mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 22:45:21 +07:00
99f2b13037
The SMAP register offsets in the versatile PCI controller code were all off by four. (This didn't have any observable bad effects because on this board PHYS_OFFSET is zero, and (a) writing zero to the flags register at offset 0x10 has no effect and (b) the reset value of the SMAP register is zero anyway, so failing to write SMAP2 didn't matter.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
369 lines
9.1 KiB
C
369 lines
9.1 KiB
C
/*
|
|
* linux/arch/arm/mach-versatile/pci.c
|
|
*
|
|
* (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
|
|
* You can redistribute and/or modify this software under the terms of version 2
|
|
* of the GNU General Public License as published by the Free Software Foundation.
|
|
* THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
|
|
* WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
* Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
|
|
*
|
|
* ARM Versatile PCI driver.
|
|
*
|
|
* 14/04/2005 Initial version, colin.king@philips.com
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/pci.h>
|
|
|
|
/*
|
|
* these spaces are mapped using the following base registers:
|
|
*
|
|
* Usage Local Bus Memory Base/Map registers used
|
|
*
|
|
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch
|
|
* Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch
|
|
* IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO
|
|
* Cfg 42000000 - 42FFFFFF PCI config
|
|
*
|
|
*/
|
|
#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
|
|
#define SYS_PCICTL __IO_ADDRESS(VERSATILE_SYS_PCICTL)
|
|
#define PCI_IMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
|
|
#define PCI_IMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
|
|
#define PCI_IMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
|
|
#define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
|
|
#define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
|
|
#define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
|
|
#define PCI_SELFID __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
|
|
|
|
#define DEVICE_ID_OFFSET 0x00
|
|
#define CSR_OFFSET 0x04
|
|
#define CLASS_ID_OFFSET 0x08
|
|
|
|
#define VP_PCI_DEVICE_ID 0x030010ee
|
|
#define VP_PCI_CLASS_ID 0x0b400000
|
|
|
|
static unsigned long pci_slot_ignore = 0;
|
|
|
|
static int __init versatile_pci_slot_ignore(char *str)
|
|
{
|
|
int retval;
|
|
int slot;
|
|
|
|
while ((retval = get_option(&str,&slot))) {
|
|
if ((slot < 0) || (slot > 31)) {
|
|
printk("Illegal slot value: %d\n",slot);
|
|
} else {
|
|
pci_slot_ignore |= (1 << slot);
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("pci_slot_ignore=", versatile_pci_slot_ignore);
|
|
|
|
|
|
static void __iomem *__pci_addr(struct pci_bus *bus,
|
|
unsigned int devfn, int offset)
|
|
{
|
|
unsigned int busnr = bus->number;
|
|
|
|
/*
|
|
* Trap out illegal values
|
|
*/
|
|
if (offset > 255)
|
|
BUG();
|
|
if (busnr > 255)
|
|
BUG();
|
|
if (devfn > 255)
|
|
BUG();
|
|
|
|
return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
|
|
(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
|
|
}
|
|
|
|
static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
|
|
u32 v;
|
|
int slot = PCI_SLOT(devfn);
|
|
|
|
if (pci_slot_ignore & (1 << slot)) {
|
|
/* Ignore this slot */
|
|
switch (size) {
|
|
case 1:
|
|
v = 0xff;
|
|
break;
|
|
case 2:
|
|
v = 0xffff;
|
|
break;
|
|
default:
|
|
v = 0xffffffff;
|
|
}
|
|
} else {
|
|
switch (size) {
|
|
case 1:
|
|
v = __raw_readl(addr);
|
|
if (where & 2) v >>= 16;
|
|
if (where & 1) v >>= 8;
|
|
v &= 0xff;
|
|
break;
|
|
|
|
case 2:
|
|
v = __raw_readl(addr);
|
|
if (where & 2) v >>= 16;
|
|
v &= 0xffff;
|
|
break;
|
|
|
|
default:
|
|
v = __raw_readl(addr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
*val = v;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 val)
|
|
{
|
|
void __iomem *addr = __pci_addr(bus, devfn, where);
|
|
int slot = PCI_SLOT(devfn);
|
|
|
|
if (pci_slot_ignore & (1 << slot)) {
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
switch (size) {
|
|
case 1:
|
|
__raw_writeb((u8)val, addr);
|
|
break;
|
|
|
|
case 2:
|
|
__raw_writew((u16)val, addr);
|
|
break;
|
|
|
|
case 4:
|
|
__raw_writel(val, addr);
|
|
break;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops pci_versatile_ops = {
|
|
.read = versatile_read_config,
|
|
.write = versatile_write_config,
|
|
};
|
|
|
|
static struct resource unused_mem = {
|
|
.name = "PCI unused",
|
|
.start = VERSATILE_PCI_MEM_BASE0,
|
|
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct resource non_mem = {
|
|
.name = "PCI non-prefetchable",
|
|
.start = VERSATILE_PCI_MEM_BASE1,
|
|
.end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct resource pre_mem = {
|
|
.name = "PCI prefetchable",
|
|
.start = VERSATILE_PCI_MEM_BASE2,
|
|
.end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
|
|
};
|
|
|
|
static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = request_resource(&iomem_resource, &unused_mem);
|
|
if (ret) {
|
|
printk(KERN_ERR "PCI: unable to allocate unused "
|
|
"memory region (%d)\n", ret);
|
|
goto out;
|
|
}
|
|
ret = request_resource(&iomem_resource, &non_mem);
|
|
if (ret) {
|
|
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
|
|
"memory region (%d)\n", ret);
|
|
goto release_unused_mem;
|
|
}
|
|
ret = request_resource(&iomem_resource, &pre_mem);
|
|
if (ret) {
|
|
printk(KERN_ERR "PCI: unable to allocate prefetchable "
|
|
"memory region (%d)\n", ret);
|
|
goto release_non_mem;
|
|
}
|
|
|
|
/*
|
|
* the mem resource for this bus
|
|
* the prefetch mem resource for this bus
|
|
*/
|
|
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
|
|
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
|
|
|
|
goto out;
|
|
|
|
release_non_mem:
|
|
release_resource(&non_mem);
|
|
release_unused_mem:
|
|
release_resource(&unused_mem);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
|
|
{
|
|
int ret = 0;
|
|
int i;
|
|
int myslot = -1;
|
|
unsigned long val;
|
|
void __iomem *local_pci_cfg_base;
|
|
|
|
val = __raw_readl(SYS_PCICTL);
|
|
if (!(val & 1)) {
|
|
printk("Not plugged into PCI backplane!\n");
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (nr == 0) {
|
|
ret = pci_versatile_setup_resources(sys);
|
|
if (ret < 0) {
|
|
printk("pci_versatile_setup: resources... oops?\n");
|
|
goto out;
|
|
}
|
|
} else {
|
|
printk("pci_versatile_setup: resources... nr == 0??\n");
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* We need to discover the PCI core first to configure itself
|
|
* before the main PCI probing is performed
|
|
*/
|
|
for (i=0; i<32; i++)
|
|
if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
|
|
(__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
|
|
myslot = i;
|
|
break;
|
|
}
|
|
|
|
if (myslot == -1) {
|
|
printk("Cannot find PCI core!\n");
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
printk("PCI core found (slot %d)\n",myslot);
|
|
|
|
__raw_writel(myslot, PCI_SELFID);
|
|
local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
|
|
|
|
val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
|
|
val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
|
|
__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
|
|
|
|
/*
|
|
* Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
|
|
*/
|
|
__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
|
|
__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
|
|
__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
|
|
|
|
/*
|
|
* For many years the kernel and QEMU were symbiotically buggy
|
|
* in that they both assumed the same broken IRQ mapping.
|
|
* QEMU therefore attempts to auto-detect old broken kernels
|
|
* so that they still work on newer QEMU as they did on old
|
|
* QEMU. Since we now use the correct (ie matching-hardware)
|
|
* IRQ mapping we write a definitely different value to a
|
|
* PCI_INTERRUPT_LINE register to tell QEMU that we expect
|
|
* real hardware behaviour and it need not be backwards
|
|
* compatible for us. This write is harmless on real hardware.
|
|
*/
|
|
__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
|
|
|
|
/*
|
|
* Do not to map Versatile FPGA PCI device into memory space
|
|
*/
|
|
pci_slot_ignore |= (1 << myslot);
|
|
ret = 1;
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
|
|
void __init pci_versatile_preinit(void)
|
|
{
|
|
pcibios_min_mem = 0x50000000;
|
|
|
|
__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
|
|
__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
|
|
__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
|
|
|
|
__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
|
|
__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
|
|
__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
|
|
|
|
__raw_writel(1, SYS_PCICTL);
|
|
}
|
|
|
|
/*
|
|
* map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this.
|
|
*/
|
|
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Slot INTA INTB INTC INTD
|
|
* 31 PCI1 PCI2 PCI3 PCI0
|
|
* 30 PCI0 PCI1 PCI2 PCI3
|
|
* 29 PCI3 PCI0 PCI1 PCI2
|
|
*/
|
|
irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
|
|
|
|
return irq;
|
|
}
|
|
|
|
static struct hw_pci versatile_pci __initdata = {
|
|
.map_irq = versatile_map_irq,
|
|
.nr_controllers = 1,
|
|
.ops = &pci_versatile_ops,
|
|
.setup = pci_versatile_setup,
|
|
.preinit = pci_versatile_preinit,
|
|
};
|
|
|
|
static int __init versatile_pci_init(void)
|
|
{
|
|
pci_common_init(&versatile_pci);
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(versatile_pci_init);
|