mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
67e7607fcd
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
166 lines
3.2 KiB
Plaintext
166 lines
3.2 KiB
Plaintext
/*
|
|
* Copyright (c) 2017 Carlo Caione
|
|
* Copyright (c) 2016 BayLibre, Inc.
|
|
* Author: Neil Armstrong <narmstrong@kernel.org>
|
|
*
|
|
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "meson-gxl-s905x.dtsi"
|
|
|
|
/ {
|
|
compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
|
|
model = "Hwacom AmazeTV (S905X)";
|
|
|
|
aliases {
|
|
serial0 = &uart_AO;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>;
|
|
};
|
|
|
|
vddio_card: gpio-regulator {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-name = "VDDIO_CARD";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
|
|
gpios-states = <1>;
|
|
|
|
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
|
|
states = <1800000 0
|
|
3300000 1>;
|
|
};
|
|
|
|
vddio_boot: regulator-vddio_boot {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDIO_BOOT";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vddao_3v3: regulator-vddao_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDAO_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc_3v3: regulator-vcc_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi32k: wifi32k {
|
|
compatible = "pwm-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
|
clocks = <&wifi32k>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
|
|
cvbs-connector {
|
|
compatible = "composite-video-connector";
|
|
|
|
port {
|
|
cvbs_connector_in: endpoint {
|
|
remote-endpoint = <&cvbs_vdac_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cvbs_vdac_port {
|
|
cvbs_vdac_out: endpoint {
|
|
remote-endpoint = <&cvbs_connector_in>;
|
|
};
|
|
};
|
|
|
|
ðmac {
|
|
status = "okay";
|
|
phy-mode = "rmii";
|
|
phy-handle = <&internal_phy>;
|
|
};
|
|
|
|
&ir {
|
|
status = "okay";
|
|
pinctrl-0 = <&remote_input_ao_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&pwm_ef {
|
|
status = "okay";
|
|
pinctrl-0 = <&pwm_e_pins>;
|
|
pinctrl-names = "default";
|
|
clocks = <&clkc CLKID_FCLK_DIV4>;
|
|
clock-names = "clkin0";
|
|
};
|
|
|
|
/* SD card */
|
|
&sd_emmc_b {
|
|
status = "okay";
|
|
pinctrl-0 = <&sdcard_pins>;
|
|
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
max-frequency = <100000000>;
|
|
disable-wp;
|
|
|
|
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
|
|
cd-inverted;
|
|
|
|
vmmc-supply = <&vddao_3v3>;
|
|
vqmmc-supply = <&vddio_card>;
|
|
};
|
|
|
|
/* eMMC */
|
|
&sd_emmc_c {
|
|
status = "okay";
|
|
pinctrl-0 = <&emmc_pins>;
|
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <100000000>;
|
|
non-removable;
|
|
disable-wp;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vddio_boot>;
|
|
};
|
|
|
|
&uart_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|