linux_dsm_epyc7002/arch/arc/mm/init.c
Vineet Gupta e497c8e52a ARCv2: IOC: Use actual memory size to setup aperture size
vs. fixed 512M before.

But this still assumes that all of memory is under IOC which may not be
true for the SoC. Improve that later when this becomes a real issue, by
specifying this from DT.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18 14:52:43 -08:00

239 lines
6.1 KiB
C

/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
#endif
#include <linux/of_fdt.h>
#include <linux/swap.h>
#include <linux/module.h>
#include <linux/highmem.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
EXPORT_SYMBOL(empty_zero_page);
static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
#ifdef CONFIG_DISCONTIGMEM
struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
#endif
long __init arc_get_mem_sz(void)
{
return low_mem_sz;
}
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
low_mem_sz = memparse(str, NULL) & PAGE_MASK;
/* early console might not be setup yet - it will show up later */
pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
return 0;
}
early_param("mem", setup_mem_sz);
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
int in_use = 0;
if (!low_mem_sz) {
if (base != low_mem_start)
panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
low_mem_sz = size;
in_use = 1;
} else {
#ifdef CONFIG_HIGHMEM
high_mem_start = base;
high_mem_sz = size;
in_use = 1;
#endif
}
pr_info("Memory @ %llx [%lldM] %s\n",
base, TO_MB(size), !in_use ? "Not used":"");
}
#ifdef CONFIG_BLK_DEV_INITRD
static int __init early_initrd(char *p)
{
unsigned long start, size;
char *endp;
start = memparse(p, &endp);
if (*endp == ',') {
size = memparse(endp + 1, NULL);
initrd_start = (unsigned long)__va(start);
initrd_end = (unsigned long)__va(start + size);
}
return 0;
}
early_param("initrd", early_initrd);
#endif
/*
* First memory setup routine called from setup_arch()
* 1. setup swapper's mm @init_mm
* 2. Count the pages we have and setup bootmem allocator
* 3. zone setup
*/
void __init setup_arch_memory(void)
{
unsigned long zones_size[MAX_NR_ZONES];
unsigned long zones_holes[MAX_NR_ZONES];
init_mm.start_code = (unsigned long)_text;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)_end;
/* first page of system - kernel .vector starts here */
min_low_pfn = ARCH_PFN_OFFSET;
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
#ifdef CONFIG_FLATMEM
/* pfn_valid() uses this */
max_mapnr = max_low_pfn - min_low_pfn;
#endif
/*------------- bootmem allocator setup -----------------------*/
/*
* seed the bootmem allocator after any DT memory node parsing or
* "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
*
* Only low mem is added, otherwise we have crashes when allocating
* mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
* avail memory, ending in highmem with a > 32-bit address. However
* it then tries to memset it with a truncaed 32-bit handle, causing
* the crash
*/
memblock_add_node(low_mem_start, low_mem_sz, 0);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
memblock_dump_all();
/*----------------- node/zones setup --------------------------*/
memset(zones_size, 0, sizeof(zones_size));
memset(zones_holes, 0, sizeof(zones_holes));
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
/*
* We can't use the helper free_area_init(zones[]) because it uses
* PAGE_OFFSET to compute the @min_low_pfn which would be wrong
* when our kernel doesn't start at PAGE_OFFSET, i.e.
* PAGE_OFFSET != CONFIG_LINUX_LINK_BASE
*/
free_area_init_node(0, /* node-id */
zones_size, /* num pages per zone */
min_low_pfn, /* first pfn of node */
zones_holes); /* holes */
#ifdef CONFIG_HIGHMEM
/*
* Populate a new node with highmem
*
* On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
* than addresses in normal ala low memory (0x8000_0000 based).
* Even with PAE, the huge peripheral space hole would waste a lot of
* mem with single mem_map[]. This warrants a mem_map per region design.
* Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
*
* DISCONTIGMEM in turns requires multiple nodes. node 0 above is
* populated with normal memory zone while node 1 only has highmem
*/
node_set_online(1);
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
zones_size[ZONE_NORMAL] = 0;
zones_holes[ZONE_NORMAL] = 0;
zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
zones_holes[ZONE_HIGHMEM] = 0;
free_area_init_node(1, /* node-id */
zones_size, /* num pages per zone */
min_high_pfn, /* first pfn of node */
zones_holes); /* holes */
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
}
/*
* mem_init - initializes memory
*
* Frees up bootmem
* Calculates and displays memory available/used
*/
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
free_all_bootmem();
mem_init_print_info(NULL);
}
/*
* free_initmem: Free all the __init memory.
*/
void __ref free_initmem(void)
{
free_initmem_default(-1);
}
#ifdef CONFIG_BLK_DEV_INITRD
void __init free_initrd_mem(unsigned long start, unsigned long end)
{
free_reserved_area((void *)start, (void *)end, -1, "initrd");
}
#endif