mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 21:16:54 +07:00
87d66f2806
Add support for the XUSB pad controller found on Tegra210 SoCs. The hardware is roughly the same, but some of the registers have been moved around and the number and type of supported pads has changed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2046 lines
60 KiB
C
2046 lines
60 KiB
C
/*
|
|
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
|
|
* Copyright (C) 2015 Google, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk/tegra.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mailbox_client.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <soc/tegra/fuse.h>
|
|
|
|
#include "xusb.h"
|
|
|
|
#define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) \
|
|
((x) ? (11 + ((x) - 1) * 6) : 0)
|
|
#define FUSE_SKU_CALIB_HS_CURR_LEVEL_PAD_MASK 0x3f
|
|
#define FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_SHIFT 7
|
|
#define FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_MASK 0xf
|
|
|
|
#define FUSE_USB_CALIB_EXT_RPD_CTRL_SHIFT 0
|
|
#define FUSE_USB_CALIB_EXT_RPD_CTRL_MASK 0x1f
|
|
|
|
#define XUSB_PADCTL_USB2_PAD_MUX 0x004
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT 16
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_MASK 0x3
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_XUSB 0x1
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT 18
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK 0x3
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB 0x1
|
|
|
|
#define XUSB_PADCTL_USB2_PORT_CAP 0x008
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(x) (0x1 << ((x) * 4))
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(x) (0x3 << ((x) * 4))
|
|
|
|
#define XUSB_PADCTL_SS_PORT_MAP 0x014
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(x) (1 << (((x) * 5) + 4))
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5)
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5))
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5))
|
|
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1 0x024
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30)
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN (1 << 29)
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(x) (1 << (2 + (x) * 3))
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(x) \
|
|
(1 << (1 + (x) * 3))
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(x) (1 << ((x) * 3))
|
|
|
|
#define XUSB_PADCTL_USB3_PAD_MUX 0x028
|
|
#define XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) (1 << (1 + (x)))
|
|
#define XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(x) (1 << (8 + (x)))
|
|
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD2 (1 << 27)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD (1 << 26)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_SHIFT 0
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_MASK 0x3f
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x08c + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_SHIFT 26
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_MASK 0x1f
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_SHIFT 3
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_MASK 0xf
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR (1 << 2)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD (1 << 1)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD (1 << 0)
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD (1 << 11)
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_SHIFT 3
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_MASK 0x7
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_VAL 0x7
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT 0
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK 0x7
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_VAL 0x2
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK (1 << 26)
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT 19
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL 0x0a
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT 12
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL 0x1e
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE (1 << 18)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA1 (1 << 17)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA0 (1 << 16)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPD_STROBE (1 << 15)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 (1 << 14)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 (1 << 13)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_STROBE (1 << 9)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA1 (1 << 8)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA0 (1 << 7)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_STROBE (1 << 6)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA1 (1 << 5)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA0 (1 << 4)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_STROBE (1 << 3)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA1 (1 << 2)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA0 (1 << 1)
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL1(x) (0x304 + (x) * 0x20)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_SHIFT 0
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_MASK 0xf
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL2(x) (0x308 + (x) * 0x20)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_SHIFT 8
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_MASK 0xf
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_SHIFT 0
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_MASK 0xff
|
|
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL 0x340
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_PD_TRK (1 << 19)
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_SHIFT 12
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_VAL 0x0a
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_SHIFT 5
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_VAL 0x1e
|
|
|
|
#define XUSB_PADCTL_HSIC_STRB_TRIM_CONTROL 0x344
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT 20
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_MASK 0xff
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_USB_VAL 0x19
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SATA_VAL 0x1e
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_LOCKDET_STATUS (1 << 15)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD (1 << 4)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_ENABLE (1 << 3)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_SHIFT 1
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_IDDQ (1 << 0)
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL2 0x364
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT 4
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_MASK 0xffffff
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_VAL 0x136
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD (1 << 2)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE (1 << 1)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN (1 << 0)
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN (1 << 15)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT 12
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_USB_VAL 0x2
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SATA_VAL 0x0
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_REFCLKBUF_EN (1 << 8)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_SHIFT 4
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_MASK 0xf
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL5 0x370
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_MASK 0xff
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_VAL 0x2a
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL8 0x37c
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE (1 << 31)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD (1 << 15)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN (1 << 13)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN (1 << 12)
|
|
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL1(x) (0x460 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_SHIFT 20
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_VAL 0x1
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN BIT(18)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD BIT(13)
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL1 0x860
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL2 0x864
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL4 0x86c
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL5 0x870
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL8 0x87c
|
|
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL1 0x960
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(x) (0xa60 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_VAL 0x2
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(x) (0xa64 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT 0
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_MASK 0xffff
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_VAL 0x00fc
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL3(x) (0xa68 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL3_RX_DFE_VAL 0xc0077f1f
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(x) (0xa6c + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_MASK 0xffff
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_VAL 0x01c7
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(x) (0xa74 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL 0xfcf01368
|
|
|
|
struct tegra210_xusb_fuse_calibration {
|
|
u32 hs_curr_level[4];
|
|
u32 hs_term_range_adj;
|
|
u32 rpd_ctrl;
|
|
};
|
|
|
|
struct tegra210_xusb_padctl {
|
|
struct tegra_xusb_padctl base;
|
|
|
|
struct tegra210_xusb_fuse_calibration fuse;
|
|
};
|
|
|
|
static inline struct tegra210_xusb_padctl *
|
|
to_tegra210_xusb_padctl(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
return container_of(padctl, struct tegra210_xusb_padctl, base);
|
|
}
|
|
|
|
/* must be called under padctl->lock */
|
|
static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
|
|
unsigned long timeout;
|
|
u32 value;
|
|
int err;
|
|
|
|
if (pcie->enable > 0) {
|
|
pcie->enable++;
|
|
return 0;
|
|
}
|
|
|
|
err = clk_prepare_enable(pcie->pll);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = reset_control_deassert(pcie->rst);
|
|
if (err < 0)
|
|
goto disable;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL5);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL5);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_SHIFT));
|
|
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT) |
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT));
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_IDDQ;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL4_REFCLKBUF_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_ENABLE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL1_LOCKDET_STATUS)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN |
|
|
XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
tegra210_xusb_pll_hw_control_enable();
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
tegra210_xusb_pll_hw_sequence_start();
|
|
|
|
pcie->enable++;
|
|
|
|
return 0;
|
|
|
|
reset:
|
|
reset_control_assert(pcie->rst);
|
|
disable:
|
|
clk_disable_unprepare(pcie->pll);
|
|
return err;
|
|
}
|
|
|
|
static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (WARN_ON(pcie->enable == 0))
|
|
goto unlock;
|
|
|
|
if (--pcie->enable > 0)
|
|
goto unlock;
|
|
|
|
reset_control_assert(pcie->rst);
|
|
clk_disable_unprepare(pcie->pll);
|
|
|
|
unlock:
|
|
mutex_unlock(&padctl->lock);
|
|
}
|
|
|
|
/* must be called under padctl->lock */
|
|
static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
|
|
unsigned long timeout;
|
|
u32 value;
|
|
int err;
|
|
|
|
if (sata->enable > 0) {
|
|
sata->enable++;
|
|
return 0;
|
|
}
|
|
|
|
err = clk_prepare_enable(sata->pll);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = reset_control_deassert(sata->rst);
|
|
if (err < 0)
|
|
goto disable;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL5);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL5);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_SHIFT));
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN;
|
|
|
|
if (usb)
|
|
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT);
|
|
else
|
|
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SATA_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT);
|
|
|
|
/* XXX PLL0_XDIGCLK_EN */
|
|
/*
|
|
value &= ~(1 << 19);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
*/
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT));
|
|
|
|
if (usb)
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT;
|
|
else
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SATA_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_IDDQ;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL4_REFCLKBUF_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_ENABLE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL1_LOCKDET_STATUS)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN |
|
|
XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
tegra210_sata_pll_hw_control_enable();
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
tegra210_sata_pll_hw_sequence_start();
|
|
|
|
sata->enable++;
|
|
|
|
return 0;
|
|
|
|
reset:
|
|
reset_control_assert(sata->rst);
|
|
disable:
|
|
clk_disable_unprepare(sata->pll);
|
|
return err;
|
|
}
|
|
|
|
static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (WARN_ON(sata->enable == 0))
|
|
goto unlock;
|
|
|
|
if (--sata->enable > 0)
|
|
goto unlock;
|
|
|
|
reset_control_assert(sata->rst);
|
|
clk_disable_unprepare(sata->pll);
|
|
|
|
unlock:
|
|
mutex_unlock(&padctl->lock);
|
|
}
|
|
|
|
static int tegra210_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
u32 value;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (padctl->enable++ > 0)
|
|
goto out;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
out:
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
u32 value;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (WARN_ON(padctl->enable == 0))
|
|
goto out;
|
|
|
|
if (--padctl->enable > 0)
|
|
goto out;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
out:
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl,
|
|
unsigned int index, bool idle)
|
|
{
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_STROBE);
|
|
|
|
if (idle)
|
|
value |= XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE;
|
|
else
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
|
|
unsigned int index, bool enable)
|
|
{
|
|
struct tegra_xusb_port *port;
|
|
struct tegra_xusb_lane *lane;
|
|
u32 value, offset;
|
|
|
|
port = tegra_xusb_find_port(padctl, "usb3", index);
|
|
if (!port)
|
|
return -ENODEV;
|
|
|
|
lane = port->lane;
|
|
|
|
if (lane->pad == padctl->pcie)
|
|
offset = XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL1(lane->index);
|
|
else
|
|
offset = XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL1;
|
|
|
|
value = padctl_readl(padctl, offset);
|
|
|
|
value &= ~((XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_MASK <<
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_SHIFT) |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD);
|
|
|
|
if (!enable) {
|
|
value |= (XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_VAL <<
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_SHIFT) |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD;
|
|
}
|
|
|
|
padctl_writel(padctl, value, offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define TEGRA210_LANE(_name, _offset, _shift, _mask, _type) \
|
|
{ \
|
|
.name = _name, \
|
|
.offset = _offset, \
|
|
.shift = _shift, \
|
|
.mask = _mask, \
|
|
.num_funcs = ARRAY_SIZE(tegra210_##_type##_functions), \
|
|
.funcs = tegra210_##_type##_functions, \
|
|
}
|
|
|
|
static const char *tegra210_usb2_functions[] = {
|
|
"snps",
|
|
"xusb",
|
|
"uart"
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_usb2_lanes[] = {
|
|
TEGRA210_LANE("usb2-0", 0x004, 0, 0x3, usb2),
|
|
TEGRA210_LANE("usb2-1", 0x004, 2, 0x3, usb2),
|
|
TEGRA210_LANE("usb2-2", 0x004, 4, 0x3, usb2),
|
|
TEGRA210_LANE("usb2-3", 0x004, 6, 0x3, usb2),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_usb2_lane *usb2;
|
|
int err;
|
|
|
|
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
|
|
if (!usb2)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&usb2->base.list);
|
|
usb2->base.soc = &pad->soc->lanes[index];
|
|
usb2->base.index = index;
|
|
usb2->base.pad = pad;
|
|
usb2->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&usb2->base, np);
|
|
if (err < 0) {
|
|
kfree(usb2);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &usb2->base;
|
|
}
|
|
|
|
static void tegra210_usb2_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
|
|
|
|
kfree(usb2);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_usb2_lane_ops = {
|
|
.probe = tegra210_usb2_lane_probe,
|
|
.remove = tegra210_usb2_lane_remove,
|
|
};
|
|
|
|
static int tegra210_usb2_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
|
|
value &= ~(XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
|
|
|
|
return tegra210_xusb_padctl_enable(padctl);
|
|
}
|
|
|
|
static int tegra210_usb2_phy_exit(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
return tegra210_xusb_padctl_disable(lane->pad->padctl);
|
|
}
|
|
|
|
static int tegra210_usb2_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
|
|
struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv;
|
|
struct tegra_xusb_usb2_port *port;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
int err;
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
if (!port) {
|
|
dev_err(&phy->dev, "no port found for USB2 lane %u\n", index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv = to_tegra210_xusb_padctl(padctl);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) |
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_SHIFT));
|
|
value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_SHIFT);
|
|
|
|
if (tegra_sku_info.revision < TEGRA_REVISION_A02)
|
|
value |=
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
|
|
value &= ~XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(index);
|
|
value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
value &= ~((XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_MASK <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_SHIFT) |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD2 |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI);
|
|
value |= (priv->fuse.hs_curr_level[index] +
|
|
usb2->hs_curr_level_offset) <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
value &= ~((XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_MASK <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_SHIFT) |
|
|
(XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_MASK <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_SHIFT) |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD);
|
|
value |= (priv->fuse.hs_term_range_adj <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_SHIFT) |
|
|
(priv->fuse.rpd_ctrl <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
value = padctl_readl(padctl,
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
|
|
value &= ~(XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK <<
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
|
|
padctl_writel(padctl, value,
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
|
|
|
|
err = regulator_enable(port->supply);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (pad->enable > 0) {
|
|
pad->enable++;
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
err = clk_prepare_enable(pad->clk);
|
|
if (err)
|
|
goto disable_regulator;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
|
|
value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
udelay(1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
udelay(50);
|
|
|
|
clk_disable_unprepare(pad->clk);
|
|
|
|
pad->enable++;
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
|
|
disable_regulator:
|
|
regulator_disable(port->supply);
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_usb2_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra_xusb_usb2_port *port;
|
|
u32 value;
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, lane->index);
|
|
if (!port) {
|
|
dev_err(&phy->dev, "no port found for USB2 lane %u\n",
|
|
lane->index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (WARN_ON(pad->enable == 0))
|
|
goto out;
|
|
|
|
if (--pad->enable > 0)
|
|
goto out;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
out:
|
|
regulator_disable(port->supply);
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_usb2_phy_ops = {
|
|
.init = tegra210_usb2_phy_init,
|
|
.exit = tegra210_usb2_phy_exit,
|
|
.power_on = tegra210_usb2_phy_power_on,
|
|
.power_off = tegra210_usb2_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_usb2_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_usb2_pad *usb2;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
|
|
if (!usb2)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &usb2->base;
|
|
pad->ops = &tegra210_usb2_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(usb2);
|
|
goto out;
|
|
}
|
|
|
|
usb2->clk = devm_clk_get(&pad->dev, "trk");
|
|
if (IS_ERR(usb2->clk)) {
|
|
err = PTR_ERR(usb2->clk);
|
|
dev_err(&pad->dev, "failed to get trk clock: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_usb2_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_usb2_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
|
|
|
|
kfree(usb2);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_usb2_ops = {
|
|
.probe = tegra210_usb2_pad_probe,
|
|
.remove = tegra210_usb2_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_usb2_pad = {
|
|
.name = "usb2",
|
|
.num_lanes = ARRAY_SIZE(tegra210_usb2_lanes),
|
|
.lanes = tegra210_usb2_lanes,
|
|
.ops = &tegra210_usb2_ops,
|
|
};
|
|
|
|
static const char *tegra210_hsic_functions[] = {
|
|
"snps",
|
|
"xusb",
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_hsic_lanes[] = {
|
|
TEGRA210_LANE("hsic-0", 0x004, 14, 0x1, hsic),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_hsic_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_hsic_lane *hsic;
|
|
int err;
|
|
|
|
hsic = kzalloc(sizeof(*hsic), GFP_KERNEL);
|
|
if (!hsic)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&hsic->base.list);
|
|
hsic->base.soc = &pad->soc->lanes[index];
|
|
hsic->base.index = index;
|
|
hsic->base.pad = pad;
|
|
hsic->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&hsic->base, np);
|
|
if (err < 0) {
|
|
kfree(hsic);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &hsic->base;
|
|
}
|
|
|
|
static void tegra210_hsic_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_hsic_lane *hsic = to_hsic_lane(lane);
|
|
|
|
kfree(hsic);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_hsic_lane_ops = {
|
|
.probe = tegra210_hsic_lane_probe,
|
|
.remove = tegra210_hsic_lane_remove,
|
|
};
|
|
|
|
static int tegra210_hsic_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
|
|
value &= ~(XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_MASK <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_XUSB <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
|
|
|
|
return tegra210_xusb_padctl_enable(padctl);
|
|
}
|
|
|
|
static int tegra210_hsic_phy_exit(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
return tegra210_xusb_padctl_disable(lane->pad->padctl);
|
|
}
|
|
|
|
static int tegra210_hsic_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_hsic_lane *hsic = to_hsic_lane(lane);
|
|
struct tegra_xusb_hsic_pad *pad = to_hsic_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
int err;
|
|
|
|
priv = to_tegra210_xusb_padctl(padctl);
|
|
|
|
err = regulator_enable(pad->supply);
|
|
if (err)
|
|
return err;
|
|
|
|
padctl_writel(padctl, hsic->strobe_trim,
|
|
XUSB_PADCTL_HSIC_STRB_TRIM_CONTROL);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL1(index));
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_SHIFT);
|
|
value |= (hsic->tx_rtune_p <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL1(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL2(index));
|
|
value &= ~((XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_SHIFT) |
|
|
(XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_SHIFT));
|
|
value |= (hsic->rx_strobe_trim <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_SHIFT) |
|
|
(hsic->rx_data_trim <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL2(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_STROBE);
|
|
value |= XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_STROBE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
|
|
err = clk_prepare_enable(pad->clk);
|
|
if (err)
|
|
goto disable;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
value &= ~((XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_SHIFT));
|
|
value |= (XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_VAL <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_VAL <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
|
|
udelay(1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
value &= ~XUSB_PADCTL_HSIC_PAD_TRK_CTL_PD_TRK;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
|
|
udelay(50);
|
|
|
|
clk_disable_unprepare(pad->clk);
|
|
|
|
return 0;
|
|
|
|
disable:
|
|
regulator_disable(pad->supply);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_hsic_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_hsic_pad *pad = to_hsic_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
value |= XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_STROBE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL1(index));
|
|
|
|
regulator_disable(pad->supply);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_hsic_phy_ops = {
|
|
.init = tegra210_hsic_phy_init,
|
|
.exit = tegra210_hsic_phy_exit,
|
|
.power_on = tegra210_hsic_phy_power_on,
|
|
.power_off = tegra210_hsic_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_hsic_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_hsic_pad *hsic;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
hsic = kzalloc(sizeof(*hsic), GFP_KERNEL);
|
|
if (!hsic)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &hsic->base;
|
|
pad->ops = &tegra210_hsic_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(hsic);
|
|
goto out;
|
|
}
|
|
|
|
hsic->clk = devm_clk_get(&pad->dev, "trk");
|
|
if (IS_ERR(hsic->clk)) {
|
|
err = PTR_ERR(hsic->clk);
|
|
dev_err(&pad->dev, "failed to get trk clock: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_hsic_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_hsic_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_hsic_pad *hsic = to_hsic_pad(pad);
|
|
|
|
kfree(hsic);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_hsic_ops = {
|
|
.probe = tegra210_hsic_pad_probe,
|
|
.remove = tegra210_hsic_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_hsic_pad = {
|
|
.name = "hsic",
|
|
.num_lanes = ARRAY_SIZE(tegra210_hsic_lanes),
|
|
.lanes = tegra210_hsic_lanes,
|
|
.ops = &tegra210_hsic_ops,
|
|
};
|
|
|
|
static const char *tegra210_pcie_functions[] = {
|
|
"pcie-x1",
|
|
"usb3-ss",
|
|
"sata",
|
|
"pcie-x4",
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_pcie_lanes[] = {
|
|
TEGRA210_LANE("pcie-0", 0x028, 12, 0x3, pcie),
|
|
TEGRA210_LANE("pcie-1", 0x028, 14, 0x3, pcie),
|
|
TEGRA210_LANE("pcie-2", 0x028, 16, 0x3, pcie),
|
|
TEGRA210_LANE("pcie-3", 0x028, 18, 0x3, pcie),
|
|
TEGRA210_LANE("pcie-4", 0x028, 20, 0x3, pcie),
|
|
TEGRA210_LANE("pcie-5", 0x028, 22, 0x3, pcie),
|
|
TEGRA210_LANE("pcie-6", 0x028, 24, 0x3, pcie),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_pcie_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_pcie_lane *pcie;
|
|
int err;
|
|
|
|
pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
|
|
if (!pcie)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&pcie->base.list);
|
|
pcie->base.soc = &pad->soc->lanes[index];
|
|
pcie->base.index = index;
|
|
pcie->base.pad = pad;
|
|
pcie->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&pcie->base, np);
|
|
if (err < 0) {
|
|
kfree(pcie);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &pcie->base;
|
|
}
|
|
|
|
static void tegra210_pcie_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_pcie_lane *pcie = to_pcie_lane(lane);
|
|
|
|
kfree(pcie);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
|
|
.probe = tegra210_pcie_lane_probe,
|
|
.remove = tegra210_pcie_lane_remove,
|
|
};
|
|
|
|
static int tegra210_pcie_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
return tegra210_xusb_padctl_enable(lane->pad->padctl);
|
|
}
|
|
|
|
static int tegra210_pcie_phy_exit(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
return tegra210_xusb_padctl_disable(lane->pad->padctl);
|
|
}
|
|
|
|
static int tegra210_pcie_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
int err;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
err = tegra210_pex_uphy_enable(padctl);
|
|
if (err < 0)
|
|
goto unlock;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value |= XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
|
|
unlock:
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_pcie_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value &= ~XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
|
|
tegra210_pex_uphy_disable(padctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_pcie_phy_ops = {
|
|
.init = tegra210_pcie_phy_init,
|
|
.exit = tegra210_pcie_phy_exit,
|
|
.power_on = tegra210_pcie_phy_power_on,
|
|
.power_off = tegra210_pcie_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_pcie_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
|
|
if (!pcie)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &pcie->base;
|
|
pad->ops = &tegra210_pcie_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(pcie);
|
|
goto out;
|
|
}
|
|
|
|
pcie->pll = devm_clk_get(&pad->dev, "pll");
|
|
if (IS_ERR(pcie->pll)) {
|
|
err = PTR_ERR(pcie->pll);
|
|
dev_err(&pad->dev, "failed to get PLL: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
pcie->rst = devm_reset_control_get(&pad->dev, "phy");
|
|
if (IS_ERR(pcie->rst)) {
|
|
err = PTR_ERR(pcie->rst);
|
|
dev_err(&pad->dev, "failed to get PCIe pad reset: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_pcie_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_pcie_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(pad);
|
|
|
|
kfree(pcie);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_pcie_ops = {
|
|
.probe = tegra210_pcie_pad_probe,
|
|
.remove = tegra210_pcie_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_pcie_pad = {
|
|
.name = "pcie",
|
|
.num_lanes = ARRAY_SIZE(tegra210_pcie_lanes),
|
|
.lanes = tegra210_pcie_lanes,
|
|
.ops = &tegra210_pcie_ops,
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_sata_lanes[] = {
|
|
TEGRA210_LANE("sata-0", 0x028, 30, 0x3, pcie),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_sata_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_sata_lane *sata;
|
|
int err;
|
|
|
|
sata = kzalloc(sizeof(*sata), GFP_KERNEL);
|
|
if (!sata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&sata->base.list);
|
|
sata->base.soc = &pad->soc->lanes[index];
|
|
sata->base.index = index;
|
|
sata->base.pad = pad;
|
|
sata->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&sata->base, np);
|
|
if (err < 0) {
|
|
kfree(sata);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &sata->base;
|
|
}
|
|
|
|
static void tegra210_sata_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_sata_lane *sata = to_sata_lane(lane);
|
|
|
|
kfree(sata);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
|
|
.probe = tegra210_sata_lane_probe,
|
|
.remove = tegra210_sata_lane_remove,
|
|
};
|
|
|
|
static int tegra210_sata_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
return tegra210_xusb_padctl_enable(lane->pad->padctl);
|
|
}
|
|
|
|
static int tegra210_sata_phy_exit(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
return tegra210_xusb_padctl_disable(lane->pad->padctl);
|
|
}
|
|
|
|
static int tegra210_sata_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
int err;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
err = tegra210_sata_uphy_enable(padctl, false);
|
|
if (err < 0)
|
|
goto unlock;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value |= XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(lane->index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
|
|
unlock:
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_sata_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value &= ~XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(lane->index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
|
|
tegra210_sata_uphy_disable(lane->pad->padctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_sata_phy_ops = {
|
|
.init = tegra210_sata_phy_init,
|
|
.exit = tegra210_sata_phy_exit,
|
|
.power_on = tegra210_sata_phy_power_on,
|
|
.power_off = tegra210_sata_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_sata_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
sata = kzalloc(sizeof(*sata), GFP_KERNEL);
|
|
if (!sata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &sata->base;
|
|
pad->ops = &tegra210_sata_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(sata);
|
|
goto out;
|
|
}
|
|
|
|
sata->rst = devm_reset_control_get(&pad->dev, "phy");
|
|
if (IS_ERR(sata->rst)) {
|
|
err = PTR_ERR(sata->rst);
|
|
dev_err(&pad->dev, "failed to get SATA pad reset: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_sata_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_sata_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata = to_sata_pad(pad);
|
|
|
|
kfree(sata);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_sata_ops = {
|
|
.probe = tegra210_sata_pad_probe,
|
|
.remove = tegra210_sata_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_sata_pad = {
|
|
.name = "sata",
|
|
.num_lanes = ARRAY_SIZE(tegra210_sata_lanes),
|
|
.lanes = tegra210_sata_lanes,
|
|
.ops = &tegra210_sata_ops,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc * const tegra210_pads[] = {
|
|
&tegra210_usb2_pad,
|
|
&tegra210_hsic_pad,
|
|
&tegra210_pcie_pad,
|
|
&tegra210_sata_pad,
|
|
};
|
|
|
|
static int tegra210_usb2_port_enable(struct tegra_xusb_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void tegra210_usb2_port_disable(struct tegra_xusb_port *port)
|
|
{
|
|
}
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_usb2_port_map(struct tegra_xusb_port *port)
|
|
{
|
|
return tegra_xusb_find_lane(port->padctl, "usb2", port->index);
|
|
}
|
|
|
|
static const struct tegra_xusb_port_ops tegra210_usb2_port_ops = {
|
|
.enable = tegra210_usb2_port_enable,
|
|
.disable = tegra210_usb2_port_disable,
|
|
.map = tegra210_usb2_port_map,
|
|
};
|
|
|
|
static int tegra210_hsic_port_enable(struct tegra_xusb_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void tegra210_hsic_port_disable(struct tegra_xusb_port *port)
|
|
{
|
|
}
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_hsic_port_map(struct tegra_xusb_port *port)
|
|
{
|
|
return tegra_xusb_find_lane(port->padctl, "hsic", port->index);
|
|
}
|
|
|
|
static const struct tegra_xusb_port_ops tegra210_hsic_port_ops = {
|
|
.enable = tegra210_hsic_port_enable,
|
|
.disable = tegra210_hsic_port_disable,
|
|
.map = tegra210_hsic_port_map,
|
|
};
|
|
|
|
static int tegra210_usb3_port_enable(struct tegra_xusb_port *port)
|
|
{
|
|
struct tegra_xusb_usb3_port *usb3 = to_usb3_port(port);
|
|
struct tegra_xusb_padctl *padctl = port->padctl;
|
|
struct tegra_xusb_lane *lane = usb3->base.lane;
|
|
unsigned int index = port->index;
|
|
u32 value;
|
|
int err;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
|
|
|
|
if (!usb3->internal)
|
|
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
|
|
else
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
|
|
|
|
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(index);
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(index, usb3->port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
|
|
|
|
/*
|
|
* TODO: move this code into the PCIe/SATA PHY ->power_on() callbacks
|
|
* and conditionalize based on mux function? This seems to work, but
|
|
* might not be the exact proper sequence.
|
|
*/
|
|
err = regulator_enable(usb3->supply);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
|
|
value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
|
|
value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_MASK <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_VAL <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
|
|
|
|
padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL3_RX_DFE_VAL,
|
|
XUSB_PADCTL_UPHY_USB3_PADX_ECTL3(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
|
|
value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
|
|
|
|
padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL,
|
|
XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(index));
|
|
|
|
if (lane->pad == padctl->sata)
|
|
err = tegra210_sata_uphy_enable(padctl, true);
|
|
else
|
|
err = tegra210_pex_uphy_enable(padctl);
|
|
|
|
if (err) {
|
|
dev_err(&port->dev, "%s: failed to enable UPHY: %d\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra210_usb3_port_disable(struct tegra_xusb_port *port)
|
|
{
|
|
struct tegra_xusb_usb3_port *usb3 = to_usb3_port(port);
|
|
struct tegra_xusb_padctl *padctl = port->padctl;
|
|
struct tegra_xusb_lane *lane = port->lane;
|
|
unsigned int index = port->index;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(250, 350);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
if (lane->pad == padctl->sata)
|
|
tegra210_sata_uphy_disable(padctl);
|
|
else
|
|
tegra210_pex_uphy_disable(padctl);
|
|
|
|
regulator_disable(usb3->supply);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
|
|
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(index);
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(index, 0x7);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_map tegra210_usb3_map[] = {
|
|
{ 0, "pcie", 6 },
|
|
{ 1, "pcie", 5 },
|
|
{ 2, "pcie", 0 },
|
|
{ 2, "pcie", 3 },
|
|
{ 3, "pcie", 4 },
|
|
{ 3, "pcie", 4 },
|
|
{ 0, NULL, 0 }
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_usb3_port_map(struct tegra_xusb_port *port)
|
|
{
|
|
return tegra_xusb_port_find_lane(port, tegra210_usb3_map, "usb3-ss");
|
|
}
|
|
|
|
static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
|
|
.enable = tegra210_usb3_port_enable,
|
|
.disable = tegra210_usb3_port_disable,
|
|
.map = tegra210_usb3_port_map,
|
|
};
|
|
|
|
static int
|
|
tegra210_xusb_read_fuse_calibration(struct tegra210_xusb_fuse_calibration *fuse)
|
|
{
|
|
unsigned int i;
|
|
u32 value;
|
|
int err;
|
|
|
|
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fuse->hs_curr_level); i++) {
|
|
fuse->hs_curr_level[i] =
|
|
(value >> FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(i)) &
|
|
FUSE_SKU_CALIB_HS_CURR_LEVEL_PAD_MASK;
|
|
}
|
|
|
|
fuse->hs_term_range_adj =
|
|
(value >> FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_SHIFT) &
|
|
FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_MASK;
|
|
|
|
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
fuse->rpd_ctrl =
|
|
(value >> FUSE_USB_CALIB_EXT_RPD_CTRL_SHIFT) &
|
|
FUSE_USB_CALIB_EXT_RPD_CTRL_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct tegra_xusb_padctl *
|
|
tegra210_xusb_padctl_probe(struct device *dev,
|
|
const struct tegra_xusb_padctl_soc *soc)
|
|
{
|
|
struct tegra210_xusb_padctl *padctl;
|
|
int err;
|
|
|
|
padctl = devm_kzalloc(dev, sizeof(*padctl), GFP_KERNEL);
|
|
if (!padctl)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
padctl->base.dev = dev;
|
|
padctl->base.soc = soc;
|
|
|
|
err = tegra210_xusb_read_fuse_calibration(&padctl->fuse);
|
|
if (err < 0)
|
|
return ERR_PTR(err);
|
|
|
|
return &padctl->base;
|
|
}
|
|
|
|
static void tegra210_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
}
|
|
|
|
static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
|
|
.probe = tegra210_xusb_padctl_probe,
|
|
.remove = tegra210_xusb_padctl_remove,
|
|
.usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
|
|
.hsic_set_idle = tegra210_hsic_set_idle,
|
|
};
|
|
|
|
const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
|
|
.num_pads = ARRAY_SIZE(tegra210_pads),
|
|
.pads = tegra210_pads,
|
|
.ports = {
|
|
.usb2 = {
|
|
.ops = &tegra210_usb2_port_ops,
|
|
.count = 4,
|
|
},
|
|
.hsic = {
|
|
.ops = &tegra210_hsic_port_ops,
|
|
.count = 1,
|
|
},
|
|
.usb3 = {
|
|
.ops = &tegra210_usb3_port_ops,
|
|
.count = 4,
|
|
},
|
|
},
|
|
.ops = &tegra210_xusb_padctl_ops,
|
|
};
|
|
EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc);
|
|
|
|
MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
|
|
MODULE_DESCRIPTION("NVIDIA Tegra 210 XUSB Pad Controller driver");
|
|
MODULE_LICENSE("GPL v2");
|