AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-02 19:46:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
0e99b153be
linux_dsm_epyc7002/arch/arm/mach-orion5x/net2big-setup.c
Thomas Petazzoni 5d1190ea69 arm: mach-orion5x: convert to use mvebu-mbus driver 
This commit migrates the mach-orion5x platforms to use the mvebu-mbus
driver and therefore removes the Orion5x-specific addr-map code.

The dove_init_early() function now initializes the mvebu-mbus driver
by calling mvebu_mbus_init().

We also convert a number of orion5x_setup_xyz_win() calls to the
appropriate mvebu_mbus_add_window() calls, as each board was doing its
own setup for the NOR window or other devices. Ultimately, those
devices will be probed from the DT.

The common address decoding windows are now registered in the
orion5x_setup_wins() function. It is worth noting that the four PCIe
address decoding windows will ultimately no longer have to be
registered here: it will be done automatically by the PCIe driver once
Dove has been migrated to use the upcoming mvebu PCIe driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-15 14:06:34 +00:00

433 lines
11 KiB
C
Raw Blame History

/*
* arch/arm/mach-orion5x/net2big-setup.c
*
* LaCie 2Big Network NAS setup
*
* Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include <plat/orion-gpio.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* LaCie 2Big Network Info
****************************************************************************/
/*
* 512KB NOR flash Device bus boot chip select
*/
#define NET2BIG_NOR_BOOT_BASE 0xfff80000
#define NET2BIG_NOR_BOOT_SIZE SZ_512K
/*****************************************************************************
* 512KB NOR Flash on Boot Device
****************************************************************************/
/*
* TODO: Check write support on flash MX29LV400CBTC-70G
*/
static struct mtd_partition net2big_partitions[] = {
{
.name = "Full512kb",
.size = MTDPART_SIZ_FULL,
.offset = 0x00000000,
.mask_flags = MTD_WRITEABLE,
},
};
static struct physmap_flash_data net2big_nor_flash_data = {
.width = 1,
.parts = net2big_partitions,
.nr_parts = ARRAY_SIZE(net2big_partitions),
};
static struct resource net2big_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = NET2BIG_NOR_BOOT_BASE,
.end = NET2BIG_NOR_BOOT_BASE
+ NET2BIG_NOR_BOOT_SIZE - 1,
};
static struct platform_device net2big_nor_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &net2big_nor_flash_data,
},
.num_resources = 1,
.resource = &net2big_nor_flash_resource,
};
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data net2big_eth_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
/*****************************************************************************
* I2C devices
****************************************************************************/
/*
* i2c addr | chip | description
* 0x32 | Ricoh 5C372b | RTC
* 0x50 | HT24LC08 | eeprom (1kB)
*/
static struct i2c_board_info __initdata net2big_i2c_devices[] = {
{
I2C_BOARD_INFO("rs5c372b", 0x32),
}, {
I2C_BOARD_INFO("24c08", 0x50),
},
};
/*****************************************************************************
* SATA
****************************************************************************/
static struct mv_sata_platform_data net2big_sata_data = {
.n_ports = 2,
};
#define NET2BIG_GPIO_SATA_POWER_REQ 19
#define NET2BIG_GPIO_SATA0_POWER 23
#define NET2BIG_GPIO_SATA1_POWER 25
static void __init net2big_sata_power_init(void)
{
int err;
/* Configure GPIOs over MPP max number. */
orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
if (err == 0) {
err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
if (err)
gpio_free(NET2BIG_GPIO_SATA0_POWER);
}
if (err) {
pr_err("net2big: failed to setup SATA0 power GPIO\n");
return;
}
err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
if (err == 0) {
err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
if (err)
gpio_free(NET2BIG_GPIO_SATA1_POWER);
}
if (err) {
pr_err("net2big: failed to setup SATA1 power GPIO\n");
goto err_free_1;
}
err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
if (err == 0) {
err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
if (err)
gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
}
if (err) {
pr_err("net2big: failed to setup SATA power request GPIO\n");
goto err_free_2;
}
if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
return;
}
/*
* SATA power up on both disk is done by pulling high the CPLD power
* request line. The 300ms delay is related to the CPLD clock and is
* needed to be sure that the CPLD has take into account the low line
* status.
*/
msleep(300);
gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
pr_info("net2big: power up SATA hard disks\n");
return;
err_free_2:
gpio_free(NET2BIG_GPIO_SATA1_POWER);
err_free_1:
gpio_free(NET2BIG_GPIO_SATA0_POWER);
return;
}
/*****************************************************************************
* GPIO LEDs
****************************************************************************/
/*
* The power front LEDs (blue and red) and SATA red LEDs are controlled via a
* single GPIO line and are compatible with the leds-gpio driver.
*
* The SATA blue LEDs have some hardware blink capabilities which are detailed
* in the following array:
*
* SATAx blue LED | SATAx activity | LED state
* | |
* 0 | 0 | blink (rate 300ms)
* 1 | 0 | off
* ? | 1 | on
*
* Notes: The blue and the red front LED's can't be on at the same time.
* Blue LED have priority.
*/
#define NET2BIG_GPIO_PWR_RED_LED 6
#define NET2BIG_GPIO_PWR_BLUE_LED 16
#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7
#define NET2BIG_GPIO_SATA0_RED_LED 11
#define NET2BIG_GPIO_SATA1_RED_LED 10
#define NET2BIG_GPIO_SATA0_BLUE_LED 17
#define NET2BIG_GPIO_SATA1_BLUE_LED 13
static struct gpio_led net2big_leds[] = {
{
.name = "net2big:red:power",
.gpio = NET2BIG_GPIO_PWR_RED_LED,
},
{
.name = "net2big:blue:power",
.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
},
{
.name = "net2big:red:sata0",
.gpio = NET2BIG_GPIO_SATA0_RED_LED,
},
{
.name = "net2big:red:sata1",
.gpio = NET2BIG_GPIO_SATA1_RED_LED,
},
};
static struct gpio_led_platform_data net2big_led_data = {
.num_leds = ARRAY_SIZE(net2big_leds),
.leds = net2big_leds,
};
static struct platform_device net2big_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &net2big_led_data,
},
};
static void __init net2big_gpio_leds_init(void)
{
int err;
/* Stop initial CPLD slow red/blue blinking on power LED. */
err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
"Power LED blink stop");
if (err == 0) {
err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
if (err)
gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
}
if (err)
pr_err("net2big: failed to setup power LED blink GPIO\n");
/*
* Configure SATA0 and SATA1 blue LEDs to blink in relation with the
* hard disk activity.
*/
err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
"SATA0 blue LED control");
if (err == 0) {
err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
if (err)
gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
}
if (err)
pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
"SATA1 blue LED control");
if (err == 0) {
err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
if (err)
gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
}
if (err)
pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
platform_device_register(&net2big_gpio_leds);
}
/****************************************************************************
* GPIO keys
****************************************************************************/
#define NET2BIG_GPIO_PUSH_BUTTON 18
#define NET2BIG_GPIO_POWER_SWITCH_ON 8
#define NET2BIG_GPIO_POWER_SWITCH_OFF 9
#define NET2BIG_SWITCH_POWER_ON 0x1
#define NET2BIG_SWITCH_POWER_OFF 0x2
static struct gpio_keys_button net2big_buttons[] = {
{
.type = EV_SW,
.code = NET2BIG_SWITCH_POWER_OFF,
.gpio = NET2BIG_GPIO_POWER_SWITCH_OFF,
.desc = "Power rocker switch (auto|off)",
.active_low = 0,
},
{
.type = EV_SW,
.code = NET2BIG_SWITCH_POWER_ON,
.gpio = NET2BIG_GPIO_POWER_SWITCH_ON,
.desc = "Power rocker switch (on|auto)",
.active_low = 0,
},
{
.type = EV_KEY,
.code = KEY_POWER,
.gpio = NET2BIG_GPIO_PUSH_BUTTON,
.desc = "Front Push Button",
.active_low = 0,
},
};
static struct gpio_keys_platform_data net2big_button_data = {
.buttons = net2big_buttons,
.nbuttons = ARRAY_SIZE(net2big_buttons),
};
static struct platform_device net2big_gpio_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &net2big_button_data,
},
};
/*****************************************************************************
* General Setup
****************************************************************************/
static unsigned int net2big_mpp_modes[] __initdata = {
MPP0_GPIO, /* Raid mode (bit 0) */
MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
MPP2_GPIO, /* Raid mode (bit 1) */
MPP3_GPIO, /* Board ID (bit 0) */
MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */
MPP5_GPIO, /* Fan fail detection */
MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */
MPP7_GPIO, /* Disable initial blinking on front LED */
MPP8_GPIO, /* Rear power switch (on|auto) */
MPP9_GPIO, /* Rear power switch (auto|off) */
MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */
MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */
MPP12_GPIO, /* Board ID (bit 1) */
MPP13_GPIO, /* SATA 1 blue LED blink control */
MPP14_SATA_LED,
MPP15_SATA_LED,
MPP16_GPIO, /* Blue front LED control */
MPP17_GPIO, /* SATA 0 blue LED blink control */
MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
MPP19_GPIO, /* SATA{0,1} power On/Off request */
0,
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
/* 23: SATA 0 power status */
/* 24: Board power off */
/* 25: SATA 1 power status */
};
#define NET2BIG_GPIO_POWER_OFF 24
static void net2big_power_off(void)
{
gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
}
static void __init net2big_init(void)
{
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
orion5x_mpp_conf(net2big_mpp_modes);
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_ehci1_init();
orion5x_eth_init(&net2big_eth_data);
orion5x_i2c_init();
orion5x_uart0_init();
orion5x_xor_init();
net2big_sata_power_init();
orion5x_sata_init(&net2big_sata_data);
mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
NET2BIG_NOR_BOOT_SIZE);
platform_device_register(&net2big_nor_flash);
platform_device_register(&net2big_gpio_buttons);
net2big_gpio_leds_init();
i2c_register_board_info(0, net2big_i2c_devices,
ARRAY_SIZE(net2big_i2c_devices));
orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
pm_power_off = net2big_power_off;
else
pr_err("net2big: failed to configure power-off GPIO\n");
pr_notice("net2big: Flash writing is not yet supported.\n");
}
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
.atag_offset = 0x100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink