mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 01:46:48 +07:00
74ba9207e1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
669 lines
20 KiB
C
669 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
|
|
* Kyosti Malkki <kmalkki@cc.hut.fi>
|
|
* Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
|
|
* Jean Delvare <jdelvare@suse.de>
|
|
*
|
|
* Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
|
|
* and advice of Greg Kroah-Hartman.
|
|
*
|
|
* Notes about the port:
|
|
* Release 0x00 of the GL518SM chipset doesn't support reading of in0,
|
|
* in1 nor in2. The original driver had an ugly workaround to get them
|
|
* anyway (changing limits and watching alarms trigger and wear off).
|
|
* We did not keep that part of the original driver in the Linux 2.6
|
|
* version, since it was making the driver significantly more complex
|
|
* with no real benefit.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
|
|
|
|
enum chips { gl518sm_r00, gl518sm_r80 };
|
|
|
|
/* Many GL518 constants specified below */
|
|
|
|
/* The GL518 registers */
|
|
#define GL518_REG_CHIP_ID 0x00
|
|
#define GL518_REG_REVISION 0x01
|
|
#define GL518_REG_VENDOR_ID 0x02
|
|
#define GL518_REG_CONF 0x03
|
|
#define GL518_REG_TEMP_IN 0x04
|
|
#define GL518_REG_TEMP_MAX 0x05
|
|
#define GL518_REG_TEMP_HYST 0x06
|
|
#define GL518_REG_FAN_COUNT 0x07
|
|
#define GL518_REG_FAN_LIMIT 0x08
|
|
#define GL518_REG_VIN1_LIMIT 0x09
|
|
#define GL518_REG_VIN2_LIMIT 0x0a
|
|
#define GL518_REG_VIN3_LIMIT 0x0b
|
|
#define GL518_REG_VDD_LIMIT 0x0c
|
|
#define GL518_REG_VIN3 0x0d
|
|
#define GL518_REG_MISC 0x0f
|
|
#define GL518_REG_ALARM 0x10
|
|
#define GL518_REG_MASK 0x11
|
|
#define GL518_REG_INT 0x12
|
|
#define GL518_REG_VIN2 0x13
|
|
#define GL518_REG_VIN1 0x14
|
|
#define GL518_REG_VDD 0x15
|
|
|
|
|
|
/*
|
|
* Conversions. Rounding and limit checking is only done on the TO_REG
|
|
* variants. Note that you should be a bit careful with which arguments
|
|
* these macros are called: arguments may be evaluated more than once.
|
|
* Fixing this is just not worth it.
|
|
*/
|
|
|
|
#define RAW_FROM_REG(val) val
|
|
|
|
#define BOOL_FROM_REG(val) ((val) ? 0 : 1)
|
|
#define BOOL_TO_REG(val) ((val) ? 0 : 1)
|
|
|
|
#define TEMP_CLAMP(val) clamp_val(val, -119000, 136000)
|
|
#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 119)
|
|
#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
|
|
|
|
static inline u8 FAN_TO_REG(long rpm, int div)
|
|
{
|
|
long rpmdiv;
|
|
if (rpm == 0)
|
|
return 0;
|
|
rpmdiv = clamp_val(rpm, 1, 960000) * div;
|
|
return clamp_val((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
|
|
}
|
|
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div))))
|
|
|
|
#define IN_CLAMP(val) clamp_val(val, 0, 255 * 19)
|
|
#define IN_TO_REG(val) DIV_ROUND_CLOSEST(IN_CLAMP(val), 19)
|
|
#define IN_FROM_REG(val) ((val) * 19)
|
|
|
|
#define VDD_CLAMP(val) clamp_val(val, 0, 255 * 95 / 4)
|
|
#define VDD_TO_REG(val) DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95)
|
|
#define VDD_FROM_REG(val) DIV_ROUND_CLOSEST((val) * 95, 4)
|
|
|
|
#define DIV_FROM_REG(val) (1 << (val))
|
|
|
|
#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
|
|
#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
|
|
|
|
/* Each client has this additional data */
|
|
struct gl518_data {
|
|
struct i2c_client *client;
|
|
const struct attribute_group *groups[3];
|
|
enum chips type;
|
|
|
|
struct mutex update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
u8 voltage_in[4]; /* Register values; [0] = VDD */
|
|
u8 voltage_min[4]; /* Register values; [0] = VDD */
|
|
u8 voltage_max[4]; /* Register values; [0] = VDD */
|
|
u8 fan_in[2];
|
|
u8 fan_min[2];
|
|
u8 fan_div[2]; /* Register encoding, shifted right */
|
|
u8 fan_auto1; /* Boolean */
|
|
u8 temp_in; /* Register values */
|
|
u8 temp_max; /* Register values */
|
|
u8 temp_hyst; /* Register values */
|
|
u8 alarms; /* Register value */
|
|
u8 alarm_mask;
|
|
u8 beep_mask; /* Register value */
|
|
u8 beep_enable; /* Boolean */
|
|
};
|
|
|
|
/*
|
|
* Registers 0x07 to 0x0c are word-sized, others are byte-sized
|
|
* GL518 uses a high-byte first convention, which is exactly opposite to
|
|
* the SMBus standard.
|
|
*/
|
|
static int gl518_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
if ((reg >= 0x07) && (reg <= 0x0c))
|
|
return i2c_smbus_read_word_swapped(client, reg);
|
|
else
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
{
|
|
if ((reg >= 0x07) && (reg <= 0x0c))
|
|
return i2c_smbus_write_word_swapped(client, reg, value);
|
|
else
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
static struct gl518_data *gl518_update_device(struct device *dev)
|
|
{
|
|
struct gl518_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int val;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
dev_dbg(&client->dev, "Starting gl518 update\n");
|
|
|
|
data->alarms = gl518_read_value(client, GL518_REG_INT);
|
|
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
|
|
|
val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
|
|
data->voltage_min[0] = val & 0xff;
|
|
data->voltage_max[0] = (val >> 8) & 0xff;
|
|
val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
|
|
data->voltage_min[1] = val & 0xff;
|
|
data->voltage_max[1] = (val >> 8) & 0xff;
|
|
val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
|
|
data->voltage_min[2] = val & 0xff;
|
|
data->voltage_max[2] = (val >> 8) & 0xff;
|
|
val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
|
|
data->voltage_min[3] = val & 0xff;
|
|
data->voltage_max[3] = (val >> 8) & 0xff;
|
|
|
|
val = gl518_read_value(client, GL518_REG_FAN_COUNT);
|
|
data->fan_in[0] = (val >> 8) & 0xff;
|
|
data->fan_in[1] = val & 0xff;
|
|
|
|
val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
|
data->fan_min[0] = (val >> 8) & 0xff;
|
|
data->fan_min[1] = val & 0xff;
|
|
|
|
data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
|
|
data->temp_max =
|
|
gl518_read_value(client, GL518_REG_TEMP_MAX);
|
|
data->temp_hyst =
|
|
gl518_read_value(client, GL518_REG_TEMP_HYST);
|
|
|
|
val = gl518_read_value(client, GL518_REG_MISC);
|
|
data->fan_div[0] = (val >> 6) & 0x03;
|
|
data->fan_div[1] = (val >> 4) & 0x03;
|
|
data->fan_auto1 = (val >> 3) & 0x01;
|
|
|
|
data->alarms &= data->alarm_mask;
|
|
|
|
val = gl518_read_value(client, GL518_REG_CONF);
|
|
data->beep_enable = (val >> 2) & 1;
|
|
|
|
if (data->type != gl518sm_r00) {
|
|
data->voltage_in[0] =
|
|
gl518_read_value(client, GL518_REG_VDD);
|
|
data->voltage_in[1] =
|
|
gl518_read_value(client, GL518_REG_VIN1);
|
|
data->voltage_in[2] =
|
|
gl518_read_value(client, GL518_REG_VIN2);
|
|
}
|
|
data->voltage_in[3] =
|
|
gl518_read_value(client, GL518_REG_VIN3);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
#define show(type, suffix, value) \
|
|
static ssize_t show_##suffix(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct gl518_data *data = gl518_update_device(dev); \
|
|
return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
|
|
}
|
|
|
|
show(TEMP, temp_input1, temp_in);
|
|
show(TEMP, temp_max1, temp_max);
|
|
show(TEMP, temp_hyst1, temp_hyst);
|
|
show(BOOL, fan_auto1, fan_auto1);
|
|
show(VDD, in_input0, voltage_in[0]);
|
|
show(IN, in_input1, voltage_in[1]);
|
|
show(IN, in_input2, voltage_in[2]);
|
|
show(IN, in_input3, voltage_in[3]);
|
|
show(VDD, in_min0, voltage_min[0]);
|
|
show(IN, in_min1, voltage_min[1]);
|
|
show(IN, in_min2, voltage_min[2]);
|
|
show(IN, in_min3, voltage_min[3]);
|
|
show(VDD, in_max0, voltage_max[0]);
|
|
show(IN, in_max1, voltage_max[1]);
|
|
show(IN, in_max2, voltage_max[2]);
|
|
show(IN, in_max3, voltage_max[3]);
|
|
show(RAW, alarms, alarms);
|
|
show(BOOL, beep_enable, beep_enable);
|
|
show(BEEP_MASK, beep_mask, beep_mask);
|
|
|
|
static ssize_t fan_input_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(attr)->index;
|
|
struct gl518_data *data = gl518_update_device(dev);
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
|
|
DIV_FROM_REG(data->fan_div[nr])));
|
|
}
|
|
|
|
static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(attr)->index;
|
|
struct gl518_data *data = gl518_update_device(dev);
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
|
|
DIV_FROM_REG(data->fan_div[nr])));
|
|
}
|
|
|
|
static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(attr)->index;
|
|
struct gl518_data *data = gl518_update_device(dev);
|
|
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
|
|
}
|
|
|
|
#define set(type, suffix, value, reg) \
|
|
static ssize_t set_##suffix(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
struct gl518_data *data = dev_get_drvdata(dev); \
|
|
struct i2c_client *client = data->client; \
|
|
long val; \
|
|
int err = kstrtol(buf, 10, &val); \
|
|
if (err) \
|
|
return err; \
|
|
\
|
|
mutex_lock(&data->update_lock); \
|
|
data->value = type##_TO_REG(val); \
|
|
gl518_write_value(client, reg, data->value); \
|
|
mutex_unlock(&data->update_lock); \
|
|
return count; \
|
|
}
|
|
|
|
#define set_bits(type, suffix, value, reg, mask, shift) \
|
|
static ssize_t set_##suffix(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
struct gl518_data *data = dev_get_drvdata(dev); \
|
|
struct i2c_client *client = data->client; \
|
|
int regvalue; \
|
|
unsigned long val; \
|
|
int err = kstrtoul(buf, 10, &val); \
|
|
if (err) \
|
|
return err; \
|
|
\
|
|
mutex_lock(&data->update_lock); \
|
|
regvalue = gl518_read_value(client, reg); \
|
|
data->value = type##_TO_REG(val); \
|
|
regvalue = (regvalue & ~mask) | (data->value << shift); \
|
|
gl518_write_value(client, reg, regvalue); \
|
|
mutex_unlock(&data->update_lock); \
|
|
return count; \
|
|
}
|
|
|
|
#define set_low(type, suffix, value, reg) \
|
|
set_bits(type, suffix, value, reg, 0x00ff, 0)
|
|
#define set_high(type, suffix, value, reg) \
|
|
set_bits(type, suffix, value, reg, 0xff00, 8)
|
|
|
|
set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
|
|
set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
|
|
set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
|
|
set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
|
|
set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
|
|
set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
|
|
set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
|
|
set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
|
|
set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
|
|
set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
|
|
set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
|
|
set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
|
|
set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
|
|
|
|
static ssize_t fan_min_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct gl518_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int nr = to_sensor_dev_attr(attr)->index;
|
|
int regvalue;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
|
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
|
|
regvalue = (regvalue & (0xff << (8 * nr)))
|
|
| (data->fan_min[nr] << (8 * (1 - nr)));
|
|
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
|
|
|
|
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
|
if (data->fan_min[nr] == 0)
|
|
data->alarm_mask &= ~(0x20 << nr);
|
|
else
|
|
data->alarm_mask |= (0x20 << nr);
|
|
data->beep_mask &= data->alarm_mask;
|
|
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t fan_div_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct gl518_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int nr = to_sensor_dev_attr(attr)->index;
|
|
int regvalue;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
switch (val) {
|
|
case 1:
|
|
val = 0;
|
|
break;
|
|
case 2:
|
|
val = 1;
|
|
break;
|
|
case 4:
|
|
val = 2;
|
|
break;
|
|
case 8:
|
|
val = 3;
|
|
break;
|
|
default:
|
|
dev_err(dev,
|
|
"Invalid fan clock divider %lu, choose one of 1, 2, 4 or 8\n",
|
|
val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
regvalue = gl518_read_value(client, GL518_REG_MISC);
|
|
data->fan_div[nr] = val;
|
|
regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
|
|
| (data->fan_div[nr] << (6 - 2 * nr));
|
|
gl518_write_value(client, GL518_REG_MISC, regvalue);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(temp1_input, 0444, show_temp_input1, NULL);
|
|
static DEVICE_ATTR(temp1_max, 0644, show_temp_max1, set_temp_max1);
|
|
static DEVICE_ATTR(temp1_max_hyst, 0644,
|
|
show_temp_hyst1, set_temp_hyst1);
|
|
static DEVICE_ATTR(fan1_auto, 0644, show_fan_auto1, set_fan_auto1);
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
|
|
static DEVICE_ATTR(in0_input, 0444, show_in_input0, NULL);
|
|
static DEVICE_ATTR(in1_input, 0444, show_in_input1, NULL);
|
|
static DEVICE_ATTR(in2_input, 0444, show_in_input2, NULL);
|
|
static DEVICE_ATTR(in3_input, 0444, show_in_input3, NULL);
|
|
static DEVICE_ATTR(in0_min, 0644, show_in_min0, set_in_min0);
|
|
static DEVICE_ATTR(in1_min, 0644, show_in_min1, set_in_min1);
|
|
static DEVICE_ATTR(in2_min, 0644, show_in_min2, set_in_min2);
|
|
static DEVICE_ATTR(in3_min, 0644, show_in_min3, set_in_min3);
|
|
static DEVICE_ATTR(in0_max, 0644, show_in_max0, set_in_max0);
|
|
static DEVICE_ATTR(in1_max, 0644, show_in_max1, set_in_max1);
|
|
static DEVICE_ATTR(in2_max, 0644, show_in_max2, set_in_max2);
|
|
static DEVICE_ATTR(in3_max, 0644, show_in_max3, set_in_max3);
|
|
static DEVICE_ATTR(alarms, 0444, show_alarms, NULL);
|
|
static DEVICE_ATTR(beep_enable, 0644,
|
|
show_beep_enable, set_beep_enable);
|
|
static DEVICE_ATTR(beep_mask, 0644,
|
|
show_beep_mask, set_beep_mask);
|
|
|
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
struct gl518_data *data = gl518_update_device(dev);
|
|
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6);
|
|
|
|
static ssize_t beep_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
struct gl518_data *data = gl518_update_device(dev);
|
|
return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
|
|
}
|
|
|
|
static ssize_t beep_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct gl518_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
unsigned long bit;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &bit);
|
|
if (err)
|
|
return err;
|
|
|
|
if (bit & ~1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
|
if (bit)
|
|
data->beep_mask |= (1 << bitnr);
|
|
else
|
|
data->beep_mask &= ~(1 << bitnr);
|
|
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6);
|
|
|
|
static struct attribute *gl518_attributes[] = {
|
|
&dev_attr_in3_input.attr,
|
|
&dev_attr_in0_min.attr,
|
|
&dev_attr_in1_min.attr,
|
|
&dev_attr_in2_min.attr,
|
|
&dev_attr_in3_min.attr,
|
|
&dev_attr_in0_max.attr,
|
|
&dev_attr_in1_max.attr,
|
|
&dev_attr_in2_max.attr,
|
|
&dev_attr_in3_max.attr,
|
|
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in0_beep.dev_attr.attr,
|
|
&sensor_dev_attr_in1_beep.dev_attr.attr,
|
|
&sensor_dev_attr_in2_beep.dev_attr.attr,
|
|
&sensor_dev_attr_in3_beep.dev_attr.attr,
|
|
|
|
&dev_attr_fan1_auto.attr,
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_div.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_div.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_beep.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_beep.dev_attr.attr,
|
|
|
|
&dev_attr_temp1_input.attr,
|
|
&dev_attr_temp1_max.attr,
|
|
&dev_attr_temp1_max_hyst.attr,
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_beep.dev_attr.attr,
|
|
|
|
&dev_attr_alarms.attr,
|
|
&dev_attr_beep_enable.attr,
|
|
&dev_attr_beep_mask.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group gl518_group = {
|
|
.attrs = gl518_attributes,
|
|
};
|
|
|
|
static struct attribute *gl518_attributes_r80[] = {
|
|
&dev_attr_in0_input.attr,
|
|
&dev_attr_in1_input.attr,
|
|
&dev_attr_in2_input.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group gl518_group_r80 = {
|
|
.attrs = gl518_attributes_r80,
|
|
};
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int rev;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
/* Now, we do the remaining detection. */
|
|
if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
|
|
|| (gl518_read_value(client, GL518_REG_CONF) & 0x80))
|
|
return -ENODEV;
|
|
|
|
/* Determine the chip type. */
|
|
rev = gl518_read_value(client, GL518_REG_REVISION);
|
|
if (rev != 0x00 && rev != 0x80)
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called when we have found a new GL518SM.
|
|
* Note that we preserve D4:NoFan2 and D2:beep_enable.
|
|
*/
|
|
static void gl518_init_client(struct i2c_client *client)
|
|
{
|
|
/* Make sure we leave D7:Reset untouched */
|
|
u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
|
|
|
|
/* Comparator mode (D3=0), standby mode (D6=0) */
|
|
gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
|
|
|
|
/* Never interrupts */
|
|
gl518_write_value(client, GL518_REG_MASK, 0x00);
|
|
|
|
/* Clear status register (D5=1), start (D6=1) */
|
|
gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
|
|
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
|
|
}
|
|
|
|
static int gl518_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct gl518_data *data;
|
|
int revision;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct gl518_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
revision = gl518_read_value(client, GL518_REG_REVISION);
|
|
data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the GL518SM chip */
|
|
data->alarm_mask = 0xff;
|
|
gl518_init_client(client);
|
|
|
|
/* sysfs hooks */
|
|
data->groups[0] = &gl518_group;
|
|
if (data->type == gl518sm_r80)
|
|
data->groups[1] = &gl518_group_r80;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
|
data, data->groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id gl518_id[] = {
|
|
{ "gl518sm", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, gl518_id);
|
|
|
|
static struct i2c_driver gl518_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "gl518sm",
|
|
},
|
|
.probe = gl518_probe,
|
|
.id_table = gl518_id,
|
|
.detect = gl518_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(gl518_driver);
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
"Kyosti Malkki <kmalkki@cc.hut.fi> and "
|
|
"Hong-Gunn Chew <hglinux@gunnet.org>");
|
|
MODULE_DESCRIPTION("GL518SM driver");
|
|
MODULE_LICENSE("GPL");
|