>;
|
|
};
|
|
|
|
/* wlan GPIO output for WLAN_EN */
|
|
wlan_gpio: pinmux_wlan_gpio {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */
|
|
>;
|
|
};
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
|
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
|
>;
|
|
};
|
|
|
|
i2c3_pins: pinmux_i2c3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */
|
|
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */
|
|
>;
|
|
};
|
|
|
|
mcspi1_pins: pinmux_mcspi1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
|
|
OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
|
|
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
|
|
OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
|
|
>;
|
|
};
|
|
|
|
mcspi3_pins: pinmux_mcspi3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
|
|
OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
|
|
OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
|
|
OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
|
|
>;
|
|
};
|
|
|
|
mcbsp3_pins: pinmux_mcbsp3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */
|
|
OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */
|
|
OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */
|
|
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */
|
|
>;
|
|
};
|
|
};
|
|
|
|
/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
|
|
&mcbsp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcbsp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <2600000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
interrupt-parent = <&intc>;
|
|
|
|
twl_audio: audio {
|
|
compatible = "ti,twl4030-audio";
|
|
codec {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
};
|
|
|
|
&mcspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi1_pins>;
|
|
|
|
spidev@0 {
|
|
compatible = "spidev";
|
|
spi-max-frequency = <48000000>;
|
|
reg = <0>;
|
|
spi-cpha;
|
|
};
|
|
};
|
|
|
|
&mcspi3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi3_pins>;
|
|
|
|
spidev@0 {
|
|
compatible = "spidev";
|
|
spi-max-frequency = <48000000>;
|
|
reg = <0>;
|
|
spi-cpha;
|
|
};
|
|
};
|
|
|
|
#include "twl4030.dtsi"
|
|
#include "twl4030_omap3.dtsi"
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <&vmmc1>;
|
|
vmmc_aux-supply = <&vsim>;
|
|
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
// WiFi (Marvell 88W8686) on MMC2/SDIO
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <&mmc2_sdio_poweron>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbhshost {
|
|
port2-mode = "ehci-phy";
|
|
};
|
|
|
|
&usbhsehci {
|
|
phys = <0 &hsusb2_phy>;
|
|
};
|
|
|
|
&twl_gpio {
|
|
ti,use-leds;
|
|
/* pullups: BIT(1) */
|
|
ti,pullups = <0x000002>;
|
|
/*
|
|
* pulldowns:
|
|
* BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
|
|
* BIT(15), BIT(16), BIT(17)
|
|
*/
|
|
ti,pulldowns = <0x03a1c4>;
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
};
|
|
|
|
&mcbsp3 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp3_pins>;
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
nand-bus-width = <16>;
|
|
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
|
|
ti,nand-ecc-opt = "sw";
|
|
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <36>;
|
|
gpmc,cs-wr-off-ns = <36>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <24>;
|
|
gpmc,adv-wr-off-ns = <36>;
|
|
gpmc,oe-on-ns = <6>;
|
|
gpmc,oe-off-ns = <48>;
|
|
gpmc,we-on-ns = <6>;
|
|
gpmc,we-off-ns = <30>;
|
|
gpmc,rd-cycle-ns = <72>;
|
|
gpmc,wr-cycle-ns = <72>;
|
|
gpmc,access-ns = <54>;
|
|
gpmc,wr-access-ns = <30>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
x-loader@0 {
|
|
label = "X-Loader";
|
|
reg = <0 0x80000>;
|
|
};
|
|
|
|
bootloaders@80000 {
|
|
label = "U-Boot";
|
|
reg = <0x80000 0x1e0000>;
|
|
};
|
|
|
|
bootloaders_env@260000 {
|
|
label = "U-Boot Env";
|
|
reg = <0x260000 0x20000>;
|
|
};
|
|
|
|
kernel@280000 {
|
|
label = "Kernel";
|
|
reg = <0x280000 0x400000>;
|
|
};
|
|
|
|
filesystem@680000 {
|
|
label = "File System";
|
|
reg = <0x680000 0xf980000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
interface-type = <0>;
|
|
usb-phy = <&usb2_phy>;
|
|
phys = <&usb2_phy>;
|
|
phy-names = "usb2-phy";
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&vaux2 {
|
|
regulator-name = "vdd_ehci";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|