Daniel Pieczko c577e59ed7 sfc: fully reset if MC_REBOOT event received without warm_boot_count increment ... On EF10, MC_CMD_VPORT_RECONFIGURE can cause a CODE_MC_REBOOT event to be sent to a function without incrementing the (adapter-wide) warm_boot_count. In this case, the reboot is not detected by the loop on efx_mcdi_poll_reboot(), so prepare for recovery from an MC reboot anyway. When this codepath is run, the MC has always just rebooted, so this recovery is valid. The loop on efx_mcdi_poll_reboot() is still required for other MC reboot cases, so that actions in response to an MC reboot are performed, such as clearing locally calculated statistics. Siena NICs are unaffected by this change as the above scenario does not apply. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2015-10-12 05:35:25 -07:00
..
bitfield.h
ef10_regs.h	sfc: Remove unused definitions of EF10 user-mode DMA descriptors	2014-02-12 17:53:34 -05:00
ef10_sriov.c	sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()	2015-07-08 16:18:52 -07:00
ef10_sriov.h	sfc: add legacy method for changing a PF's MAC address	2015-07-08 16:07:33 -07:00
ef10.c	sfc: fully reset if MC_REBOOT event received without warm_boot_count increment	2015-10-12 05:35:25 -07:00
efx.c	sfc: Allow driver to cope with a lower number of VIs than it needs for RSS	2015-08-28 13:53:47 -07:00
efx.h	sfc: Allow driver to cope with a lower number of VIs than it needs for RSS	2015-08-28 13:53:47 -07:00
enum.h	sfc: Change entity reset on MC reboot to a new datapath-only reset.	2015-05-21 18:43:54 -04:00
ethtool.c	sfc: protect filter table against use-after-free	2015-05-21 18:43:53 -04:00
falcon_boards.c
falcon.c	sfc: Allow driver to cope with a lower number of VIs than it needs for RSS	2015-08-28 13:53:47 -07:00
farch_regs.h
farch.c	sfc: Own header for nic-specific sriov functions, single instance of netdev_ops and sriov removed from Falcon code	2015-05-09 16:16:46 -04:00
filter.h	sfc: Use ether_addr_copy and eth_broadcast_addr	2014-03-10 13:53:37 -04:00
io.h	sfc: PIO:Restrict to 64bit arch and use 64-bit writes.	2014-06-11 15:36:21 -07:00
Kconfig	sfc: add sysfs entry to control MCDI tracing	2015-05-27 13:54:51 -04:00
Makefile	sfc: Enable VF's via a write to the sysfs file sriov_numvfs	2015-05-09 16:16:46 -04:00
mcdi_mon.c	sfc: Add new sensor names	2013-12-12 22:06:54 +00:00
mcdi_pcol.h	sfc: update MCDI protocol definitions	2015-07-21 22:21:31 -07:00
mcdi_port.c	sfc: suppress ENOENT error messages from MC_CMD_MAC_STATS	2015-06-02 12:57:29 -07:00
mcdi.c	sfc: fully reset if MC_REBOOT event received without warm_boot_count increment	2015-10-12 05:35:25 -07:00
mcdi.h	sfc: add output flag decoding to efx_mcdi_set_workaround	2015-07-21 22:21:32 -07:00
mdio_10g.c
mdio_10g.h	sfc: Remove extern from function prototypes	2013-09-24 12:52:53 -07:00
mtd.c
net_driver.h	sfc: fully reset if MC_REBOOT event received without warm_boot_count increment	2015-10-12 05:35:25 -07:00
nic.c	sfc: fix calling of free_irq with already free vector	2014-05-12 14:56:45 -04:00
nic.h	sfc: enable cascaded multicast filters in MCFW	2015-07-21 22:21:31 -07:00
phy.h	sfc: Remove extern from function prototypes	2013-09-24 12:52:53 -07:00
ptp.c	sfc: Initialise MCDI buffers to 0 on declaration.	2015-05-21 18:43:53 -04:00
qt202x_phy.c
rx.c	sfc: free multiple Rx buffers when required	2015-05-31 17:36:20 -07:00
selftest.c	sfc: allow ethtool selftest and MC reboot to complete on an unprivileged function	2015-07-31 15:32:05 -07:00
selftest.h	sfc: Add MC BISTs to ethtool offline self test on EF10	2013-12-12 22:05:48 +00:00
siena_sriov.c	sfc: save old MAC address in case sriov_mac_address_changed fails	2015-05-21 18:43:53 -04:00
siena_sriov.h	sfc: save old MAC address in case sriov_mac_address_changed fails	2015-05-21 18:43:53 -04:00
siena.c	sfc: Allow driver to cope with a lower number of VIs than it needs for RSS	2015-08-28 13:53:47 -07:00
sriov.c	sfc: Implement ndo_gets_phys_port_id() for EF10 VFs	2015-06-02 12:57:26 -07:00
sriov.h	sfc: Implement ndo_gets_phys_port_id() for EF10 VFs	2015-06-02 12:57:26 -07:00
tenxpress.c
tx.c	sfc: Report TX completions to BQL after all TX events in interrupt	2015-07-09 00:00:40 -07:00
txc43128_phy.c
vfdi.h	ethernet: codespell comment spelling fixes	2015-03-08 22:54:22 -04:00
workarounds.h