linux_dsm_epyc7002/drivers/net/wireless/p54/p54spi.c
Luis R. Rodriguez 80140b71e0 p54: use request_firmware_direct() for optional EEPROM override
The p54 driver uses request_firmware() twice, once for actual
firmware and then another time for an optional user overide on
EEPROM, 3826.eeprom. The custom EEPROM  is optional but if not
present we'll introduce an extra lag of 60 seconds with udev
present. Annotate we don't want udev nonsense here to avoid
the lag in case its not present.

This was found with the following SmPL patch.

@ firmware_not_critical @
expression cf;
expression config_file;
expression dev;
int ret;
identifier l;
statement S;
@@

-	ret = request_firmware(&cf, config_file, dev);
+	ret = request_firmware_direct(&cf, config_file, dev);
	if (ret < 0) {
		... when != goto l;
		    when != return ret;
		    when any
	} else {
		...
		release_firmware(cf);
		...
	}

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-By: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25 15:40:40 -04:00

722 lines
17 KiB
C

/*
* Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
* Copyright 2008 Johannes Berg <johannes@sipsolutions.net>
*
* This driver is a port from stlc45xx:
* Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include "p54spi.h"
#include "p54.h"
#include "lmac.h"
#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
#include "p54spi_eeprom.h"
#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
MODULE_FIRMWARE("3826.arm");
/* gpios should be handled in board files and provided via platform data,
* but because it's currently impossible for p54spi to have a header file
* in include/linux, let's use module paramaters for now
*/
static int p54spi_gpio_power = 97;
module_param(p54spi_gpio_power, int, 0444);
MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
static int p54spi_gpio_irq = 87;
module_param(p54spi_gpio_irq, int, 0444);
MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
void *buf, size_t len)
{
struct spi_transfer t[2];
struct spi_message m;
__le16 addr;
/* We first push the address */
addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = &addr;
t[0].len = sizeof(addr);
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
t[1].len = len;
spi_message_add_tail(&t[1], &m);
spi_sync(priv->spi, &m);
}
static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
const void *buf, size_t len)
{
struct spi_transfer t[3];
struct spi_message m;
__le16 addr;
/* We first push the address */
addr = cpu_to_le16(address << 8);
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = &addr;
t[0].len = sizeof(addr);
spi_message_add_tail(&t[0], &m);
t[1].tx_buf = buf;
t[1].len = len & ~1;
spi_message_add_tail(&t[1], &m);
if (len % 2) {
__le16 last_word;
last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
t[2].tx_buf = &last_word;
t[2].len = sizeof(last_word);
spi_message_add_tail(&t[2], &m);
}
spi_sync(priv->spi, &m);
}
static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
{
__le32 val;
p54spi_spi_read(priv, addr, &val, sizeof(val));
return le32_to_cpu(val);
}
static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
{
p54spi_spi_write(priv, addr, &val, sizeof(val));
}
static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
{
p54spi_spi_write(priv, addr, &val, sizeof(val));
}
static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
{
int i;
for (i = 0; i < 2000; i++) {
u32 buffer = p54spi_read32(priv, reg);
if ((buffer & bits) == bits)
return 1;
}
return 0;
}
static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
const void *buf, size_t len)
{
if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
dev_err(&priv->spi->dev, "spi_write_dma not allowed "
"to DMA write.\n");
return -EAGAIN;
}
p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
return 0;
}
static int p54spi_request_firmware(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
int ret;
/* FIXME: should driver use it's own struct device? */
ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
if (ret < 0) {
dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
return ret;
}
ret = p54_parse_firmware(dev, priv->firmware);
if (ret) {
release_firmware(priv->firmware);
return ret;
}
return 0;
}
static int p54spi_request_eeprom(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
const struct firmware *eeprom;
int ret;
/* allow users to customize their eeprom.
*/
ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev);
if (ret < 0) {
#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
dev_info(&priv->spi->dev, "loading default eeprom...\n");
ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
sizeof(p54spi_eeprom));
#else
dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
} else {
dev_info(&priv->spi->dev, "loading user eeprom...\n");
ret = p54_parse_eeprom(dev, (void *) eeprom->data,
(int)eeprom->size);
release_firmware(eeprom);
}
return ret;
}
static int p54spi_upload_firmware(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
unsigned long fw_len, _fw_len;
unsigned int offset = 0;
int err = 0;
u8 *fw;
fw_len = priv->firmware->size;
fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
if (!fw)
return -ENOMEM;
/* stop the device */
p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
SPI_CTRL_STAT_START_HALTED));
msleep(TARGET_BOOT_SLEEP);
p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
SPI_CTRL_STAT_HOST_OVERRIDE |
SPI_CTRL_STAT_START_HALTED));
msleep(TARGET_BOOT_SLEEP);
while (fw_len > 0) {
_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
err = p54spi_spi_write_dma(priv, cpu_to_le32(
ISL38XX_DEV_FIRMWARE_ADDR + offset),
(fw + offset), _fw_len);
if (err < 0)
goto out;
fw_len -= _fw_len;
offset += _fw_len;
}
BUG_ON(fw_len != 0);
/* enable host interrupts */
p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
cpu_to_le32(SPI_HOST_INTS_DEFAULT));
/* boot the device */
p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
SPI_CTRL_STAT_RAM_BOOT));
msleep(TARGET_BOOT_SLEEP);
p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
msleep(TARGET_BOOT_SLEEP);
out:
kfree(fw);
return err;
}
static void p54spi_power_off(struct p54s_priv *priv)
{
disable_irq(gpio_to_irq(p54spi_gpio_irq));
gpio_set_value(p54spi_gpio_power, 0);
}
static void p54spi_power_on(struct p54s_priv *priv)
{
gpio_set_value(p54spi_gpio_power, 1);
enable_irq(gpio_to_irq(p54spi_gpio_irq));
/* need to wait a while before device can be accessed, the length
* is just a guess
*/
msleep(10);
}
static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
{
p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
}
static int p54spi_wakeup(struct p54s_priv *priv)
{
/* wake the chip */
p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
cpu_to_le32(SPI_TARGET_INT_WAKEUP));
/* And wait for the READY interrupt */
if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
SPI_HOST_INT_READY)) {
dev_err(&priv->spi->dev, "INT_READY timeout\n");
return -EBUSY;
}
p54spi_int_ack(priv, SPI_HOST_INT_READY);
return 0;
}
static inline void p54spi_sleep(struct p54s_priv *priv)
{
p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
cpu_to_le32(SPI_TARGET_INT_SLEEP));
}
static void p54spi_int_ready(struct p54s_priv *priv)
{
p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
switch (priv->fw_state) {
case FW_STATE_BOOTING:
priv->fw_state = FW_STATE_READY;
complete(&priv->fw_comp);
break;
case FW_STATE_RESETTING:
priv->fw_state = FW_STATE_READY;
/* TODO: reinitialize state */
break;
default:
break;
}
}
static int p54spi_rx(struct p54s_priv *priv)
{
struct sk_buff *skb;
u16 len;
u16 rx_head[2];
#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
if (p54spi_wakeup(priv) < 0)
return -EBUSY;
/* Read data size and first data word in one SPI transaction
* This is workaround for firmware/DMA bug,
* when first data word gets lost under high load.
*/
p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
len = rx_head[0];
if (len == 0) {
p54spi_sleep(priv);
dev_err(&priv->spi->dev, "rx request of zero bytes\n");
return 0;
}
/* Firmware may insert up to 4 padding bytes after the lmac header,
* but it does not amend the size of SPI data transfer.
* Such packets has correct data size in header, thus referencing
* past the end of allocated skb. Reserve extra 4 bytes for this case
*/
skb = dev_alloc_skb(len + 4);
if (!skb) {
p54spi_sleep(priv);
dev_err(&priv->spi->dev, "could not alloc skb");
return -ENOMEM;
}
if (len <= READAHEAD_SZ) {
memcpy(skb_put(skb, len), rx_head + 1, len);
} else {
memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ);
p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
skb_put(skb, len - READAHEAD_SZ),
len - READAHEAD_SZ);
}
p54spi_sleep(priv);
/* Put additional bytes to compensate for the possible
* alignment-caused truncation
*/
skb_put(skb, 4);
if (p54_rx(priv->hw, skb) == 0)
dev_kfree_skb(skb);
return 0;
}
static irqreturn_t p54spi_interrupt(int irq, void *config)
{
struct spi_device *spi = config;
struct p54s_priv *priv = spi_get_drvdata(spi);
ieee80211_queue_work(priv->hw, &priv->work);
return IRQ_HANDLED;
}
static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
{
struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
int ret = 0;
if (p54spi_wakeup(priv) < 0)
return -EBUSY;
ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
if (ret < 0)
goto out;
if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
SPI_HOST_INT_WR_READY)) {
dev_err(&priv->spi->dev, "WR_READY timeout\n");
ret = -EAGAIN;
goto out;
}
p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
if (FREE_AFTER_TX(skb))
p54_free_skb(priv->hw, skb);
out:
p54spi_sleep(priv);
return ret;
}
static int p54spi_wq_tx(struct p54s_priv *priv)
{
struct p54s_tx_info *entry;
struct sk_buff *skb;
struct ieee80211_tx_info *info;
struct p54_tx_info *minfo;
struct p54s_tx_info *dinfo;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&priv->tx_lock, flags);
while (!list_empty(&priv->tx_pending)) {
entry = list_entry(priv->tx_pending.next,
struct p54s_tx_info, tx_list);
list_del_init(&entry->tx_list);
spin_unlock_irqrestore(&priv->tx_lock, flags);
dinfo = container_of((void *) entry, struct p54s_tx_info,
tx_list);
minfo = container_of((void *) dinfo, struct p54_tx_info,
data);
info = container_of((void *) minfo, struct ieee80211_tx_info,
rate_driver_data);
skb = container_of((void *) info, struct sk_buff, cb);
ret = p54spi_tx_frame(priv, skb);
if (ret < 0) {
p54_free_skb(priv->hw, skb);
return ret;
}
spin_lock_irqsave(&priv->tx_lock, flags);
}
spin_unlock_irqrestore(&priv->tx_lock, flags);
return ret;
}
static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct p54s_priv *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
unsigned long flags;
BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
spin_lock_irqsave(&priv->tx_lock, flags);
list_add_tail(&di->tx_list, &priv->tx_pending);
spin_unlock_irqrestore(&priv->tx_lock, flags);
ieee80211_queue_work(priv->hw, &priv->work);
}
static void p54spi_work(struct work_struct *work)
{
struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
u32 ints;
int ret;
mutex_lock(&priv->mutex);
if (priv->fw_state == FW_STATE_OFF)
goto out;
ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
if (ints & SPI_HOST_INT_READY) {
p54spi_int_ready(priv);
p54spi_int_ack(priv, SPI_HOST_INT_READY);
}
if (priv->fw_state != FW_STATE_READY)
goto out;
if (ints & SPI_HOST_INT_UPDATE) {
p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
ret = p54spi_rx(priv);
if (ret < 0)
goto out;
}
if (ints & SPI_HOST_INT_SW_UPDATE) {
p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
ret = p54spi_rx(priv);
if (ret < 0)
goto out;
}
ret = p54spi_wq_tx(priv);
out:
mutex_unlock(&priv->mutex);
}
static int p54spi_op_start(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
unsigned long timeout;
int ret = 0;
if (mutex_lock_interruptible(&priv->mutex)) {
ret = -EINTR;
goto out;
}
priv->fw_state = FW_STATE_BOOTING;
p54spi_power_on(priv);
ret = p54spi_upload_firmware(dev);
if (ret < 0) {
p54spi_power_off(priv);
goto out_unlock;
}
mutex_unlock(&priv->mutex);
timeout = msecs_to_jiffies(2000);
timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
timeout);
if (!timeout) {
dev_err(&priv->spi->dev, "firmware boot failed");
p54spi_power_off(priv);
ret = -1;
goto out;
}
if (mutex_lock_interruptible(&priv->mutex)) {
ret = -EINTR;
p54spi_power_off(priv);
goto out;
}
WARN_ON(priv->fw_state != FW_STATE_READY);
out_unlock:
mutex_unlock(&priv->mutex);
out:
return ret;
}
static void p54spi_op_stop(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
unsigned long flags;
mutex_lock(&priv->mutex);
WARN_ON(priv->fw_state != FW_STATE_READY);
p54spi_power_off(priv);
spin_lock_irqsave(&priv->tx_lock, flags);
INIT_LIST_HEAD(&priv->tx_pending);
spin_unlock_irqrestore(&priv->tx_lock, flags);
priv->fw_state = FW_STATE_OFF;
mutex_unlock(&priv->mutex);
cancel_work_sync(&priv->work);
}
static int p54spi_probe(struct spi_device *spi)
{
struct p54s_priv *priv = NULL;
struct ieee80211_hw *hw;
int ret = -EINVAL;
hw = p54_init_common(sizeof(*priv));
if (!hw) {
dev_err(&spi->dev, "could not alloc ieee80211_hw");
return -ENOMEM;
}
priv = hw->priv;
priv->hw = hw;
spi_set_drvdata(spi, priv);
priv->spi = spi;
spi->bits_per_word = 16;
spi->max_speed_hz = 24000000;
ret = spi_setup(spi);
if (ret < 0) {
dev_err(&priv->spi->dev, "spi_setup failed");
goto err_free;
}
ret = gpio_request(p54spi_gpio_power, "p54spi power");
if (ret < 0) {
dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
goto err_free;
}
ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
if (ret < 0) {
dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
goto err_free_gpio_power;
}
gpio_direction_output(p54spi_gpio_power, 0);
gpio_direction_input(p54spi_gpio_irq);
ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
p54spi_interrupt, 0, "p54spi",
priv->spi);
if (ret < 0) {
dev_err(&priv->spi->dev, "request_irq() failed");
goto err_free_gpio_irq;
}
irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
disable_irq(gpio_to_irq(p54spi_gpio_irq));
INIT_WORK(&priv->work, p54spi_work);
init_completion(&priv->fw_comp);
INIT_LIST_HEAD(&priv->tx_pending);
mutex_init(&priv->mutex);
spin_lock_init(&priv->tx_lock);
SET_IEEE80211_DEV(hw, &spi->dev);
priv->common.open = p54spi_op_start;
priv->common.stop = p54spi_op_stop;
priv->common.tx = p54spi_op_tx;
ret = p54spi_request_firmware(hw);
if (ret < 0)
goto err_free_common;
ret = p54spi_request_eeprom(hw);
if (ret)
goto err_free_common;
ret = p54_register_common(hw, &priv->spi->dev);
if (ret)
goto err_free_common;
return 0;
err_free_common:
free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
err_free_gpio_irq:
gpio_free(p54spi_gpio_irq);
err_free_gpio_power:
gpio_free(p54spi_gpio_power);
err_free:
p54_free_common(priv->hw);
return ret;
}
static int p54spi_remove(struct spi_device *spi)
{
struct p54s_priv *priv = spi_get_drvdata(spi);
p54_unregister_common(priv->hw);
free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
gpio_free(p54spi_gpio_power);
gpio_free(p54spi_gpio_irq);
release_firmware(priv->firmware);
mutex_destroy(&priv->mutex);
p54_free_common(priv->hw);
return 0;
}
static struct spi_driver p54spi_driver = {
.driver = {
.name = "p54spi",
.owner = THIS_MODULE,
},
.probe = p54spi_probe,
.remove = p54spi_remove,
};
module_spi_driver(p54spi_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
MODULE_ALIAS("spi:cx3110x");
MODULE_ALIAS("spi:p54spi");
MODULE_ALIAS("spi:stlc45xx");