mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 08:33:45 +07:00
6481d5ed07
Gen9+ need to disable GMBUS clock gating when doing multi part transfers. Otherwise clock gating will kick in when GMBUS is in the WAIT state and presumably that will corrupt the transfer. This is documented as Display WA #0868. Apparently older hardware doesn't allow clock gating in the WAIT state and thus are unaffected by this problem. v2: Limit the PCH w/a to gen9 and gen10 only (DK) Actually change it to check the PCH type instead since it's the PCH that actually contains the GMBUS hardware Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20171221202432.17373-1-ville.syrjala@linux.intel.com
825 lines
21 KiB
C
825 lines
21 KiB
C
/*
|
|
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
|
|
* Copyright © 2006-2008,2010 Intel Corporation
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eric Anholt <eric@anholt.net>
|
|
* Chris Wilson <chris@chris-wilson.co.uk>
|
|
*/
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/export.h>
|
|
#include <drm/drmP.h>
|
|
#include "intel_drv.h"
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
|
|
struct gmbus_pin {
|
|
const char *name;
|
|
i915_reg_t reg;
|
|
};
|
|
|
|
/* Map gmbus pin pairs to names and registers. */
|
|
static const struct gmbus_pin gmbus_pins[] = {
|
|
[GMBUS_PIN_SSC] = { "ssc", GPIOB },
|
|
[GMBUS_PIN_VGADDC] = { "vga", GPIOA },
|
|
[GMBUS_PIN_PANEL] = { "panel", GPIOC },
|
|
[GMBUS_PIN_DPC] = { "dpc", GPIOD },
|
|
[GMBUS_PIN_DPB] = { "dpb", GPIOE },
|
|
[GMBUS_PIN_DPD] = { "dpd", GPIOF },
|
|
};
|
|
|
|
static const struct gmbus_pin gmbus_pins_bdw[] = {
|
|
[GMBUS_PIN_VGADDC] = { "vga", GPIOA },
|
|
[GMBUS_PIN_DPC] = { "dpc", GPIOD },
|
|
[GMBUS_PIN_DPB] = { "dpb", GPIOE },
|
|
[GMBUS_PIN_DPD] = { "dpd", GPIOF },
|
|
};
|
|
|
|
static const struct gmbus_pin gmbus_pins_skl[] = {
|
|
[GMBUS_PIN_DPC] = { "dpc", GPIOD },
|
|
[GMBUS_PIN_DPB] = { "dpb", GPIOE },
|
|
[GMBUS_PIN_DPD] = { "dpd", GPIOF },
|
|
};
|
|
|
|
static const struct gmbus_pin gmbus_pins_bxt[] = {
|
|
[GMBUS_PIN_1_BXT] = { "dpb", GPIOB },
|
|
[GMBUS_PIN_2_BXT] = { "dpc", GPIOC },
|
|
[GMBUS_PIN_3_BXT] = { "misc", GPIOD },
|
|
};
|
|
|
|
static const struct gmbus_pin gmbus_pins_cnp[] = {
|
|
[GMBUS_PIN_1_BXT] = { "dpb", GPIOB },
|
|
[GMBUS_PIN_2_BXT] = { "dpc", GPIOC },
|
|
[GMBUS_PIN_3_BXT] = { "misc", GPIOD },
|
|
[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
|
|
};
|
|
|
|
/* pin is expected to be valid */
|
|
static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
|
|
unsigned int pin)
|
|
{
|
|
if (HAS_PCH_CNP(dev_priv))
|
|
return &gmbus_pins_cnp[pin];
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
return &gmbus_pins_bxt[pin];
|
|
else if (IS_GEN9_BC(dev_priv))
|
|
return &gmbus_pins_skl[pin];
|
|
else if (IS_BROADWELL(dev_priv))
|
|
return &gmbus_pins_bdw[pin];
|
|
else
|
|
return &gmbus_pins[pin];
|
|
}
|
|
|
|
bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
|
|
unsigned int pin)
|
|
{
|
|
unsigned int size;
|
|
|
|
if (HAS_PCH_CNP(dev_priv))
|
|
size = ARRAY_SIZE(gmbus_pins_cnp);
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
size = ARRAY_SIZE(gmbus_pins_bxt);
|
|
else if (IS_GEN9_BC(dev_priv))
|
|
size = ARRAY_SIZE(gmbus_pins_skl);
|
|
else if (IS_BROADWELL(dev_priv))
|
|
size = ARRAY_SIZE(gmbus_pins_bdw);
|
|
else
|
|
size = ARRAY_SIZE(gmbus_pins);
|
|
|
|
return pin < size &&
|
|
i915_mmio_reg_valid(get_gmbus_pin(dev_priv, pin)->reg);
|
|
}
|
|
|
|
/* Intel GPIO access functions */
|
|
|
|
#define I2C_RISEFALL_TIME 10
|
|
|
|
static inline struct intel_gmbus *
|
|
to_intel_gmbus(struct i2c_adapter *i2c)
|
|
{
|
|
return container_of(i2c, struct intel_gmbus, adapter);
|
|
}
|
|
|
|
void
|
|
intel_i2c_reset(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(GMBUS0, 0);
|
|
I915_WRITE(GMBUS4, 0);
|
|
}
|
|
|
|
static void pnv_gmbus_clock_gating(struct drm_i915_private *dev_priv,
|
|
bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
/* When using bit bashing for I2C, this bit needs to be set to 1 */
|
|
val = I915_READ(DSPCLK_GATE_D);
|
|
if (!enable)
|
|
val |= PNV_GMBUSUNIT_CLOCK_GATE_DISABLE;
|
|
else
|
|
val &= ~PNV_GMBUSUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(DSPCLK_GATE_D, val);
|
|
}
|
|
|
|
static void pch_gmbus_clock_gating(struct drm_i915_private *dev_priv,
|
|
bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = I915_READ(SOUTH_DSPCLK_GATE_D);
|
|
if (!enable)
|
|
val |= PCH_GMBUSUNIT_CLOCK_GATE_DISABLE;
|
|
else
|
|
val &= ~PCH_GMBUSUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
|
|
}
|
|
|
|
static void bxt_gmbus_clock_gating(struct drm_i915_private *dev_priv,
|
|
bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = I915_READ(GEN9_CLKGATE_DIS_4);
|
|
if (!enable)
|
|
val |= BXT_GMBUS_GATING_DIS;
|
|
else
|
|
val &= ~BXT_GMBUS_GATING_DIS;
|
|
I915_WRITE(GEN9_CLKGATE_DIS_4, val);
|
|
}
|
|
|
|
static u32 get_reserved(struct intel_gmbus *bus)
|
|
{
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
u32 reserved = 0;
|
|
|
|
/* On most chips, these bits must be preserved in software. */
|
|
if (!IS_I830(dev_priv) && !IS_I845G(dev_priv))
|
|
reserved = I915_READ_NOTRACE(bus->gpio_reg) &
|
|
(GPIO_DATA_PULLUP_DISABLE |
|
|
GPIO_CLOCK_PULLUP_DISABLE);
|
|
|
|
return reserved;
|
|
}
|
|
|
|
static int get_clock(void *data)
|
|
{
|
|
struct intel_gmbus *bus = data;
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
u32 reserved = get_reserved(bus);
|
|
I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_CLOCK_DIR_MASK);
|
|
I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
|
|
return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_CLOCK_VAL_IN) != 0;
|
|
}
|
|
|
|
static int get_data(void *data)
|
|
{
|
|
struct intel_gmbus *bus = data;
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
u32 reserved = get_reserved(bus);
|
|
I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_DATA_DIR_MASK);
|
|
I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
|
|
return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_DATA_VAL_IN) != 0;
|
|
}
|
|
|
|
static void set_clock(void *data, int state_high)
|
|
{
|
|
struct intel_gmbus *bus = data;
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
u32 reserved = get_reserved(bus);
|
|
u32 clock_bits;
|
|
|
|
if (state_high)
|
|
clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
|
|
else
|
|
clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
|
|
GPIO_CLOCK_VAL_MASK;
|
|
|
|
I915_WRITE_NOTRACE(bus->gpio_reg, reserved | clock_bits);
|
|
POSTING_READ(bus->gpio_reg);
|
|
}
|
|
|
|
static void set_data(void *data, int state_high)
|
|
{
|
|
struct intel_gmbus *bus = data;
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
u32 reserved = get_reserved(bus);
|
|
u32 data_bits;
|
|
|
|
if (state_high)
|
|
data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
|
|
else
|
|
data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
|
|
GPIO_DATA_VAL_MASK;
|
|
|
|
I915_WRITE_NOTRACE(bus->gpio_reg, reserved | data_bits);
|
|
POSTING_READ(bus->gpio_reg);
|
|
}
|
|
|
|
static int
|
|
intel_gpio_pre_xfer(struct i2c_adapter *adapter)
|
|
{
|
|
struct intel_gmbus *bus = container_of(adapter,
|
|
struct intel_gmbus,
|
|
adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
|
|
intel_i2c_reset(dev_priv);
|
|
|
|
if (IS_PINEVIEW(dev_priv))
|
|
pnv_gmbus_clock_gating(dev_priv, false);
|
|
|
|
set_data(bus, 1);
|
|
set_clock(bus, 1);
|
|
udelay(I2C_RISEFALL_TIME);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
intel_gpio_post_xfer(struct i2c_adapter *adapter)
|
|
{
|
|
struct intel_gmbus *bus = container_of(adapter,
|
|
struct intel_gmbus,
|
|
adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
|
|
set_data(bus, 1);
|
|
set_clock(bus, 1);
|
|
|
|
if (IS_PINEVIEW(dev_priv))
|
|
pnv_gmbus_clock_gating(dev_priv, true);
|
|
}
|
|
|
|
static void
|
|
intel_gpio_setup(struct intel_gmbus *bus, unsigned int pin)
|
|
{
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
struct i2c_algo_bit_data *algo;
|
|
|
|
algo = &bus->bit_algo;
|
|
|
|
bus->gpio_reg = _MMIO(dev_priv->gpio_mmio_base +
|
|
i915_mmio_reg_offset(get_gmbus_pin(dev_priv, pin)->reg));
|
|
bus->adapter.algo_data = algo;
|
|
algo->setsda = set_data;
|
|
algo->setscl = set_clock;
|
|
algo->getsda = get_data;
|
|
algo->getscl = get_clock;
|
|
algo->pre_xfer = intel_gpio_pre_xfer;
|
|
algo->post_xfer = intel_gpio_post_xfer;
|
|
algo->udelay = I2C_RISEFALL_TIME;
|
|
algo->timeout = usecs_to_jiffies(2200);
|
|
algo->data = bus;
|
|
}
|
|
|
|
static int gmbus_wait(struct drm_i915_private *dev_priv, u32 status, u32 irq_en)
|
|
{
|
|
DEFINE_WAIT(wait);
|
|
u32 gmbus2;
|
|
int ret;
|
|
|
|
/* Important: The hw handles only the first bit, so set only one! Since
|
|
* we also need to check for NAKs besides the hw ready/idle signal, we
|
|
* need to wake up periodically and check that ourselves.
|
|
*/
|
|
if (!HAS_GMBUS_IRQ(dev_priv))
|
|
irq_en = 0;
|
|
|
|
add_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
|
|
I915_WRITE_FW(GMBUS4, irq_en);
|
|
|
|
status |= GMBUS_SATOER;
|
|
ret = wait_for_us((gmbus2 = I915_READ_FW(GMBUS2)) & status, 2);
|
|
if (ret)
|
|
ret = wait_for((gmbus2 = I915_READ_FW(GMBUS2)) & status, 50);
|
|
|
|
I915_WRITE_FW(GMBUS4, 0);
|
|
remove_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
|
|
|
|
if (gmbus2 & GMBUS_SATOER)
|
|
return -ENXIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
gmbus_wait_idle(struct drm_i915_private *dev_priv)
|
|
{
|
|
DEFINE_WAIT(wait);
|
|
u32 irq_enable;
|
|
int ret;
|
|
|
|
/* Important: The hw handles only the first bit, so set only one! */
|
|
irq_enable = 0;
|
|
if (HAS_GMBUS_IRQ(dev_priv))
|
|
irq_enable = GMBUS_IDLE_EN;
|
|
|
|
add_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
|
|
I915_WRITE_FW(GMBUS4, irq_enable);
|
|
|
|
ret = intel_wait_for_register_fw(dev_priv,
|
|
GMBUS2, GMBUS_ACTIVE, 0,
|
|
10);
|
|
|
|
I915_WRITE_FW(GMBUS4, 0);
|
|
remove_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
|
|
unsigned short addr, u8 *buf, unsigned int len,
|
|
u32 gmbus1_index)
|
|
{
|
|
I915_WRITE_FW(GMBUS1,
|
|
gmbus1_index |
|
|
GMBUS_CYCLE_WAIT |
|
|
(len << GMBUS_BYTE_COUNT_SHIFT) |
|
|
(addr << GMBUS_SLAVE_ADDR_SHIFT) |
|
|
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
|
|
while (len) {
|
|
int ret;
|
|
u32 val, loop = 0;
|
|
|
|
ret = gmbus_wait(dev_priv, GMBUS_HW_RDY, GMBUS_HW_RDY_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = I915_READ_FW(GMBUS3);
|
|
do {
|
|
*buf++ = val & 0xff;
|
|
val >>= 8;
|
|
} while (--len && ++loop < 4);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
|
|
u32 gmbus1_index)
|
|
{
|
|
u8 *buf = msg->buf;
|
|
unsigned int rx_size = msg->len;
|
|
unsigned int len;
|
|
int ret;
|
|
|
|
do {
|
|
len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
|
|
|
|
ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
|
|
buf, len, gmbus1_index);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rx_size -= len;
|
|
buf += len;
|
|
} while (rx_size != 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
|
|
unsigned short addr, u8 *buf, unsigned int len)
|
|
{
|
|
unsigned int chunk_size = len;
|
|
u32 val, loop;
|
|
|
|
val = loop = 0;
|
|
while (len && loop < 4) {
|
|
val |= *buf++ << (8 * loop++);
|
|
len -= 1;
|
|
}
|
|
|
|
I915_WRITE_FW(GMBUS3, val);
|
|
I915_WRITE_FW(GMBUS1,
|
|
GMBUS_CYCLE_WAIT |
|
|
(chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
|
|
(addr << GMBUS_SLAVE_ADDR_SHIFT) |
|
|
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
|
|
while (len) {
|
|
int ret;
|
|
|
|
val = loop = 0;
|
|
do {
|
|
val |= *buf++ << (8 * loop);
|
|
} while (--len && ++loop < 4);
|
|
|
|
I915_WRITE_FW(GMBUS3, val);
|
|
|
|
ret = gmbus_wait(dev_priv, GMBUS_HW_RDY, GMBUS_HW_RDY_EN);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
|
|
{
|
|
u8 *buf = msg->buf;
|
|
unsigned int tx_size = msg->len;
|
|
unsigned int len;
|
|
int ret;
|
|
|
|
do {
|
|
len = min(tx_size, GMBUS_BYTE_COUNT_MAX);
|
|
|
|
ret = gmbus_xfer_write_chunk(dev_priv, msg->addr, buf, len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
buf += len;
|
|
tx_size -= len;
|
|
} while (tx_size != 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The gmbus controller can combine a 1 or 2 byte write with a read that
|
|
* immediately follows it by using an "INDEX" cycle.
|
|
*/
|
|
static bool
|
|
gmbus_is_index_read(struct i2c_msg *msgs, int i, int num)
|
|
{
|
|
return (i + 1 < num &&
|
|
msgs[i].addr == msgs[i + 1].addr &&
|
|
!(msgs[i].flags & I2C_M_RD) &&
|
|
(msgs[i].len == 1 || msgs[i].len == 2) &&
|
|
(msgs[i + 1].flags & I2C_M_RD));
|
|
}
|
|
|
|
static int
|
|
gmbus_xfer_index_read(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
|
|
{
|
|
u32 gmbus1_index = 0;
|
|
u32 gmbus5 = 0;
|
|
int ret;
|
|
|
|
if (msgs[0].len == 2)
|
|
gmbus5 = GMBUS_2BYTE_INDEX_EN |
|
|
msgs[0].buf[1] | (msgs[0].buf[0] << 8);
|
|
if (msgs[0].len == 1)
|
|
gmbus1_index = GMBUS_CYCLE_INDEX |
|
|
(msgs[0].buf[0] << GMBUS_SLAVE_INDEX_SHIFT);
|
|
|
|
/* GMBUS5 holds 16-bit index */
|
|
if (gmbus5)
|
|
I915_WRITE_FW(GMBUS5, gmbus5);
|
|
|
|
ret = gmbus_xfer_read(dev_priv, &msgs[1], gmbus1_index);
|
|
|
|
/* Clear GMBUS5 after each index transfer */
|
|
if (gmbus5)
|
|
I915_WRITE_FW(GMBUS5, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct intel_gmbus *bus = container_of(adapter,
|
|
struct intel_gmbus,
|
|
adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
int i = 0, inc, try = 0;
|
|
int ret = 0;
|
|
|
|
/* Display WA #0868: skl,bxt,kbl,cfl,glk,cnl */
|
|
if (IS_GEN9_LP(dev_priv))
|
|
bxt_gmbus_clock_gating(dev_priv, false);
|
|
else if (HAS_PCH_SPT(dev_priv) ||
|
|
HAS_PCH_KBP(dev_priv) || HAS_PCH_CNP(dev_priv))
|
|
pch_gmbus_clock_gating(dev_priv, false);
|
|
|
|
retry:
|
|
I915_WRITE_FW(GMBUS0, bus->reg0);
|
|
|
|
for (; i < num; i += inc) {
|
|
inc = 1;
|
|
if (gmbus_is_index_read(msgs, i, num)) {
|
|
ret = gmbus_xfer_index_read(dev_priv, &msgs[i]);
|
|
inc = 2; /* an index read is two msgs */
|
|
} else if (msgs[i].flags & I2C_M_RD) {
|
|
ret = gmbus_xfer_read(dev_priv, &msgs[i], 0);
|
|
} else {
|
|
ret = gmbus_xfer_write(dev_priv, &msgs[i]);
|
|
}
|
|
|
|
if (!ret)
|
|
ret = gmbus_wait(dev_priv,
|
|
GMBUS_HW_WAIT_PHASE, GMBUS_HW_WAIT_EN);
|
|
if (ret == -ETIMEDOUT)
|
|
goto timeout;
|
|
else if (ret)
|
|
goto clear_err;
|
|
}
|
|
|
|
/* Generate a STOP condition on the bus. Note that gmbus can't generata
|
|
* a STOP on the very first cycle. To simplify the code we
|
|
* unconditionally generate the STOP condition with an additional gmbus
|
|
* cycle. */
|
|
I915_WRITE_FW(GMBUS1, GMBUS_CYCLE_STOP | GMBUS_SW_RDY);
|
|
|
|
/* Mark the GMBUS interface as disabled after waiting for idle.
|
|
* We will re-enable it at the start of the next xfer,
|
|
* till then let it sleep.
|
|
*/
|
|
if (gmbus_wait_idle(dev_priv)) {
|
|
DRM_DEBUG_KMS("GMBUS [%s] timed out waiting for idle\n",
|
|
adapter->name);
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
I915_WRITE_FW(GMBUS0, 0);
|
|
ret = ret ?: i;
|
|
goto out;
|
|
|
|
clear_err:
|
|
/*
|
|
* Wait for bus to IDLE before clearing NAK.
|
|
* If we clear the NAK while bus is still active, then it will stay
|
|
* active and the next transaction may fail.
|
|
*
|
|
* If no ACK is received during the address phase of a transaction, the
|
|
* adapter must report -ENXIO. It is not clear what to return if no ACK
|
|
* is received at other times. But we have to be careful to not return
|
|
* spurious -ENXIO because that will prevent i2c and drm edid functions
|
|
* from retrying. So return -ENXIO only when gmbus properly quiescents -
|
|
* timing out seems to happen when there _is_ a ddc chip present, but
|
|
* it's slow responding and only answers on the 2nd retry.
|
|
*/
|
|
ret = -ENXIO;
|
|
if (gmbus_wait_idle(dev_priv)) {
|
|
DRM_DEBUG_KMS("GMBUS [%s] timed out after NAK\n",
|
|
adapter->name);
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
/* Toggle the Software Clear Interrupt bit. This has the effect
|
|
* of resetting the GMBUS controller and so clearing the
|
|
* BUS_ERROR raised by the slave's NAK.
|
|
*/
|
|
I915_WRITE_FW(GMBUS1, GMBUS_SW_CLR_INT);
|
|
I915_WRITE_FW(GMBUS1, 0);
|
|
I915_WRITE_FW(GMBUS0, 0);
|
|
|
|
DRM_DEBUG_KMS("GMBUS [%s] NAK for addr: %04x %c(%d)\n",
|
|
adapter->name, msgs[i].addr,
|
|
(msgs[i].flags & I2C_M_RD) ? 'r' : 'w', msgs[i].len);
|
|
|
|
/*
|
|
* Passive adapters sometimes NAK the first probe. Retry the first
|
|
* message once on -ENXIO for GMBUS transfers; the bit banging algorithm
|
|
* has retries internally. See also the retry loop in
|
|
* drm_do_probe_ddc_edid, which bails out on the first -ENXIO.
|
|
*/
|
|
if (ret == -ENXIO && i == 0 && try++ == 0) {
|
|
DRM_DEBUG_KMS("GMBUS [%s] NAK on first message, retry\n",
|
|
adapter->name);
|
|
goto retry;
|
|
}
|
|
|
|
goto out;
|
|
|
|
timeout:
|
|
DRM_DEBUG_KMS("GMBUS [%s] timed out, falling back to bit banging on pin %d\n",
|
|
bus->adapter.name, bus->reg0 & 0xff);
|
|
I915_WRITE_FW(GMBUS0, 0);
|
|
|
|
/*
|
|
* Hardware may not support GMBUS over these pins? Try GPIO bitbanging
|
|
* instead. Use EAGAIN to have i2c core retry.
|
|
*/
|
|
ret = -EAGAIN;
|
|
|
|
out:
|
|
/* Display WA #0868: skl,bxt,kbl,cfl,glk,cnl */
|
|
if (IS_GEN9_LP(dev_priv))
|
|
bxt_gmbus_clock_gating(dev_priv, true);
|
|
else if (HAS_PCH_SPT(dev_priv) ||
|
|
HAS_PCH_KBP(dev_priv) || HAS_PCH_CNP(dev_priv))
|
|
pch_gmbus_clock_gating(dev_priv, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct intel_gmbus *bus = container_of(adapter, struct intel_gmbus,
|
|
adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
int ret;
|
|
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
|
|
|
|
if (bus->force_bit) {
|
|
ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
|
|
if (ret < 0)
|
|
bus->force_bit &= ~GMBUS_FORCE_BIT_RETRY;
|
|
} else {
|
|
ret = do_gmbus_xfer(adapter, msgs, num);
|
|
if (ret == -EAGAIN)
|
|
bus->force_bit |= GMBUS_FORCE_BIT_RETRY;
|
|
}
|
|
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 gmbus_func(struct i2c_adapter *adapter)
|
|
{
|
|
return i2c_bit_algo.functionality(adapter) &
|
|
(I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
|
|
/* I2C_FUNC_10BIT_ADDR | */
|
|
I2C_FUNC_SMBUS_READ_BLOCK_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_PROC_CALL);
|
|
}
|
|
|
|
static const struct i2c_algorithm gmbus_algorithm = {
|
|
.master_xfer = gmbus_xfer,
|
|
.functionality = gmbus_func
|
|
};
|
|
|
|
static void gmbus_lock_bus(struct i2c_adapter *adapter,
|
|
unsigned int flags)
|
|
{
|
|
struct intel_gmbus *bus = to_intel_gmbus(adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
|
|
mutex_lock(&dev_priv->gmbus_mutex);
|
|
}
|
|
|
|
static int gmbus_trylock_bus(struct i2c_adapter *adapter,
|
|
unsigned int flags)
|
|
{
|
|
struct intel_gmbus *bus = to_intel_gmbus(adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
|
|
return mutex_trylock(&dev_priv->gmbus_mutex);
|
|
}
|
|
|
|
static void gmbus_unlock_bus(struct i2c_adapter *adapter,
|
|
unsigned int flags)
|
|
{
|
|
struct intel_gmbus *bus = to_intel_gmbus(adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
|
|
mutex_unlock(&dev_priv->gmbus_mutex);
|
|
}
|
|
|
|
static const struct i2c_lock_operations gmbus_lock_ops = {
|
|
.lock_bus = gmbus_lock_bus,
|
|
.trylock_bus = gmbus_trylock_bus,
|
|
.unlock_bus = gmbus_unlock_bus,
|
|
};
|
|
|
|
/**
|
|
* intel_gmbus_setup - instantiate all Intel i2c GMBuses
|
|
* @dev_priv: i915 device private
|
|
*/
|
|
int intel_setup_gmbus(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
struct intel_gmbus *bus;
|
|
unsigned int pin;
|
|
int ret;
|
|
|
|
if (HAS_PCH_NOP(dev_priv))
|
|
return 0;
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
dev_priv->gpio_mmio_base = VLV_DISPLAY_BASE;
|
|
else if (!HAS_GMCH_DISPLAY(dev_priv))
|
|
dev_priv->gpio_mmio_base =
|
|
i915_mmio_reg_offset(PCH_GPIOA) -
|
|
i915_mmio_reg_offset(GPIOA);
|
|
|
|
mutex_init(&dev_priv->gmbus_mutex);
|
|
init_waitqueue_head(&dev_priv->gmbus_wait_queue);
|
|
|
|
for (pin = 0; pin < ARRAY_SIZE(dev_priv->gmbus); pin++) {
|
|
if (!intel_gmbus_is_valid_pin(dev_priv, pin))
|
|
continue;
|
|
|
|
bus = &dev_priv->gmbus[pin];
|
|
|
|
bus->adapter.owner = THIS_MODULE;
|
|
bus->adapter.class = I2C_CLASS_DDC;
|
|
snprintf(bus->adapter.name,
|
|
sizeof(bus->adapter.name),
|
|
"i915 gmbus %s",
|
|
get_gmbus_pin(dev_priv, pin)->name);
|
|
|
|
bus->adapter.dev.parent = &pdev->dev;
|
|
bus->dev_priv = dev_priv;
|
|
|
|
bus->adapter.algo = &gmbus_algorithm;
|
|
bus->adapter.lock_ops = &gmbus_lock_ops;
|
|
|
|
/*
|
|
* We wish to retry with bit banging
|
|
* after a timed out GMBUS attempt.
|
|
*/
|
|
bus->adapter.retries = 1;
|
|
|
|
/* By default use a conservative clock rate */
|
|
bus->reg0 = pin | GMBUS_RATE_100KHZ;
|
|
|
|
/* gmbus seems to be broken on i830 */
|
|
if (IS_I830(dev_priv))
|
|
bus->force_bit = 1;
|
|
|
|
intel_gpio_setup(bus, pin);
|
|
|
|
ret = i2c_add_adapter(&bus->adapter);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
intel_i2c_reset(dev_priv);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
while (pin--) {
|
|
if (!intel_gmbus_is_valid_pin(dev_priv, pin))
|
|
continue;
|
|
|
|
bus = &dev_priv->gmbus[pin];
|
|
i2c_del_adapter(&bus->adapter);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv,
|
|
unsigned int pin)
|
|
{
|
|
if (WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin)))
|
|
return NULL;
|
|
|
|
return &dev_priv->gmbus[pin].adapter;
|
|
}
|
|
|
|
void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
|
|
{
|
|
struct intel_gmbus *bus = to_intel_gmbus(adapter);
|
|
|
|
bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | speed;
|
|
}
|
|
|
|
void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
|
|
{
|
|
struct intel_gmbus *bus = to_intel_gmbus(adapter);
|
|
struct drm_i915_private *dev_priv = bus->dev_priv;
|
|
|
|
mutex_lock(&dev_priv->gmbus_mutex);
|
|
|
|
bus->force_bit += force_bit ? 1 : -1;
|
|
DRM_DEBUG_KMS("%sabling bit-banging on %s. force bit now %d\n",
|
|
force_bit ? "en" : "dis", adapter->name,
|
|
bus->force_bit);
|
|
|
|
mutex_unlock(&dev_priv->gmbus_mutex);
|
|
}
|
|
|
|
void intel_teardown_gmbus(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct intel_gmbus *bus;
|
|
unsigned int pin;
|
|
|
|
for (pin = 0; pin < ARRAY_SIZE(dev_priv->gmbus); pin++) {
|
|
if (!intel_gmbus_is_valid_pin(dev_priv, pin))
|
|
continue;
|
|
|
|
bus = &dev_priv->gmbus[pin];
|
|
i2c_del_adapter(&bus->adapter);
|
|
}
|
|
}
|