mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
0aedc00851
Since USB2 is shared with local bus, either local bus or USB2 should be disabled. By default U-Boot enables local bus, so we have to disable USB2, otherwise kernel hangs: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 28, io base 0xffe22000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 <hangs here> Note that U-Boot doesn't clear 'status' property when it enables USB2, so we have to comment out the whole node. To enable USB2, one can issue 'setenv hwconfig usb2:dr_mode=<host|peripheral>' command at the U-Boot prompt. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
603 lines
13 KiB
Plaintext
603 lines
13 KiB
Plaintext
/*
|
|
* P1020 RDB Device Tree Source
|
|
*
|
|
* Copyright 2009 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/ {
|
|
model = "fsl,P1020";
|
|
compatible = "fsl,P1020RDB";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,P1020@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
PowerPC,P1020@1 {
|
|
device_type = "cpu";
|
|
reg = <0x1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
localbus@ffe05000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0 0xffe05000 0 0x1000>;
|
|
interrupts = <19 2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
|
|
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
|
|
0x1 0x0 0x0 0xffa00000 0x00040000
|
|
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x1000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 256KB for Vitesse 7385 Switch firmware */
|
|
reg = <0x0 0x00040000>;
|
|
label = "NOR (RO) Vitesse-7385 Firmware";
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
/* 256KB for DTB Image */
|
|
reg = <0x00040000 0x00040000>;
|
|
label = "NOR (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
/* 3.5 MB for Linux Kernel Image */
|
|
reg = <0x00080000 0x00380000>;
|
|
label = "NOR (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
/* 11MB for JFFS2 based Root file System */
|
|
reg = <0x00400000 0x00b00000>;
|
|
label = "NOR (RW) JFFS2 Root File System";
|
|
};
|
|
|
|
partition@f00000 {
|
|
/* This location must not be altered */
|
|
/* 512KB for u-boot Bootloader Image */
|
|
/* 512KB for u-boot Environment Variables */
|
|
reg = <0x00f00000 0x00100000>;
|
|
label = "NOR (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
nand@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1020-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <0x1 0x0 0x40000>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 1MB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00100000>;
|
|
label = "NAND (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 1MB for DTB Image */
|
|
reg = <0x00100000 0x00100000>;
|
|
label = "NAND (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00200000 0x00400000>;
|
|
label = "NAND (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@600000 {
|
|
/* 4MB for Compressed Root file System Image */
|
|
reg = <0x00600000 0x00400000>;
|
|
label = "NAND (RO) Compressed RFS Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@a00000 {
|
|
/* 7MB for JFFS2 based Root file System */
|
|
reg = <0x00a00000 0x00700000>;
|
|
label = "NAND (RW) JFFS2 Root File System";
|
|
};
|
|
|
|
partition@1100000 {
|
|
/* 15MB for JFFS2 based Root file System */
|
|
reg = <0x01100000 0x00f00000>;
|
|
label = "NAND (RW) Writable User area";
|
|
};
|
|
};
|
|
|
|
L2switch@2,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "vitesse-7385";
|
|
reg = <0x2 0x0 0x20000>;
|
|
};
|
|
|
|
};
|
|
|
|
soc@ffe00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,p1020-immr", "simple-bus";
|
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
bus-frequency = <0>; // Filled out by uboot.
|
|
|
|
ecm-law@0 {
|
|
compatible = "fsl,ecm-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <12>;
|
|
};
|
|
|
|
ecm@1000 {
|
|
compatible = "fsl,p1020-ecm", "fsl,ecm";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <16 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,p1020-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
rtc@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,espi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <59 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
mode = "cpu";
|
|
|
|
fsl_m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,espi-flash";
|
|
reg = <0>;
|
|
linux,modalias = "fsl_m25p80";
|
|
modal = "s25sl128b";
|
|
spi-max-frequency = <50000000>;
|
|
mode = <0>;
|
|
|
|
partition@0 {
|
|
/* 512KB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00080000>;
|
|
label = "SPI (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
/* 512KB for DTB Image */
|
|
reg = <0x00080000 0x00080000>;
|
|
label = "SPI (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00100000 0x00400000>;
|
|
label = "SPI (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@500000 {
|
|
/* 4MB for Compressed RFS Image */
|
|
reg = <0x00500000 0x00400000>;
|
|
label = "SPI (RO) Compressed RFS Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@900000 {
|
|
/* 7MB for JFFS2 based RFS */
|
|
reg = <0x00900000 0x00700000>;
|
|
label = "SPI (RW) JFFS2 RFS";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio: gpio-controller@f000 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8572-gpio";
|
|
reg = <0xf000 0x100>;
|
|
interrupts = <47 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
gpio-controller;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,p1020-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <32>; // 32 bytes
|
|
cache-size = <0x40000>; // L2,256K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
mdio@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x24000 0x1000 0xb0030 0x4>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <3 1>;
|
|
reg = <0x0>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
mdio@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,etsec2-tbi";
|
|
reg = <0x25000 0x1000 0xb1030 0x4>;
|
|
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@b0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&mpic>;
|
|
fixed-link = <1 1 1000 0 0>;
|
|
phy-connection-type = "rgmii-id";
|
|
|
|
queue-group@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xb0000 0x1000>;
|
|
interrupts = <29 2 30 2 34 2>;
|
|
};
|
|
|
|
queue-group@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xb4000 0x1000>;
|
|
interrupts = <17 2 18 2 24 2>;
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@b1000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy0>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-connection-type = "sgmii";
|
|
|
|
queue-group@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xb1000 0x1000>;
|
|
interrupts = <35 2 36 2 40 2>;
|
|
};
|
|
|
|
queue-group@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xb5000 0x1000>;
|
|
interrupts = <51 2 52 2 67 2>;
|
|
};
|
|
};
|
|
|
|
enet2: ethernet@b2000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
|
|
queue-group@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xb2000 0x1000>;
|
|
interrupts = <31 2 32 2 33 2>;
|
|
};
|
|
|
|
queue-group@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xb6000 0x1000>;
|
|
interrupts = <25 2 26 2 27 2>;
|
|
};
|
|
};
|
|
|
|
usb@22000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x22000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <28 0x2>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
/* USB2 is shared with localbus, so it must be disabled
|
|
by default. We can't put 'status = "disabled";' here
|
|
since U-Boot doesn't clear the status property when
|
|
it enables USB2. OTOH, U-Boot does create a new node
|
|
when there isn't any. So, just comment it out.
|
|
usb@23000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x23000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <46 0x2>;
|
|
phy_type = "ulpi";
|
|
};
|
|
*/
|
|
|
|
sdhci@2e000 {
|
|
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
|
|
reg = <0x2e000 0x1000>;
|
|
interrupts = <72 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
|
|
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2 58 2>;
|
|
interrupt-parent = <&mpic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0xbfe>;
|
|
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
msi@41600 {
|
|
compatible = "fsl,p1020-msi", "fsl,mpic-msi";
|
|
reg = <0x41600 0x80>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe0 0
|
|
0xe1 0
|
|
0xe2 0
|
|
0xe3 0
|
|
0xe4 0
|
|
0xe5 0
|
|
0xe6 0
|
|
0xe7 0>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
global-utilities@e0000 { //global utilities block
|
|
compatible = "fsl,p1020-guts";
|
|
reg = <0xe0000 0x1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe09000 {
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0 0xffe09000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe0a000 {
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0 0xffe0a000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xc0000000
|
|
0x2000000 0x0 0xc0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|