mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 02:01:05 +07:00
92aed5d6ba
Remove fw_cfg hardware interface details from Documentation/devicetree/bindings/arm/fw-cfg.txt, and replace them with a pointer to the authoritative documentation in the QEMU source tree. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Cc: Laszlo Ersek <lersek@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
39 lines
1.1 KiB
Plaintext
39 lines
1.1 KiB
Plaintext
* QEMU Firmware Configuration bindings for ARM
|
|
|
|
QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
|
|
provide the following Firmware Configuration interface on the "virt" machine
|
|
type:
|
|
|
|
- A write-only, 16-bit wide selector (or control) register,
|
|
- a read-write, 64-bit wide data register.
|
|
|
|
QEMU exposes the control and data register to ARM guests as memory mapped
|
|
registers; their location is communicated to the guest's UEFI firmware in the
|
|
DTB that QEMU places at the bottom of the guest's DRAM.
|
|
|
|
The authoritative guest-side hardware interface documentation to the fw_cfg
|
|
device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
|
|
|
|
|
|
Required properties:
|
|
|
|
- compatible: "qemu,fw-cfg-mmio".
|
|
|
|
- reg: the MMIO region used by the device.
|
|
* Bytes 0x0 to 0x7 cover the data register.
|
|
* Bytes 0x8 to 0x9 cover the selector register.
|
|
* Further registers may be appended to the region in case of future interface
|
|
revisions / feature bits.
|
|
|
|
Example:
|
|
|
|
/ {
|
|
#size-cells = <0x2>;
|
|
#address-cells = <0x2>;
|
|
|
|
fw-cfg@9020000 {
|
|
compatible = "qemu,fw-cfg-mmio";
|
|
reg = <0x0 0x9020000 0x0 0xa>;
|
|
};
|
|
};
|