linux_dsm_epyc7002/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

56 lines
1.3 KiB
Plaintext

Samsung/Meritech SMDK2440
=========================
Introduction
------------
The SMDK2440 is a two part evaluation board for the Samsung S3C2440
processor. It includes support for LCD, SmartMedia, Audio, SD and
10MBit Ethernet, and expansion headers for various signals, including
the camera and unused GPIO.
Configuration
-------------
To set the default configuration, use `make smdk2440_defconfig` which
will configure the common features of this board, or use
`make s3c2410_config` to include support for all s3c2410/s3c2440 machines
Support
-------
Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
includes linux based USB download tools.
Some of the h1940 patches that can be found from the H1940 project
site at http://www.handhelds.org/projects/h1940.html can also be
applied to this board.
Peripherals
-----------
There is no current support for any of the extra peripherals on the
base-board itself.
MTD
---
The NAND flash should be supported by the in kernel MTD NAND support,
NOR flash will be added later.
Maintainers
-----------
This board is being maintained by Ben Dooks, for more info, see
http://www.fluff.org/ben/smdk2440/
Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
and to Simtec Electronics for allowing me time to work on this.
(c) 2004 Ben Dooks