mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 10:56:11 +07:00
bc1099d2b2
This adds support for an optional device-tree property that makes the driver skip all the delays around clocking the GPIOs and set it in the device-tree of common POWER9 based OpenPower platforms. This useful on chips like the AST2500 where the GPIO block is running at a fairly low clock frequency (25Mhz typically). In this case, the delays are unnecessary and due to the low precision of the timers, actually quite harmful in terms of performance. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Tested-by: Joel Stanley <joel@jms.id.au>
586 lines
8.8 KiB
Plaintext
586 lines
8.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/dts-v1/;
|
|
#include "aspeed-g5.dtsi"
|
|
#include <dt-bindings/gpio/aspeed-gpio.h>
|
|
#include <dt-bindings/leds/leds-pca955x.h>
|
|
|
|
/ {
|
|
model = "Witherspoon BMC";
|
|
compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
|
|
|
|
chosen {
|
|
stdout-path = &uart5;
|
|
bootargs = "console=ttyS4,115200 earlyprintk";
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
flash_memory: region@98000000 {
|
|
no-map;
|
|
reg = <0x98000000 0x04000000>; /* 64M */
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
air-water {
|
|
label = "air-water";
|
|
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
|
|
linux,code = <ASPEED_GPIO(B, 5)>;
|
|
};
|
|
|
|
checkstop {
|
|
label = "checkstop";
|
|
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
|
|
linux,code = <ASPEED_GPIO(J, 2)>;
|
|
};
|
|
|
|
ps0-presence {
|
|
label = "ps0-presence";
|
|
gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
|
|
linux,code = <ASPEED_GPIO(P, 7)>;
|
|
};
|
|
|
|
ps1-presence {
|
|
label = "ps1-presence";
|
|
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
|
|
linux,code = <ASPEED_GPIO(N, 0)>;
|
|
};
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <1000>;
|
|
|
|
fan0-presence {
|
|
label = "fan0-presence";
|
|
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
|
|
linux,code = <4>;
|
|
};
|
|
|
|
fan1-presence {
|
|
label = "fan1-presence";
|
|
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
|
|
linux,code = <5>;
|
|
};
|
|
|
|
fan2-presence {
|
|
label = "fan2-presence";
|
|
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <6>;
|
|
};
|
|
|
|
fan3-presence {
|
|
label = "fan3-presence";
|
|
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <7>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
fan0 {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
fan1 {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
fan2 {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
fan3 {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
front-fault {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
front-power {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
front-id {
|
|
retain-state-shutdown;
|
|
default-state = "keep";
|
|
gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rear-fault {
|
|
gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rear-id {
|
|
gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rear-power {
|
|
gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
power-button {
|
|
gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
fsi: gpio-fsi {
|
|
compatible = "fsi-master-gpio", "fsi-master";
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
no-gpio-delays;
|
|
|
|
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
|
|
data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
|
|
mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
|
|
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
|
|
trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
iio-hwmon-dps310 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&dps 0>;
|
|
};
|
|
|
|
iio-hwmon-bmp280 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&bmp 1>;
|
|
};
|
|
|
|
};
|
|
|
|
&fmc {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
status = "okay";
|
|
label = "bmc";
|
|
m25p,fast-read;
|
|
#include "openbmc-flash-layout.dtsi"
|
|
};
|
|
|
|
flash@1 {
|
|
status = "okay";
|
|
label = "alt";
|
|
m25p,fast-read;
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1_default>;
|
|
|
|
flash@0 {
|
|
status = "okay";
|
|
label = "pnor";
|
|
m25p,fast-read;
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
/* Rear RS-232 connector */
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_txd1_default
|
|
&pinctrl_rxd1_default
|
|
&pinctrl_nrts1_default
|
|
&pinctrl_ndtr1_default
|
|
&pinctrl_ndsr1_default
|
|
&pinctrl_ncts1_default
|
|
&pinctrl_ndcd1_default
|
|
&pinctrl_nri1_default>;
|
|
};
|
|
|
|
&uart2 {
|
|
/* APSS */
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
|
|
};
|
|
|
|
&uart5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&lpc_ctrl {
|
|
status = "okay";
|
|
memory-region = <&flash_memory>;
|
|
flash = <&spi1>;
|
|
};
|
|
|
|
&mac0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rmii1_default>;
|
|
use-ncsi;
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
/* MUX ->
|
|
* Samtec 1
|
|
* Samtec 2
|
|
*/
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
bmp: bmp280@77 {
|
|
compatible = "bosch,bmp280";
|
|
reg = <0x77>;
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
max31785@52 {
|
|
compatible = "maxim,max31785a";
|
|
reg = <0x52>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
dps: dps310@76 {
|
|
compatible = "infineon,dps310";
|
|
reg = <0x76>;
|
|
#io-channel-cells = <0>;
|
|
};
|
|
|
|
pca0: pca9552@60 {
|
|
compatible = "nxp,pca9552";
|
|
reg = <0x60>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
gpio@0 {
|
|
reg = <0>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@1 {
|
|
reg = <1>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@2 {
|
|
reg = <2>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@3 {
|
|
reg = <3>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@4 {
|
|
reg = <4>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@5 {
|
|
reg = <5>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@6 {
|
|
reg = <6>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@7 {
|
|
reg = <7>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@8 {
|
|
reg = <8>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@9 {
|
|
reg = <9>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@10 {
|
|
reg = <10>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@11 {
|
|
reg = <11>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@12 {
|
|
reg = <12>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@13 {
|
|
reg = <13>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@14 {
|
|
reg = <14>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@15 {
|
|
reg = <15>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
};
|
|
|
|
power-supply@68 {
|
|
compatible = "ibm,cffps1";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
power-supply@69 {
|
|
compatible = "ibm,cffps1";
|
|
reg = <0x69>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
tmp423a@4c {
|
|
compatible = "ti,tmp423";
|
|
reg = <0x4c>;
|
|
};
|
|
|
|
ir35221@70 {
|
|
compatible = "infineon,ir35221";
|
|
reg = <0x70>;
|
|
};
|
|
|
|
ir35221@71 {
|
|
compatible = "infineon,ir35221";
|
|
reg = <0x71>;
|
|
};
|
|
};
|
|
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
|
|
tmp423a@4c {
|
|
compatible = "ti,tmp423";
|
|
reg = <0x4c>;
|
|
};
|
|
|
|
ir35221@70 {
|
|
compatible = "infineon,ir35221";
|
|
reg = <0x70>;
|
|
};
|
|
|
|
ir35221@71 {
|
|
compatible = "infineon,ir35221";
|
|
reg = <0x71>;
|
|
};
|
|
};
|
|
|
|
&i2c9 {
|
|
status = "okay";
|
|
|
|
tmp275@4a {
|
|
compatible = "ti,tmp275";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
|
|
&i2c10 {
|
|
/* MUX
|
|
* -> PCIe Slot 3
|
|
* -> PCIe Slot 4
|
|
*/
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c11 {
|
|
status = "okay";
|
|
|
|
pca9552: pca9552@60 {
|
|
compatible = "nxp,pca9552";
|
|
reg = <0x60>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
|
|
"GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
|
|
"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
|
|
"GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
|
|
"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
|
|
"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
|
|
"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
|
|
"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
|
|
|
|
gpio@0 {
|
|
reg = <0>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@1 {
|
|
reg = <1>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@2 {
|
|
reg = <2>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@3 {
|
|
reg = <3>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@4 {
|
|
reg = <4>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@5 {
|
|
reg = <5>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@6 {
|
|
reg = <6>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@7 {
|
|
reg = <7>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@8 {
|
|
reg = <8>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@9 {
|
|
reg = <9>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@10 {
|
|
reg = <10>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@11 {
|
|
reg = <11>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@12 {
|
|
reg = <12>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@13 {
|
|
reg = <13>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@14 {
|
|
reg = <14>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
|
|
gpio@15 {
|
|
reg = <15>;
|
|
type = <PCA955X_TYPE_GPIO>;
|
|
};
|
|
};
|
|
|
|
rtc@32 {
|
|
compatible = "epson,rx8900";
|
|
reg = <0x32>;
|
|
};
|
|
|
|
eeprom@51 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
ucd90160@64 {
|
|
compatible = "ti,ucd90160";
|
|
reg = <0x64>;
|
|
};
|
|
};
|
|
|
|
&i2c12 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c13 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vuart {
|
|
status = "okay";
|
|
};
|
|
|
|
&gfx {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
aspeed,external-nodes = <&gfx &lhc>;
|
|
};
|
|
|
|
&wdt1 {
|
|
aspeed,reset-type = "none";
|
|
aspeed,external-signal;
|
|
aspeed,ext-push-pull;
|
|
aspeed,ext-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdtrst1_default>;
|
|
};
|
|
|
|
&wdt2 {
|
|
aspeed,alt-boot;
|
|
};
|
|
|
|
&ibt {
|
|
status = "okay";
|
|
};
|